Note:
-----
The updated steps for installing Windows 8.1 are given [here][1].
**********************************
My hardware and software differs from yours. I will first document how I tested my answer and then try to adapt the answer to your needs. Since this is a fairly long answer, the adaption will be given as a separate answer.
My computer is an iMac (20-inch Mid 2007). The version of OS X is 10.10.5. I will be installing Windows 7 Professional SP1 64 Bit.
I have only one internal drive. It is a 1 TB hard disk using the Apple hybrid GUID partitioning scheme. Hybrid means Windows will see the drive as MBR partitioned, while OS X views the drive as GUID partitioned. I will be following Apple's recommendations and installing Window using the legacy BIOS. **I also have a working internal optical SuperDrive which is not used to install Windows.**
(Hint: For a better view, click on an image or open an image in a new window.)
1. Aquire the Boot Camp Support Software (the drivers). The software
can either be downloaded using the Boot Camp Assistant, downloaded
directly from the Web or copied off a OS X installation DVD. See
[System requirements to install Windows on your Mac via Boot
Camp][2] for details. This procedure does **not** require the use of
a flash drive. *If your Boot Camp Support Software is stored on a
flash drive, then follow the special instructions given in certain
step that follow.*
2. Make sure your firmware is up to date. See [EFI and SMC firmware
updates for Intel-based Macs][3].
3. Download and install a free copy of [VirtualBox][4] from Oracle. I
used VirtualBox, Version 5.0.0 r101573, Copyright © 2015.
4. Inside your "Documents" folder, create a folder named "VirtualBox".
This is where you will keep the files created in the rest of the
steps.
5. Create a MS-DOS (FAT) formatted partition to install Windows. You
can use the Bootcamp Assistant, the Disk Utility, or commands
(`distutil`, `gpt` and/or `fdisk`) entered in a Terminal window.
Other third party tools, such as [`gdisk`][5], can also be used.
Give the label for this partition the name "BOOTCAMP".
6. Determine the disk and partition numbers of the partition named
"BOOTCAMP". To do this, highlight the partition in the Disk Utility
application and click the "Info" button. A popup window should
appear. The values shown will be used in the next step.
[![][6]][6]
The information, in this pop up window, shows the disk and partition
numbers are 0 and 4, respectively. If your numbers are different,
you will need to substitute your numbers in the rest of the steps.
**If your partition number is greater than 4, then you can not install Windows on this partition.** (*Technically, this may not be
true, but it is beyond the scope of this answer to explain how to do
so.*)
[![][7]][7]
Do **not** close the popup window.
7. Open the Terminal application and enter the following commands in
the Terminal window. This will set variables to be used in later
commands. In the next command, replace `α` with the "Disk Number"
shown in the Disk Utility popup window. The usual value for `α` is
`0`.
DISK0=/dev/diskα
In the next command, replace `β` with the "Partition Number" shown
in the Disk Utility popup window. The usual value for `β` is `4`.
PARTITION=β
The next command sets the variable `PARTID` to the disk identifier of
the partition. This should be the same as the "Disk Identifier"
shown in the Disk Utility popup window. The usual value for `PARTID`
is `disk0s4`.
PARTID="$DISK0"s"$PARTITION"
Note: the letter `s` is lower case.
Close the Disk Utility popup window.
8. With the Disk Utility application still open, select "File→New→Blank
Disk Image..." from the menu bar. In the popup window, enter the
values shown below. Note: "Where:" should be the "VirtualBox" folder
created in Step 4. *If the Boot Camp Support Software is stored on a
flash drive, you can use the default "Size:" of "100 MB".*
Save As: bcssoftware
Tags:
Where: VirtualBox
Name: BCSSOFTWARE
Size: Custom... (1.5 GB)
Format: MS-DOS (FAT)
Encryption: none
Partitions: Single partition - Master Boot Record Partition Map
Image Format: read/write disk image
The popup window should appear as shown below.
[![][8]][8]
Click the "Create" button.
9. Determine the disk number of the partition named "BCSSOFTWARE". To
do this, highlight the partition in the Disk Utility application and
click the "Info" button. A popup window should appear. The values
shown will be used in the next step.
[![][9]][9]
The information, in this pop up window, shows the disk number is 1.
If your number is different, you will need to substitute your number
in the rest of the steps.
[![][10]][10]
Do **not** close the popup window.
10. Using the same Terminal window, enter the following to set the
variable `DISK1`. Replace `γ` with the "Disk Number" shown in the
Disk Utility popup window. The usual value for `γ` is `1`.
DISK1=/dev/diskγ
**Quit the Disk Utility.**
11. Copy the Boot Camp Support Software to to the partition labeled
"BCSSOFTWARE". I used the Finder application to do this. *You can
skip this step, if this software is already stored on a flash
drive.*
12. Mark your partition as active in the MBR by entering the following
in the same Terminal window. The input for the interactive command
`fdisk` is taken from the variable `INPUT`. If a password is asked
for, enter it.
INPUT=$(printf "f $PARTITION\nw\ny\nq")
sudo fdisk -e $DISK0 <<<"$INPUT"
Note: To display the value for the variable `INPUT`, use the
command `echo "$INPUT"`.
13. Allow VirtualBox read/write access to your physical partition by
entering the following commands in the same Terminal window. If a
password is asked for, enter it.
diskutil unmount $PARTID
sudo chmod go+rw $PARTID
This will allow VirtualBox to install Windows on your physical
partition. **Note: This access will only last until OS X is
rebooted.**
14. Create the files that map the virtual partition and disk to the
physical partition and disk image. In the same Terminal window,
enter the following commands. If a password is asked for, enter it.
cd ~/documents/virtualbox
sudo vboxmanage internalcommands createrawvmdk -filename $PWD/bootcamp.vmdk -rawdisk $DISK0 -partitions $PARTITION
sudo chown $USER bootcamp*.vmdk
diskutil unmountDisk $DISK1
vboxmanage internalcommands createrawvmdk -filename $PWD/bcssoftware.vmdk -rawdisk $DISK1
15. Open the VirtualBox application and click on icon above the New
label. Enter or select the values shown below, then click the
"Continue" button.
[![][11]][11]
Use the default settings except for the hard drive. Choose the
"Use an existing virtual hard drive file" button. Navigate to the
VirtualBox folder created in step 4. Open the "bootcamp.vmdk"
file. Your window should appear similar to what is shown below.
[![][12]][12]
Click the "Create" button.
16. Enter the following command in the same Terminal window.
diskutil unmountDisk $DISK1
Return to the VirtualBox application's "Oracle VM Virtual Manager"
window and click on the icon above the "Settings" label. Next,
click on the icon above the "Storage" label. Right click on
"Controller: SATA" and select "Add Hard Disk". Choose existing disk
by opening the file "bcssoftware.vmdk" stored in the folder created
in step 4. The attachment "bcssoftware.vmdk" should appear as shown
below.
[![][13]][13]
17. Highlight the Empty CD/DVD and select "Choose a virtual CD/DVD
file..." to attach your Windows installation iso file. (Hint: Look
for the CD/DVD icons)
[![][14]][14]
Click OK to close the window. Your "Oracle VM Virtual Manager"
window should appear similar to what is shown below.
[![][15]][15]
18. Before clicking the icon above the "Start" label to begin installing
Windows, enter the following command in the same Terminal window.
diskutil unmountDisk $DISK1
19. When you reach the window shown below, select "Custom (advanced)".
[![][16]][16]
In the next window, click on "Drive options (advanced)".
[![][17]][17]
Select the "BOOTCAMP" partition and click on "Format". The error
message shown below will disappear. Click on "Next" to continue
installation.
[![][18]][18]
20. The rest the virtual machine installation will be repeated again
after booting Windows on the physical machine. Use the provided
answers when the following windows first appear. When asked a
second time, you can provide your own answers.
When the following window first appears, I would enter the Product
Key and uncheck the "Automatically active Windows when I'm online"
box.
[![][19]][19]
To be safe, I would not let any updates download or install until
after the Boot Camp Support Software (the drivers) is installed.
Therefore, I would click on "Ask me later" in the window shown
below.
[![][20]][20]
VirtualBox creates a virtual Public network for your virtual
machine. Therefore I would click on "Public network" in the window
shown below.
[![][21]][21]
21. Once the installation has completed on the virtual machine, you
need complete the following instructions to make a copy the MBR
bootstrap code. From the Start Menu, select "Computer" to open a
window containing the hard disk drives and devices with removable
storage. Determine the drive letters for the hard disk drive
labeled "BCSSOFTWARE" and the CD (optical) drive. The image below
shows the drive letters on my computer are `D:` and `G:`,
respectively. Your drive letters may differ from mine.
[![][22]][22]
Close the window and open a Command Prompt window run as an
administrator. Select "Start Menu→All Programs→Accessories",
then right click on "Command Prompt" and select "Run as
administrator", as shown in the image below.
[![][23]][23]
In the Command Prompt window, enter the command shown below. If
necessary, substitute your drive letters for `G:` and `D:`.
G:\BOOT\BOOTSECT /NT60 D: /MBR
The results of running this command on my computer are shown below.
[![][24]][24]
Close the Command Prompt window.
22. Copy the Boot Camp Support Software from the partition labeled
"BCSSOFTWARE" to the "C:\Users\Public\Public Documents" folder. I
used the Windows Explorer to do this. *You can skip this step, if
this software is already stored on a flash drive.*
23. You need to prepare Windows to run on your physical Mac. Open the
Windows Explorer and navigate to the "C:\Windows\System32\sysprep"
folder. Open the "sysprep" application. Select "Enter System
Out-of-Box Experience (OOBE)", "Generalize" and "Shutdown" as shown
below. Click OK and wait for the virtual machine to shutdown.
[![][25]][25]
24. Once the virtual machine has shutdown, quit VirtualBox. Enter the
following in the same Terminal window. These commands will update
the MBR bootstrap code, set the Windows partition identifier to 7
in the MBR and then mount the partition. The input for the
interactive command `fdisk` is taken from the variable `INPUT`. If
a password is asked for, enter it.
sudo fdisk -u -y -f $DISK1 $DISK0
INPUT=$(printf "s $PARTITION\n7\nw\ny\nq")
sudo fdisk -e $DISK0 <<<"$INPUT"
diskutil mount $PARTID
25. Close all other applications. Open System Preferences and select
"Startup Disk". Highlight the "Untitled Windows" icon and click the
"Restart" button.
[![][26]][26]
If something goes wrong, you will need to hold down the "option" key
at startup to return to OS X. Hopefully, nothing will go wrong and
Windows will start.
26. When Windows finishing installing, install the Boot Camp Support
Software (the drivers). This software is either in the
"C:\Users\Public\Public Documents" folder, or on a flash drive.
COMMENTS
--------
I ended up having to create two user accounts. If you only want one account, you have two options. First, delete one of the accounts. Second, disable one of the accounts so it will not appear. The former can be accomplished from the Control Panel, the latter requires entering the command `control userpasswords2` in a Command Prompt window. For example, below is the window were one can enable or disable the rpj account. If you need help let me know.
[![][27]][27]
[1]: http://apple.stackexchange.com/questions/189335/any-solution-to-bootcamp-windows-8-1-with-macbook-pro-15-2010/189398#189398
[2]: https://support.apple.com/en-us/HT204048
[3]: https://support.apple.com/en-us/HT201518
[4]: https://www.virtualbox.org
[5]: http://www.rodsbooks.com/gdisk/
[6]: https://i.sstatic.net/EC8ZW.png
[7]: https://i.sstatic.net/k02eZ.png
[8]: https://i.sstatic.net/XnPPJ.png
[9]: https://i.sstatic.net/1664a.png
[10]: https://i.sstatic.net/ZgAPn.png
[11]: https://i.sstatic.net/wPeZx.png
[12]: https://i.sstatic.net/d0fG9.png
[13]: https://i.sstatic.net/fs6L2.png
[14]: https://i.sstatic.net/2oLSl.png
[15]: https://i.sstatic.net/GWEmM.png
[16]: https://i.sstatic.net/ikXcW.png
[17]: https://i.sstatic.net/oIZOC.png
[18]: https://i.sstatic.net/dKeEf.png
[19]: https://i.sstatic.net/Z6Dlv.png
[20]: https://i.sstatic.net/P6vHe.png
[21]: https://i.sstatic.net/bEllj.png
[22]: https://i.sstatic.net/NjzFH.png
[23]: https://i.sstatic.net/6LAqy.jpg
[24]: https://i.sstatic.net/7PPoU.jpg
[25]: https://i.sstatic.net/m2HXN.png
[26]: https://i.sstatic.net/4732N.png
[27]: https://i.sstatic.net/Q0O2O.png