It looks like your Fusion Drive got split. Apple has some instructions here explaining how to fix it. I have copied the instructions here, but they made be easier to read and more up to date at the link above.
The fix will permanently delete all data on these drives, so make sure you have a good backup before you proceed!
In your case, you may want to get to a newer version of macOS Recovery as Mojave and above have a single, simple command to fix this issue.
To boot to the newest version of macOS recovery that your system can run, do the following:
- Shut down your computer.
- Hold down Option + Command + R to
boot into the most up-to-date version of macOS Recovery online. This
will likely be the Mojave or Catalina version of macOS Recovery.
If you booted to Mojave or Catalina recovery, here's what Apple says to do next:
- When you see the macOS Utilities window, choose Utilities > Terminal
from the menu bar.
- Type
diskutil resetFusion in the Terminal window, then press Return.
- Type
Yes (with a capital Y) when prompted, then press Return.
- When Terminal indicates that the operation was successful, quit
Terminal to return to the macOS Utilities window.
- Choose Reinstall macOS, then follow the onscreen instructions to
reinstall the Mac operating system. Your Mac restarts from your
Fusion Drive when done.
Alternatively, if this fails, or if you are on High Sierra recovery or earlier, you can follow the High Sierra and earlier set of instructions which are a bit more complex.
- Turn on your Mac, then immediately press and hold Command-R to start up from macOS Recovery. Release the keys you see the Apple logo
or spinning globe.
- When you see the macOS Utilities window, choose Utilities > Terminal from the menu bar.
- Type
diskutil list in the Terminal window, then press Return.
- Terminal displays a table of data about your drives. In the IDENTIFIER column, find the identifier for each of the two internal,
physical drives that make up your Fusion Drive. Usually the
identifiers are disk0 and disk1. One of them should be 128GB or less
in size. The other at least 1TB in size.
- Type the following command, replacing identifier1 and identifier2 with the identifiers you found in the previous step. Then press Return.
diskutil cs create Macintosh\ HD identifier1 identifier2
Example: diskutil cs create Macintosh\ HD disk0 disk1
If you get a disk unmounting error, enter diskutil unmountDisk identifier, using the first identifier you gathered previously. Then
enter same command again using the second identifer.
- Type
diskutil cs list, then press Return.
- Terminal displays additional data about your drives (volumes). Find the string of numbers that appears after ”Logical Volume Group”
for the volume named Macintosh HD. It's a number like
8354AFC3-BF97-4589-A407-25453FD2815A.
Example:
+-- Logical Volume Group 8354AFC3-BF97-4589-A407-25453FD2815A | ========================================================= | Name: Macintosh HD
Type the following command, replacing logicalvolumegroup with the
number you found in the previous step. Then press Return.
diskutil cs createVolume logicalvolumegroup jhfs+ Macintosh\ HD 100%
Example: diskutil cs createVolume 8354AFC3-BF97-4589-A407-25453FD2815A
jhfs+ Macintosh\ HD 100%
- When Terminal indicates that the operation was successful, quit Terminal to return to the macOS Utilities window.
- Choose Reinstall macOS, then follow the onscreen instructions to reinstall the Mac operating system. Your Mac restarts from your Fusion
Drive when done.
