2

My hard drive is failing so I put a brand new 500gb hard drive in my MacBook 2008 white 13".

I have a retail disc of Snow Leopard but the install keeps failing over and over again. It hangs at 29 minutes remaining, 28 minutes remaining and fails at 14 minutes remaining with loads of errors in the install log.

My idea was to connect the old hard drive (which has Lion installed) using a USB docking station, boot from that and using the installer on the old hard drive desktop, install Lion straight onto my new internal hard drive.

Would this work and if not how can I get either Lion or Snow Leopard installed on my new internal hard drive?

Improve this question

1 Answer 1

Reset to default
3

Yes - Mac do not care if the boot drive is connected internally or externally.

I usually recommend installing the OS on the new drive with it connected externally since you don't do the swap until after you know the drive boots externally, but the opposite order is fine.

Now, if you have problems, it's going to be because of hardware issue (cable, or drive failure) or possibly the software isn't complete / correct.

Improve this answer
1
  • 1
    Thanks @bmike. I gave it ago anyway and it worked. My hard drive was already in there and I used CCC to clone the old hard drive and copy it to the new internal drive. Good job too as my old drive has loads of errors and was on its way out. All working god now
    – AdRock
    Commented Jan 23, 2014 at 14:01

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .