Questions tagged [raid]

Redundant Array of Independent Disks, a scheme to utilize multiple hard drives to increase speed and reliability or to provide for data recovery in the event of hard drive failure

Filter by
Sorted by
Tagged with
0
votes
1answer
361 views

Expanding Flash Storage with SDXC

I see on a Macbook Pro, you can expand your current storage space with SDHC or SDXC. Being a Linux user I know you can use RAID to expand storage with 2 disk, so storage looks like 1 HD. However, most ...
1
vote
2answers
1k views

Simple Low-Cost Network Backup System - Drobo? Alternatives?

I'm hoping to graduate from manually copying important files to multiple external desk or portable drives; affordably. We have 3 Macs and an iPad or two. I have just now learned about Drobo, who as I ...
0
votes
1answer
76 views

Continuous volume shows too much available space

I have a continuous volume of two identical SSD drives. 2 terabytes, 1.92 terabytes in practice. I plugged it in via USB today and finder and disk utility show that all the space is available. 1.92TB....
1
vote
1answer
355 views

Backing up a RAID experiencing I/O issues

I recently began working for a company that has an OS X Server with a PROMISE Pegasus Thunderbolt RAID (RAID 5) attached as a file server. Within my first couple of days, it became apparent that users ...
2
votes
1answer
1k views

VMware ESXi compatible RAID card for the Mac Pro

I have a 2009 Mac Pro that I'd like to add a hardware RAID card to. I am running VMware ESXi with various OSes running as VMs. The Apple RAID card is not what I'm looking for. I would also like to ...
1
vote
1answer
6k views

How Do I Partition A Raid 0 Using Disk Utility?

I have just purchased a WD My Passport Pro. It comes in a striped RAID 0 configuration comprising of two 2TB drives. I want to partition the drive into 3: Photoshop Cache Lightroom Catalogue Video ...
0
votes
1answer
460 views

Are there any Hardware RAID Cards with Batteries that will work in a Mac Pro 3,1?

I'm looking to install Proxmox on my MacPro3,1 and it's suggested that if you plan to use the system for 5 years that you install a Hardware RAID card with a battery in it, so that if the power goes ...
0
votes
1answer
305 views

Restore a lost partition from degraded software mirror RAID

I used to store my valuable files on Apple software RAID (mirror). Recently one disk has failed and the mirror became degraded. I rebuilt the mirror using new drive, following this guide, but seems ...
3
votes
2answers
501 views

Apple Time Machine, Drobo and studio computer [closed]

I bought an Apple Time Machine. I have a home studio with several hard drives. I'm trying to find the best way to setup Time Machine to keep all my storage backed up all the time. Studio Computer (...
1
vote
1answer
421 views

Combining two RAIDs

I have an OSX machine which houses 2 RAIDs made of 6 disks. The 2 RAIDs contain 6TB of data; they were set up with Disk Utility: A 'safe' 4TB RAID-1 (mirror) made of 2 x 4TB disks, 3.68TB used A '...
1
vote
1answer
166 views

Need solution for RAID from old Mac

I have an old Hackintosh which I no longer use, except as a server to access 2 RAIDs made of 6 disks. The machine is too big, uses too much power, makes too much noise, and generates too much heat to ...
0
votes
1answer
954 views

Is it possible to restore a backup from a single disk on RAID1?

I want to setup a Mac Mini Server with the following configuration. The Mac Mini server has 2*1TB HDDs. I want to do the following: Setup the server Create a backup of the system on an external ...
1
vote
1answer
68 views

Will the Mac Mini late-2012 try to reformat dual PC raid discs when I plug them in?

I have a new Mac Mini late 2012 model replacing a PC with dual 2 TB hard drives set up in Raid format mirrored and auto save. I want to put them into a caddy, a Startech 4-bay SATA version with a ...
2
votes
2answers
2k views

How can I mirror two macbooks [duplicate]

I have two macbooks. I want them to be exact copies. They have different CPUs, RAM, but they have the exact same drives. I work on both of them. I never work on them simultaneously. Can I setup ...
0
votes
1answer
51 views

Manually force sync on AppleRAID 1

I'd like to force a sync or repair on my AppleRAID set as part of a regular maintence. Under Linux (md) I can do this by writing to control devices. Diskutil does not seem to offer me such an option.
0
votes
1answer
93 views

Raid 0 - Why am I constantly losing data?

I have a Mediasonic 4 bay drive enclosure like this with four 3TB Toshiba HDD's attached to my hackintosh machine. The drives are in a RAID 0 configuration setup with Disk Utility. I've had this ...
0
votes
1answer
512 views

RAID 0 On 21.5" iMac Late-2012

I am about to get my fusion drive upgraded to a 256gb SSD on my Late-2012 21.5" iMac that I got from work (don't worry I have a company upgrading it, and yes they know its a Late-2012 iMac). When ...
3
votes
0answers
426 views

Raid two external hard-drives with read/write support on Windows & OS X

I have a USB 3 HDD enclosure that currently has two 1TB drives in it. I am looking at buying another external USB 3 HDD drive (not an enclosure). I am currently running the external enclosure with the ...
1
vote
1answer
86 views

How does Time Machine make room for new users?

This is more of a hypothetical question, but we've been using a Time Capsule to back up our Macs, and it has steadily been filling up since the year or so that we've had it. We've since brought a few ...
1
vote
1answer
128 views

Can one slice of a “Disk Utility” RAID mirror be moved to a new computer?

With a 2-disk RAID mirror created in Disk Utility, after one disk fails, can the remaining good disk be moved to a different Mac and used successfully?
1
vote
2answers
188 views

RAID 0 and 1 combo?

If I understand correctly, RAID 1 is two drive that mirror each other, and if one fails, it can be replaced and some hours later, it's a mirror of the good drive. Raid 0 combines 2 drives in a way ...
0
votes
1answer
592 views

Something like MHDDFS for OS X?

I'm trying to have my Mac Mini take over all my server's functions (I'm recycling the server hardware into a Linux workstation). Its pretty much all done, except for the file-serving portions. ...
0
votes
0answers
272 views

Repurpose 2006 Mac Mini for Time Machine with external HDD

I have a Apple Mac mini "Core Duo" 1.66 from 2006 sitting around. I also have on order a CiT 3.5 inch USB 2.0 Dual SATA HDD Enclosure and was thinking of getting a WD Green 4TB Desktop Internal SATA ...
0
votes
1answer
408 views

How to use iostat with AppleRAID volume?

When I try iostat disk5, I get the error: iostat: could not record 'disk5' for monitoring Iostat works with my other drives, and with the individual disks which make up the RAID volume. How can I ...
0
votes
1answer
527 views

Cannot boot Mac Mini with striped RAID 0 set

Today we could not get one of our machines running with 10.9 and RAID 0 which stripes the data on the boot volume. After several hours of doing the 'standard' tasks like fixing permissions etc, we've ...
1
vote
1answer
370 views

Can I run two non-thunderbolt displays from a thunderbolt RAID device?

It seems like this question has been asked a million times, but after a few hours of reading similar questions, I have not been able to find a clear answer. I have a mid-2012 Macbook Air running OS X ...
3
votes
2answers
385 views

Setting Up Raid iMac

I have one lacie 2big thunderbolt 4th unit setup as raid 1. I want to add a lacie 2big thunderbolt 4th unit. How do I get it set up so the entire unit 1 is mirrored onto unit 2(Raid1)?
1
vote
1answer
782 views

Recoverability with HFS Plus following removal of a disk from RAID 0 hardware or software

A theoretical question (I do not have spare hardware to test for this). Scenarios If RAID 0 is used (no redundancy of data) with HFS Plus, and if a disk within the array is disconnected for a while ...
2
votes
1answer
353 views

Should I use raid 0 with my optibay drive?

I installed a 120gb SSD today. My optibay currently holds my MBP stock drive (5400 RPM HD 320GB). Since they have different memory sizes, should I put them in raid 0? The only reason why I want raid 0 ...
1
vote
1answer
259 views

Could two WD Passport Ultra 1TB drives be used in the OWC Mercury Elite Pro Dual mini enclosure as RAID 1?

I'm thinking of buying one more WD Passport Ultra 1TB (I have one already) so that in the near future I could disassemble the two Passports and install the 1TB drives into the OWC Mercury Elite Pro ...
3
votes
2answers
1k views

Make SCSI Appear as Internal Hard Drive

I have the HighPoint RocketRAID 2720SGL Raid card running on my Mac and it shows as an external drive. I would like to make it appear as an internal drive. Is this possible? From: To: Here is ...
0
votes
1answer
402 views

OS X software RAID 0 with 6x SATA SSD?

I will be able to use a former video editing "Mac Pro" :) for a bit, free to configure anything I want in software. I would like to experiment with setting up OS X software RAID 0 with 6x SATA SSD. ...
1
vote
1answer
1k views

RAID 1 with a Mac - how to avoid formatting one of the drives

I have an iMac with an external 2TB HDD. I recently bought a second 2TB HDD in order to build a RAID 1 (mirrored) with the two drives. The problem is that Disk Utility forces me to create a new RAID ...
1
vote
1answer
2k views

Safely destroying Apple Software RAID 1

If an Apple Software RAID (RAID 1, mirrored) exists and one of its members is failed. It is possible to destroy the RAID and keep the data on the functional disk intact? If so, how is this ...
0
votes
1answer
692 views

Merge two disks to RAID 0 and keep my installation

I've got two 128Gb SSDs installed in my MacBook Pro. Originally I had one for the system (named Calcium), and one for the /Users folder, symlinked into the first (named Users). As I ran out of space ...
1
vote
1answer
2k views

Use two external hard drive docks to retrieve data from RAID 0 disks

Some while ago, I fried the power supply inside of my WD MyBook Pro Edition II, leaving the disks intact but rendering the enclosure itself totally useless. So now I have two 500GB 3.5" SATA drives, ...
0
votes
1answer
229 views

Lacie Big 5 10tb to be used as external hard drive but want security so: ZFS Raidz?

I've just bought the Lacie Big 5 10th and I want to use it as an external hard drive for my files. I was thinking of making it raid1 but then I heard about ZFS and Raidz. so that I can easily change/...
0
votes
1answer
349 views

Apple Software RAID: Add disk to array online

I recently purchased a WD Thunderbolt Duo, which has two 4 TB drive, now running in RAID 0 with Apple Software RAID. My question is simple, if I am to get another Thunderbolt Duo next year, is it ...
2
votes
2answers
1k views

When creating a RAID 1 mirror set, do you need to have both disks available or can one be added later?

I'm planning my transition to Mac OS and I have a pair of mirrored drives I would like to move to my future computer. Since they are currently formatted as NTFS they will need to be reformatted during ...
0
votes
1answer
2k views

Can a file be copied to one hard drive in a RAID 1 mirror set (software RAID), and later have the 2 drives sync up?

I think I read that we can set up a RAID 1 mirror set (software RAID) using OS X Mountain Lion using Disk Utilities, and later plug in one drive and copy a file to that drive, and later on, plug both ...
1
vote
1answer
104 views

OSX partitions wiped by NAS RAID

So I messed up when I thought it would be a good idea to stick some hard drives into my NAS. It's now changed the partition table to a RAID0 one and my data has vanished. What are my best chances of ...
1
vote
1answer
575 views

RAID 1 with Two LaCie 5Big Thunderbolt

I'm looking at getting a LaCie 5Big Thunderbolt unit for archiving purposes. I would like to get a second one and use Disk Utility to create a Mirrored RAID Set from both of them so that I have a ...
7
votes
3answers
16k views

Replace a failed disk in a Disk Utility RAID 1

I have LaCie 2big thunderbolt 2-disk device configured as a RAID1 from Disk Utility. One of the drives appears as "failed", so I unmounted the raid, replaced the drive and plugged it all back in. Now ...
5
votes
1answer
2k views

Can I Mount a Hard Drive in Mac Pro Tower as Read Only?

I'm trying to recover data from a failed external Fantom RAID Drive enclosure by plugging the drives into a Mac Pro tower, but I'm concerned that OS X might write to the disks and jeopardize the RAID ...
1
vote
1answer
54 views

RAID system with external hardrives

I have a few external ssd hardrives (My Passport, in my case). I would like to integrate them within a system that provides reliability in case of failure, by producing redundant information across ...
3
votes
1answer
8k views

Which SSD Thunderbolt Product For Main Boot Drive for my iMac?

So I have a 2012 iMac. I got the base model 21.5" which means I have a painfully slow 5400 RPM hard drive. The pure SSD option would have cost $1,300 ($1 more than the $1,299 base price) if I could ...
17
votes
2answers
10k views

Why doesn't FileVault work on a RAID volume?

At work, I said to my colleague that it was not possible to enable Filevault on a RAID volume. He was surprised and asked me the technical reason. So I would like to know. It's strange because ...
0
votes
1answer
230 views

RAID questions with ML

I'm looking to build a NAS box and putting ML on it. I currently have two drives that are configured as RAID one that I am pulling out of a NAS box. I have one drive that I'd like to add to the two ...
1
vote
1answer
421 views

How can I reconfigure the RAID settings on a Maxtor OneTouch III?

I have a 1TB Maxtor OneTouch III. This is the drive that comes with two 500GB disks and software to configure RAID 0 (mirroring) with 500GB of storage, or full use of both disks for 1TB of storage. ...
0
votes
1answer
573 views

Break RAID0 to have separate drives

I have an enclosure Hornettek Dual Bay SATA Case with removable disk trays, and RAID0, RAID1. USB3.0 and eSATA dual bay case with two 2T WD drives. My idea was to set them up as separate drives to ...