1

I have a 13" MBP with a mini DP to VGA. I have it hooked up to my new Samsung 23" display that has a max resolution of 1920x1080, but it seems that I can't pick a resolution higher than 1360x768. The adapter is from CablesToGo and states that the max resolution supported is 1920x1200 so I should be fine.
Note: I've tried on 2 MBP's and the resolution is the same on both.

Improve this question

2 Answers 2

Reset to default
0

Turns out a reboot was necessary for it to display correctly. Once that was done all is good in the world again.

NOTE: Was never able to get this to work properly with a VGA adapter - a reboot is always required. The only solution was going to HDMI.

Improve this answer
7
  • 1
    see the green tick beside this question? Tick it and do a part for the community.
    – user6124
    Commented May 28, 2011 at 12:31
  • That's weird. When I plug in my adapter it just works perfectly out of the box with my external monitor (it's only 1680x1050 thought). Also on a 13" MBP.
    – XQYZ
    Commented May 28, 2011 at 18:30
  • for whatever reason this one did not, but it was the first time plugging it into a monitor of that resolution
    – dstarh
    Commented May 31, 2011 at 17:37
  • Taking the answer back. It only works if I reboot while the adapter is plugged in.
    – dstarh
    Commented Jun 2, 2011 at 3:43
  • Is there a long term answer to this question? Why not just edit the answer to include what you've learned. Rather than comment that you take back the answer, you could also just delete a wrong answer.
    – bmike ♦
    Commented Oct 25, 2011 at 12:18
0

Seems like there may be a faulty piece of hardware somewhere.

The Display Port to VGA adapter is a fairly complex adapter including a digital to Analog converter circuit board, it is not just passing copper wires straight thru like older DVI based adapters did, eg Mini-DVI. I would try connecting the adapter to different LCD Monitors and see if it is also providing incorrect maximum resolutions for those displays too. If the answer is yes then contact Cables to Go, and let them know the issue with the adapter.

If no, it might not be a bad idea to test the the Samsung display if you can't find a fault in the adapter. Try connecting the Samsung display to a native VGA source and see if the monitor is working correctly, because the display itself has a analog to digital converter that if malfunctioning could produce erroneous maximum resolutions as well.

Improve this answer
1
  • I ended up buying the hdmi adapter so it became a non issue for me
    – dstarh
    Commented Apr 11, 2012 at 14:29

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .