I want to connect 4 monitors to my Mac mini. I want to send the video output to an image wall, so the 4 monitors should show one big screen.

Which adapter(s) do I need for my plan?

  • I don't think you can. The new Mac minis limit a user to daisy chaining up to 2 Thunderbolt displays (as with most Macs actually). I don't think the video card in any of the minis are sufficient to output to 4 screens. And then there's the problem of OS X support, as even if you did manage to hook them up, they may not do anything but mirror each other. – user10355 Dec 22 '11 at 18:59
  • @nextrufus Are you going to accept an answer here? Did any of the answers help? If they didn't, what issues did you run into? – Cajunluke May 29 '12 at 23:12

An old thread, but in case anyone finds this via Google, I will be a drive-by good samaritan: I'm running 4x 1920-res monitors with a 2011 mini, as the poster wishes.

Number one is connected via HDMI; number two is connected via Thunderbolt. These two are fast enough for movies and 3D gaming. Number three and number four are connected with two USB adapters, specifically this one: HIS Multi-View II Video Adapter HMV2-MAC-PC USB to DVI Interface (link: http://www.newegg.com/Product/Product.aspx?Item=N82E16815136004 ).

Many of the other brand USB adapters won't do 1920 (check carefully) or, as someone above said, will only do a single display from OS X, but I can confirm that one (at least) works with OS X (Mountain Lion, though I also used this setup with Lion).

  • 1
    And I happen to be a drive-by googler. +1 for you, sir. – timofey.com Jun 18 '14 at 23:02
  • That is made by DisplayLink and they sell their chips to other manufacturers too see here displaylink.com/shop/adapters look for 4K in the small pictures on the right. They are 'software' adapters, they take 15% of the CPU per adapter to display that data. – unom Apr 6 '15 at 21:55

This device:


Allows up to four additional displays on a mac. It won't run 1080p30 due to USB limitations, so you need to choose a lower resolution if you need high framerates, however it does get 10-15 frames per second at 1080p resolution, so for many applications it's suitable. It will run 720p resolution at close to 30 frames per second. There are other similar adaptors, but you'll have to look carefully for one that supports more than one device on the Mac. I've run into some that support multiple displays on windows, but only one on OS X.

It puts a heavy load on the computer though, so you'll need a new mac mini, the older ones will have trouble running more than one at a reasonable video framerate.

Also, no USB video adaptors that I've tested for the mac allow OpenGL or 2D acceleration. This is likely due to Apple's restrictions on their video acceleration API - most only run in the rather limited framebuffer mode. You can get Quicktime to display video, but you won't be able to run keynote presentations or iPhoto on the USB video adaptors.

If you need full video, or the software you're running requires 2D acceleration or OpeGL, you might be better of with a video splitter that takes the onboard video and splits it into several monitors. There are many devices that do that, search google for "video wall." You'll have to settle for lower resolution, but if you're running video you probably need the framerate more than the resolution anyway.


There are third-party USB to video adapters, such as this one from IOGEAR: http://www.iogear.com/product/GUC2020DW6/

Looks like you can add up to six displays (requires onboard USB ports, hubs not supported). Seems like decent reviews at Newegg: http://www.newegg.com/Product/Product.aspx?Item=N82E16815290006

I've never tried any of these, so I can't vouch for how robust they are.


You could set up two Matrox DualHead2Gos, one connected to the HDMI port and the other to the mini DisplayPort with two monitors connected to each. The DualHead2Gos will combine each pair of monitors into a single virtual monitor with the combined screen size, then arrange these larger virtual monitors atop each other in OS X's displays preferences to get your 2x2 arrangement..


I have successfully running 6 display out from late 2012 mac mini with detail as follow

  1. HDMI out from mac mini
  2. Thunderbolt out - Matrox Tripple head2go Digital SE
  3. USB to DVI Display card - 2 Unit

It was working fine with no shutting down the mac mini for a year plus now with occasionally flickering issue on some of the display but not permanent. It flickers or blink for a second or two but it will come back on.

Oh yeah 1 of matrox triplehead 2go failed me after few months running so i resolve to use 3 USB to DVI display adapter and it working fine till today.

The only setback is resolution is set to 1024 x 768 due to the limitation on GPU.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .