If I get a new Time Capsule, how can I transfer the backups from the old Time Capsule to the new one. I see an option to Archive the Time Capsule from the Airport Utility, but I don't see any way to restore. Do I have to go through the initial back up process again with all of my Macs?
Add a comment
|
4 Answers
From Apple Support Knowledge Base...
Time Capsule, Mac OS X v10.6.3 or later: How to transfer your back up from an existing Time Capsule to a new one
For this process, you should leave your computer in the same room as the Time Capsules, or use one Ethernet cable to connect your Mac to the Ethernet port on the existing Time Capsule, then use another Ethernet cable to connect from the existing Time Capsule to the new Time Capsule.
- Configure your Time Capsule for your network. See the documentation that came with your Time Capsule for information about setting it up on your network.
- Open Time Machine preferences in System Preferences.
- Slide the Time Machine switch to Off.
- Open a Finder window.
- Locate both Time Capsules listed in the SHARED section of the navigation pane on the left of the Finder window. Note: If you do not see your Time Capsules in that section, choose Preferences from the Finder menu and make sure "Connected servers" is checked under SHARED.
- Select the name of the new Time Capsule in the navigation pane. The default name is "Time Capsule xxxxxx", with xxxxxx being the last digits of the ID printed on the bottom of the Time Capsule.
- Mount the volume by double-clicking the name of the volume in the Finder window's main section. The default drive name is "Data".
- Open a new Finder window by pressing Command-N, or by choosing File > New Finder Window.
Repeat the previous 2 steps with the other Time Capsule, to mount it. Drag your backup disk image from the current Time Capsule to the new Time Capsule. This can take some time to complete because your entire backup will be copied.
Open Time Machine preferences in System Preferences.
- Click "Select Disk...", then select your new Time Capsule.
- Perform a Time Machine back up.
- After the back up, you can remove the Ethernet cables if desired and configure your wireless network to your liking.
-
This can take a very, very long time - so gigabit ethernet cable is the way to go. This is the most secure / official manner since it's by-the-book– bmike ♦Commented Aug 12, 2011 at 22:02
-
1Finally got my new Time Capsule and made the move last night. It was easy to copy the images over and took about 8 hours to complete (~1TB) on Fast Ethernet (100base-T).– g .Commented Aug 13, 2011 at 11:40
This is a slow way but dead simple. After letting the new time capsule absorb the setting from the old one and hooking it up to your network then just reconnect with Airport Utility to the old one. Reconfigure the old one to extend your network instead of making a new one.
Now you can mount both drives and copy files between then as you wish.
Some time ago I read an article about this procedure but it's a bit of a hack.
I won't copy it here because it's a 12-point tutorial.
Anyway, I was too lazy to test it, so I cannot guaranty it will work.
Maybe someone will post a better solution.
If you can find a way to hook up the TImeCapsule's drive to your mac directly you might get away with this simple Disk Utility trick:
http://rolfje.com/2008/09/07/a-bigger-timemachine-without-changing-history/
-
How can anyone do that without physically breaking the Time Capsule enclosure? (they don't open easily or transparently)– bmike ♦Commented Aug 12, 2011 at 22:00
-
Like I said, "if you can find a way to hook up the TimeCapsule". Maybe there's also a way to do it just by mounting the sparse bundle, but I can't figure that out for you because I don't have a Time Capsule myself. Opening the Time Capsule would probably require a putty knife, like opening the mac mini. It's quite easy to open a mac mini actually.– RolfCommented Aug 18, 2011 at 12:03