7

I know the first thing to do is dry with a towel the majority of the fluid. Next is to turn off the computer. Then flip over the laptop itself and whilst upside down cool dry the keyboard with a hairdryer for a few minutes. Also leave the computer upside down for a day or so. Is there anything I’m missing?

  • 2
    Huh? Why would turning off the computer not be the very FIRST thing you do? – user91988 Jun 1 at 20:33
18

I'm writing this answer in the hopes to dispel the myths surrounding liquid damage repair. Putting the device in a bag of rice, in the oven, in the sunlight, next to a radiator, heater vent, use a blow dryer, etc. are all nonsense "fixes" that gives you a false sense of security. You can actually do more damage after drying things out and powering things on following these internet fixes.

No. Do NONE of this.

The only exception is to turn it off, immediately.

  • Do not use a towel to "wipe" it up as you're going to spread and "push" liquid deeper into cracks and crevices. Put it on a towel and pat it dry with (preferably) paper towels.

  • Do not turn it upside down as gravity will pull that liquid across unaffected areas of the machine

  • Do not put it in rice or some other desiccant hoping that it will somehow fix the problem. Rice can't fix anything but hunger pangs.

  • Do not put it next to a radiator, in the sunlight, or use a hair dryer. Once you evaporate the liquid, whether by heating or just though the natural evaporation process, contaminants are still left over.

Why?

It needs to be cleaned.

A simple water spill isn't so simple. The impurities in water are what makes water electrically conductive. Pure (distilled) water cannot conduct electricity so it actually cannot harm your computer. The problem is water has salts and contaminants and it's this that causes damage to your Mac.

Removing all power and getting it to a competent technician within hours of the spill - not days is the only sure fire way to protect and contain liquid damage. Any other action rolls the dice and can allow capillary action to let liquid seep to every crack, crevice and corner of the device and cause corrosion and short circuits since the battery is still powering parts of the machine when off.

This also is a safety issue if the water gets into the charged battery.

Beverages of different sorts can wreak havoc, salts (metals) are conductive so thing can short out. There can be acids (juice) or bases (milk) that can cause corrosion. Corroded circuits can actually destroy components and the traces embedded within the PCB. For a refresher, take a look at the Mythbusters episode "Salsa Escape" and see what running a small current through the acidic salsa mixture can do to steel. Now apply that to the tiny "width of a hair" copper traces on a PCB.

Corrosion on a PCB

How to clean a liquid damaged MacBook

If you don't have the technical skills, don't do this! Take it in for service.

This needs to be professionally cleaned with an ultrasonic cleaner and electrical solvent. This requires the logic board to removed, cleaned in the solvent and rinsed in 90% isopropyl alcohol (not the 70% stuff as there's too much water content). Then it needs to be dried and subsequently tested.

Can you use cotton swabs and isopropyl alcohol? Possibly, but it's not reliable. You'll have better results cleaning the case with this method than you will the PCB or electronic components. Using alcohol or electrical solvent with a soft nylon bristle brush (toothbrush) will be much better. You still will want to wash it completely with alcohol and dry with compressed air.

Now, while this will help with the logic board, liquid that happened to get into and in between components (i.e. the glass panes in a track pad) and subsequently evaporated will leave behind whatever residue was in the liquid. This may cause the component to become inoperable. The part might need to be individually cleaned or replaced.

TL;DR

  1. Stay calm. I know you've just watched your $3,000 baby get a shower from a $6 Starbucks Frap-a-something-chino, but a clear head will help you by not making the problem worse.

  2. Turn off the machine. No power, nothing to short circuit.

  3. Using lots of paper towels, attempt to absorb as much as the liquid as you can. Don't wipe; pat or blot; wiping can "push" the liquid making things worse.

  4. Take it for service right away - time is a factor here. Give the tech full details. He/she has seen it all and there's no reason to be embarrassed - the more info they have, the better they can get right to the problem and rescue your Mac with a high degree of success.

| improve this answer | |
-6

microelectronics are very delicate and it is the duty of every owner to protected this delicate devices water is a very serious chock to every components because it electrocutes. the whole board instantly and the damage is not fixable...when owners of lap tops are careless they kill the motherboards instantly..the flow of signals is very acurate and when water touches this flow of signals it fries, the system,,forever death.. right away no magician can fix this delicates super boards..!! is like being hit with high voltage. of water..

| improve this answer | |
  • Welcome to AskDifferent! It's not totally clear what your recommendation to the OP is regarding how to handle a spilling incident. Can you please edit your answer to make this more clear? – nohillside Jun 1 at 13:10
  • I do not like this down vote pile on at all! Yes, there are issues with the answer, but as he is a new user it would be beneficial to assist Mario in crafting a better answer. There are 6 down votes and only a single comment providing feedback with no helpful flags being raised on that comment. – Allan Jun 2 at 0:03
  • Mario, while what you say is technically accurate, it doesn't address the question being asked. Can you expand on what a user should do when something like a liquid spill happens? – Allan Jun 2 at 0:05

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .