I recently got a new monitor Viewsonic VP3268-4K. The monitor installs itself as a sound output device (see picture 'VP3268-4K'). Now I don't want this as it constantly defaults to this sound as opposed to my DAC. How can I remove drivers/sound output device so it is not visible as an option? Few things I have already tried

  1. Checked /library/audio/hal - nothing to delete here
  2. Checked the monitor for any options to disable the speakers and broadcaster as a sound output device. Nothing. All I can do is mute.

I am on Mojave. Any help or guidance much appreciated. Thanks.

enter image description here


1 Answer 1


The problem here is that HDMI carries audio. Period. When you plug in your monitor to your Mac via HDMI it's going to detect that there's an audio device attached. And, like you said, all you can do is mute, but mute has no effect because it doesn't remove the (audio) device; it just lowers the volume to zero.

The second problem is macOS. It assumes that whatever the latest audio device you plug in is the one you want to use. FreeBSD allows me to enumerate my audio devices then using /etc/sysctl.conf tell it which one I want as my default. macOS has no provision for this.

(This is one of the things that drives me nuts about macOS - it assumes I did one thing, so I must want this other thing to happen. It's like an Apple engineer resurrected Clippy from a bit bucket somewhere). <\rant>

There are two ways to attack this:

  • Don't use HDMI. The specifications page for your monitor state that it has mDP (mini DisplayPort), HDMI, and DisplayPort inputs. Use either of the DisplayPort inputs instead (you'll get better performance and reliability anyway). I've found that most monitors don't carry the audio even though DP has the ability to do so. I'm guessing monitor manufacturers assume you want to use it as a computer display.

  • Use an HDMI audio extractor/de-enabler. This will allow you to intercept the audio signals in your HDMI cable and "remove" them for redirection elsewhere (i.e. SPDIF port on a home theater). If the end device doesn't present as an audio device as HDMI, there won't be anything to switch two.

Personally, I would go with the first option. It's the easiest and least complex way to achieve this - it's just a cable.

  • Thanks so much. Never thought HDMI also include audio. Makes sense. Changing the display option looks like a cleaner solution. Thanks for taking time and sharing your insights.
    – rmjeeves
    Jul 5, 2020 at 5:37
  • I think just the second option is feasible for people that have an HDMI only monitor. Also my mac doesn't have any HDMI port; just USB-C where I attach the HDMI adapter (that is original; but it shown to be pretty bad as a replica, often short circuiting or making the audio disappear every few minutes </rant>); so maybe the adapter does additional conversions and might be the culprit for this switching. – In my case, after connecting the monitor the audio switches to it (silent) but then the previously selected device is restored; of course that's pretty annoying, when listening to music. Jul 13, 2020 at 12:45
  • Actually, that port (USB-C) whether just USB or Thunderbolt is sending a DisplayPort signal. The adapter you get is critical because the signals are very different. I always recommend getting an active adapter to avoid issues like the ones you describe.
    – Allan
    Jul 13, 2020 at 12:51

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .