1

I have a MacBook Pro mid 2011. I've installed a SSD on the main bay, removed the optical drive and installed a caddy with the a regular HDD on it. The OS was installed on the SSD. This setup works fine!

Last week I had to force a shut down by pressing and holding the power button. After that, my system didn't boot. (a question mark apperars)

I install El Capitan again on my HDD and right now I'm trying to format/erase/restart my SSD.

If I change hard drives places (putting SSD in the caddy and HD on main bay) it works… I can erase the SSD, reformat, etc, using Disk Utility.

But with the HDD on caddy and the SSD on the main bay, my mac dont recognize my SDD and I can't erase, or format it.

My goal here is to reinstall El Capitan on SSD using it on the main bay because its faster and have a better performance.

Does anybody have an idea about it?

Improve this question

1 Answer 1

Reset to default
1

First, make sure it's not just a regular connectivity problem. I used to have an older MBP that displayed the same symptoms every now and then (with the stock HDD). Whenever it threw question-marks or missing file-system symbols at boot-time; I'd just pop it out, blow it like an old Nintendo cartridge, and pop it back in. If that's not the problem;

  1. Make sure your AC adapter is plugged in and connected to your Mac.
  2. Turn your Mac on, by hitting the power button, as per usual.
  3. Press and hold: ⌘ Command+R until you see the  Apple logo or the OS X Utilities.
  4. First off; you can try repairing and/or erasing your drive etc. via the Disk Utility.
  5. Finally; if all else fails, just select Reinstall OS X and follow the prompts.
  6. The installer requires Internet Access. You can choose a network from the Wi-Fi Menu.
    (top-right).
Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .