61

When I pair my bluetooth headphones (Bose QC 35) to my MBP running macOS Mojave, they sometimes disconnect a few seconds later. I try turning them off and on again, turning off bluetooth on my phone (in case it's competing for a connection or something), but none of that helps. The only solution I've found is to restart my computer which is really not ideal.

Ideally I'd like to find the cause of this, but it would also be really helpful to find a workaround. For example, is there some kind of driver I could try restarting without having restart my whole computer?

Improve this question
6
  • 1
    Just a friendly reminder - if you have an answer or a troubleshooting step - make that an answer please. Comments are for clarifying the question and not for floating potential answers or actual answers.
    – bmike ♦
    Commented Dec 2, 2018 at 22:24
  • @bmike, And if it turns out to be a completely incorrect answer? Should we delete it afterwards?
    – Iulian Onofrei
    Commented Feb 7, 2019 at 13:22
  • @IulianOnofrei that would be an excellent question on Ask Different Meta
    – bmike ♦
    Commented Feb 8, 2019 at 1:18
  • I have the same problem on Catalina. Before upgrading to Catalina it was working fine. Ufter uğgrade there were glitches and now it started to disconnect after 15-20 seconds.
    – Olcay Ertaş
    Commented Nov 11, 2019 at 8:32
  • 1
    For additional information in trying to narrow down the issue, when mine "disconnects", it still shows as connected to my MacBook, but attempting to select it from the output devices list does nothing. The sound icon does a kind of searching animation, but that's it. discussions.apple.com/thread/250793838
    – mix3d
    Commented Nov 18, 2019 at 18:55

17 Answers 17

Reset to default
49

Try resetting the Bluetooth module.

Shift-Option click the BT menu bar item > Debug > Reset the Bluetooth module.

Improve this answer
9
  • For me the reconnection of the headset from Bluetooth -> Bose QC35 -> Connect is enough.
    – aleksikallio
    Commented Feb 20, 2019 at 15:03
  • 1
    Didn't work on cataline with Sony WH-CH500 headphone.
    – Olcay Ertaş
    Commented Nov 11, 2019 at 8:34
  • 12
    On Catalina, it still disconnects after a longer timeout now, like 2 minutes.
    – Peter
    Commented Nov 14, 2019 at 9:56
  • Clicking Connect again on the device in the bluetooth application worked to resolve the issue for a single session, but if it went into idle or reconnected the device later the same issue would happen. Resetting the module had a more lasting effect. It still disconnects occasionally but much less often.
    – theferrit32
    Commented Aug 21, 2020 at 16:57
  • Worked for me on Catalina. The only bluetooth device I have connected is my magic mouse.
    – RogerW
    Commented Sep 18, 2020 at 8:44
51

I found that Bluetooth actually works for all devices but for the audio ones. Rebooting the Bluetooth module didn't do anything, but killing coreaudiod solved my problem for good.

sudo kill -9 `ps ax | grep 'coreaudiod' | grep -v grep | awk '{print $1}'`
Improve this answer
6
  • Bluetooth would for a few seconds and then disconnect, never showing my headphones under the Sound menu bar icon. This finally fixed it for me. Thanks!
    – Sam Carlton
    Commented Apr 26, 2021 at 19:02
  • Worked great for me. After killing the process it immediately restarts and works as intended. You cal also kill it from activity monitor by searching for coreaudiod
    – Cole
    Commented Jul 7, 2021 at 22:17
  • Worked for me :)
    – Sven van de Scheur
    Commented Oct 14, 2021 at 8:57
  • This worked unlike the suggestion to reboot the Bluetooth module, and should be the accepted answer
    – Amit Beckenstein
    Commented Nov 9, 2021 at 15:10
  • 1
    Alternatively you can sudo pkill coreaudiod
    – dreikanter
    Commented Aug 12, 2023 at 10:23
19

I also had no success with the other answers mentioned here. Found this suggestion on Reddit to kill the coreaudiod process and it finally solved the problem without having to restart my computer.

Improve this answer
2
  • 2
    Is there a way to know via system logs or something to know coreaudiod has to be killed so it can be automated?
    – drfence
    Commented Sep 2, 2020 at 22:44
  • This worked perfectly for me. After killing it, the process immediately restarted and then everything worked fine.
    – Cole
    Commented Jul 7, 2021 at 22:15
10

None of the above mentioned worked for me, and then I tried this:

  • Go to System Preferences > Network > From the side pane, Delete Bluetooth PAN using the minus sign (-) at the bottom.
  • Then use the Plus Sign (+) to create a new one using the drop-down menu.

The system will re-apply profile settings and you should be good to go after that.

Improve this answer
8

I had the same problem after upgrading to Mac OSX Catalina with my Sennheiser HD 4.0 BT. I followed this guide and it worked for me.

  1. Delete /Library/Preferences/com.apple.Bluetooth.plist
  2. Clear PRAM according to Apple's instructions by rebooting and holding down Command + Option + P + R for roughly 20 seconds until either the second startup sound plays or Apple logo appears and disappears for a second time.
Improve this answer
2
  • 3
    Links may break, rendering your answer useless. Please edit the relevant parts of the linked page directly into your answer so it stands on it own.
    – nohillside ♦
    Commented Jan 29, 2020 at 6:36
  • 1
    AirPod Pros were immediately disconnecting on reconnect. Only thing I could do was Pair again. Resetting BT module didn't work. Resetting the PRAM here did work for me.
    – nitsujri
    Commented Apr 1, 2020 at 8:33
6

I tried all these things, but they didn't work. Eventually switched my wifi to 5GHz and the problem went away. Ref: Bluetooth and WiFi interfering with one another since Yosemite

Improve this answer
2
  • I have my wifi off and it's still not working.
    – O.rka
    Commented Feb 21, 2020 at 23:26
  • In my case this was very helpful. I have switched my fews WiFis to 5Ghz at home and issue disappeared on Macbook 2019. Approved answer to reset Bluetooth didn't help. So to summarise main problem is that Bluetooth uses almost same frequency band in 2.4GHz range as your WiFi at 2.4GHz (if not switched to 5GHz).
    – laimison
    Commented Aug 20, 2020 at 23:23
6

Had same issue while using Bowers&Wilkins PX7, couple of days everything was fine, then connected/disconnected hell started.

None of the provided solutions would solve issue for Bowers.

Turned out that a solution was from the other side: forgetting all devices from the headset itself restored the sound, hooray!

Improve this answer
4
  • 1
    This! To factory reset JBL speakers hold [+] and [|>] buttons till the speaker shuts down, then re-pair it again.
    – Benny K
    Commented Jun 6, 2020 at 14:54
  • Yes, this is the only thing that really helped! Thanks a lot!
    – mvp
    Commented Jul 16, 2020 at 18:32
  • same here with me
    – Dom Barker
    Commented Apr 28, 2021 at 11:48
  • That did the trick for me as well.
    – Nighto
    Commented Aug 11, 2021 at 18:03
3

I know this is an old thread but this might be an answer to those that have already tried resetting the BT module, disconnecting and reconnecting all devices, factory resetting the devices, resetting the SMC.

To start with, I was completely outraged that all the bluetooth headsets that I own weren't disconnecting at all from the Windows machines that I own but ALWAYS were disconnecting from my Macs and when I was near my Mac with my iOS devices (3 iphones (1 x SE, 2 x 11 Pro) which are connected to 2 iWatches which I use for testing software I was a little inspired and moved all of my apple devices from my workspace area and had a pair of cheap BT headsets paired and connected with my Mac and they haven't disconnected at all in more than 24 hrs.

TL;DR: If you have keyboards or watches or other wireless BT devices connected to iOS devices (phones, tables, other) keep them away from the MacOS device you have connected with your headsets or headphones and I guarantee that they won't get disconnected.

Improve this answer
2
  • 2
    So the choice is BT keyboard/mouse combo or BT earphones? Wow cheers apple, I guess I have to buy airpods now.
    – mega_creamery
    Commented Feb 2, 2021 at 16:47
  • Yeah, so I tried a process of elimination and it was my Apple peripherals that were causing the issue - the signal would otherwise keep dropping out, with stuttered audio. So, like @mega_creamery says, I will have to go and buy Apple headphones if I want to use my Apple peripherals as well 😒
    – ckhatton
    Commented Jul 26, 2023 at 14:28
2

The Bose Connect app on iPhone is my go-to for this situation. Typically the issue is that my QC 35's are connecting to other devices (Apple TV, iPad, etc.) instead of my Mac and the app allows me to disconnect the headphones from that device and then connect them to my Mac (all from within the app!).

Improve this answer
0
2

What worked for me:

  • Hold Option + Shift
  • Click the Bluetooth menu bar icon
  • Go to Debug
  • Click Remove all devices

Reconnect your Bluetooth devices.

Bluetooth menu bar icon > Debug > Remove all Devices

Improve this answer
1
  • 2
    Nope. Does not working. On MacOS Catalina, every 5 mins or so, the bluetooth always disconnected, even after removing all devices and then connecting that one device via bluetooth. The device stay connected, I still can see it in the Audio devices, I can select it as preferred output, but the Mac keeps playing the audio through default audio. I have to turn bluetooth off, turn it on again, and then reconnect to the device. And then 5 mins later, Mac will route the audio through default audio output again.
    – Chen Li Yong
    Commented Mar 19, 2020 at 5:55
2

I have the same problem with momentum 3. There is no luck after resetting the BT module, disconnecting and reconnecting all devices. Then I power off it and power on, then the problem gone.

Improve this answer
2

My problem resolved after:

  • Fully quit itunes/spotify both mac and iphone (quit and swipe up)
  • Remove device from bluetooth prefs on mac
  • Reset bluetooth module
    • macOS 14 - Monterey onward - sudo pkill bluetoothd, restart
    • macOS < 14 - Shift-Option click the BT menu bar item > Debug > Reset the Bluetooth module
  • On other devices (iPhone, iPad), go to Settings > Bluetooth > Tap the "i" next to 1 or 2 connections for the same device and tap forget the device. In my case it was "Bose NC 700" and "LE-Bose NC 700"
  • Hold the pairing button to reset bluetooth on my headphones (in my case they had to be charging and hold for 30 seconds)
  • Re-pair them to iphone, re-pair them to mac
  • Success
Improve this answer
1

In my case I had my headphones connected to charge via the keyboard despite the lack of power. I think this may have confused the blutooth as once I connected back to the keyboard and disconnected after the low power warning went away then it could connect as normal?

I hope this helps someone else.

Improve this answer
2
  • I think the error has something to do with the headphones connecting to charge via USB at some point. If anyone else can confirm let me know, but I seem to be able to re-create the error now at will.
    – Joseph Astrahan
    Commented Feb 20, 2019 at 6:07
  • The QC35 disconnects when charging. I don't have an USB-cable in mine except for actually charging.
    – Thorbjørn Ravn Andersen
    Commented Feb 12, 2020 at 14:34
1

Tried all of the options described here but none of them helped. My problem was that I tried to improve sound quality by modifying bluetooth audio options using Bluetooth explorer from additional tools for Xcode. Suddenly it stopped working after some update to Mac OS and the tool itself was crashing when I was trying to access it. Solution was to download additional tools for Xcode with lower version then 11.4 (version 9 worked for me) and then resetting it from there. Some more details here

Improve this answer
1

In Activity Monitor double click the bluetoothaudiod process and Force Quit it

Improve this answer
1

I restarted my computer and it worked.

Improve this answer
0

I experienced this issue as well. Additional details in my case are that I was using Aeropex headphones with multipoint pairing would connect to Mac and Iphone, but not show up as Mac sound output option and would disconnect from Mac within a few seconds.

In my case, I solved the issue by following other suggestions in this thread and additionally repairing the headphones.

  1. Resetting the bluetooth module
  2. Restarting coreaudiod
  3. Removing the headphones from the list bluetooth devices and repairing.
Improve this answer
2
  • This does not really answer the question. If you have a different question, you can ask it by clicking Ask Question. To get notified when this question gets new answers, you can follow this question. Once you have enough reputation, you can also add a bounty to draw more attention to this question. - From Review
    – Thinkr
    Commented Jun 13, 2023 at 20:36
  • 1
    Thanks for the review. I have edited my answer to clarify that I was experiencing the same issue and to make the solution less ambiguous.
    – dokkaebi
    Commented Jun 14, 2023 at 21:29

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .