Here, it says how to use the audio jack as in input. On my MacBook Pro 13" (mid 2012), It doesn't seem to have the option in settings. Is it not possible with these computers?
Ask Different is a question and answer site for power users of Apple hardware and software. It only takes a minute to sign up.Sign up to join this community
All PowerBook and MacBook models support analog audio in via the headphone jack.
In your specific case, it is possible to use external microphone on MacBook pro and Air 2012 Models.
It looks like Apple has redesigned it to be a multifunction plug, without telling us in plain English. What they do say is you can use the Apple iPhone headset with microphone! Now that is a Hint !
Since there are multiple options to connect a microphone lets take a look.
1 - For stand alone microphone with cable you could use a USB connector type or Audio to USB converter.
2- You could use a BlueTooth type microphone/Headset.
3 - And last not least, you could actually use your Headphone (as marked) the 1/8 inch plug, but NOT with standard audio plug.
Here is the how: The plug is like the headphone port on iOS devices, this jack supports audio input as well as output—with as described in Apple specification.
Looking under the hood of Apple "About this Mac" you get the answer (it says it does support it).
The microphone or headset in question must be of the three-ring variety, just like Apple’s headsets. The fourth pin (ring) is for the microphone !
OK, what now? Lets assume you insist on using your microphone!!!
Get the 3.5mm 4 Position to 2x 3 Position 3.5mm Headset Splitter Adapter - M/F
... this headset splitter adapter breaks the audio port out into two distinct ports - one that can be used for a microphone input connection, and the other for connecting external (output) speakers.
I found stores in Europe (for about €10), but sure you can find it where you are.
I post my solution hoping it can help someone.
I've have a MBP mid-12 13in, with the so-problematic unique audio jack. I'me sure that external&internal usage is possible because of the iphone headset test.
So I bought the TRRS cable, and my first tests fails: I got an external audio detected, but no luck with the internal line.
Then, I found an amazon comment about the cable, solved:
When I trying it fails again. But I've found the trick:
The Griffin iMic is probably the most commonly touted solution for this "new" problem. This way you can monitor through the headphone jack, and the USB headphone jack also....I would assume. Maybe it's one or the other, however.
Either way the digital solution may improve signal quality also. There are other cheaper versions of the iMic but it seems Griffin was like "Hey Apple, want to make a computer that's missing stuff so we can make some more money?"
If the link breaks just look up griffin iMic. It appears B&H currently sells it for $23.78
I've also seen similar products via https://www.google.com/#q=usb+to+3.5mm
I hope this helps with the "no line-in" problem on the 13" MacBooks and the new 27" iMacs. As well as the "My line-in doesn't recognize my mic" problem.
Alternatively try that 3.5mm 4 Position to 2x 3 Position 3.5mm Headset Splitter Adapter - M/F that Buscar mentioned above.
You can connect an external mic only if it has 4 pins on the 3.5mm jack. The MBP Mid 2012 takes some time to recognise the mic so just wait a little bit. You should see 'external mic' appear in System Preferences>Sound>Input If your jack does not have 4 pins, i think that you can use a 3.5mm female to 3.5mm male 4 pins converter... But the 4 pins are very important to make it work. Hope it helps
Yes, it seems the option is missing from your settings: this is what that preference panel looks like on my machine (13-inch, Mid 2009) (with nothing plugged into the audio port):
Unfortunately it looks like audio input isn't implemented on your model :(
The tech specs for MacBook Pro (13-inch and 15-inch, Mid 2012) have the following for the 13-inch:
- Headphone port
- Support for Apple iPhone headset with remote and microphone
- Support for audio line out (digital/analog)
... it doesn't mention audio line in (which it does for the 15-inch).
Sorry for the bad news. One workaround is to buy an audio input device which plugs into USB.
MY COMPUTER SETUP
My mid-2012 MacBook Pro ("MBP") does NOT have a port labeled for microphone, but it DOES have a 3.5mm (1/8") port labeled with a Headphone (not headset) icon.
When I plug a microphone's 3.5mm TSR plug (TWO black stripes alternating with THREE shiny metal bands) into that headphone port, the MBP does not recognize or receive the microphone's signal/audio.
BUT, when I plug in a headset (combined speaker and microphone) that has a 3.5mm male TSSR plug (THREE black stripes alternating with FOUR shiny metal bands), the MBP DOES recognize and receive the microphone's signal/audio.
I have ordered a splitter (analog, known as "auxiliary" and "audio" splitter), that has one 3.5mm male TSSR plug on one end, and 2 female 3.5 female ports (unknown if TSR or TSSR) on the other end. Supposedly, one female port will provide microphone input, and the other female port will provide headphone/speaker output. From everything I've read and researched, I'm pretty sure this will be what's needed to get microphone in and audio out from the one "headphone" labeled 3.5mm port on the MBP.
I'll try to remember to come back here to update once we get that splitter (http://www.dukabel.com/product_D1M2FFL30.php), to let you know if it works :-)
Also, in the meantime, we are achieving microphone input into the MBP using an old Griffin "iMic" USB microphone adapter. Griffin doesn't make it anymore (due to incompatibilities with new 64-bit computers, they told me on the phone a couple days ago), but it works great for the mid-2012 MBP we have right now :-)