Can Touch ID on Mac authenticate sudo in Terminal?


14 Answers 14


With macOS Sonoma, there is now a supported option to enable Touch ID for sudo:

Touch ID can be allowed for sudo with a configuration that persists across software updates using /etc/pam.d/sudo_local. See /etc/pam.d/sudo_local.template for details.

What's new for enterprise in macOS Sonoma - Apple Support

  1. sudo cp /etc/pam.d/sudo_local.template /etc/pam.d/sudo_local

  2. sudo nano /etc/pam.d/sudo_local and follow the instructions inside, uncommenting the last line of the file by removing the # from the start of the line so the file looks like this:

    # sudo_local: local config file which survives system update and is included for sudo
    # uncomment following line to enable Touch ID for sudo
    auth       sufficient     pam_tid.so

This will persist through software updates unlike changes to /etc/pam.d/sudo.

  • 1
    Works like a charm. Worth noting if you use DisplayLink that it will still prompt you for password unless you also run defaults write com.apple.security.authorization ignoreArd -bool TRUE. Dec 22, 2023 at 9:23
  • If you'd like to use this with tmux, you would have to install github.com/fabianishere/pam_reattach and add that to /etc/pam.d/sudo_local as well (assuming you trust the author). The link also documents the problem in detail. For the same reason, you need to change an iTerm option if you want to use this with iTerm, see apple.stackexchange.com/a/355880/513181. Jan 26 at 22:16
  • If I could give comments an upvote I would for Samuel Lindblom's comment!
    – MyTallest
    Mar 7 at 20:10

To allow TouchID on your Mac to authenticate you for sudo access instead of a password you need to do the following.

  • Open Terminal

  • Switch to the root user with sudo su -

  • Edit the /etc/pam.d/sudo file with a command-line editor such as vim or nano

  • The contents of this file should look like one of the following examples:

    • # sudo: auth account password session
      auth       required       pam_opendirectory.so
      account    required       pam_permit.so
      password   required       pam_deny.so
      session    required       pam_permit.so
    • # sudo: auth account password session
      auth       sufficient     pam_smartcard.so
      auth       required       pam_opendirectory.so
      account    required       pam_permit.so
      password   required       pam_deny.so
      session    required       pam_permit.so
  • You need to add an additional auth line to the top so it now looks like this:

    # sudo: auth account password session
    auth       sufficient     pam_tid.so
    auth       sufficient     pam_smartcard.so
    auth       required       pam_opendirectory.so
    account    required       pam_permit.so
    password   required       pam_deny.so
    session    required       pam_permit.so
  • Save the file. (Note: this file is normally read-only so saving your changes may require you to force the save, e.g. vim will require you to use wq! when saving)

  • Also note that pam_smartcard.so may not be present on older MacOS versions.

  • Exit from the root user or start a new terminal session.

  • Try to use sudo, and you should be prompted to authenticate with TouchID as shown below.

    TouchID prompt

  • If you click 'Cancel,' you can just enter your password at the terminal prompt. If you click 'Use Password' you can enter your password in the dialog box.

  • If you SSH into your machine it will fall back to just use your password, since you can't send your TouchID fingerprints over SSH.

Note: See answer by user Pierz below if you're using iTerm, as there's a setting you need to explicitly change to enable this feature.

Note: Recent MacOS updates may remove the entry. If TouchID stops working for sudo then check if the entry was removed and add it back in, following these instructions again.

  • 10
    Seems to work! Are there any security implications with this? Dec 11, 2017 at 10:07
  • 2
    This worked only after I did apple.stackexchange.com/a/355880/158188 (but I did do this first)
    – aubreypwd
    Jun 18, 2019 at 2:23
  • 34
    @Znarkus one potential security implication is that, at least in the US, you cannot be compelled to give up a password by a court (it's considered a violation of the 5th amendment), but your biometrics are not secret, so you can absolutely be forced by a court to biometric auth. i'm not sure that's a concern for most people, but it's a good piece of knowledge to have.
    – sneak
    Mar 21, 2020 at 9:40
  • 15
    No need for all the steps of doing sudo su -, editing, force-saving with wq!, and exiting root. Just use sudo -e /etc/pam.d/sudo which opens the file in your default editor and seamlessly does all of the required priviledge escalation for you.
    – Caesar
    Feb 16, 2021 at 21:03
  • 1
    Don't do wq!. Do w! first. Test, test, test, then quit vim. If you make a typo you'll be locked out of your account.
    – Rol
    Feb 17, 2021 at 19:16

If you're using iTerm2 (v3.2.8+) you may have seen Touch ID failing to work with sudo in the terminal despite having made the pam_tid.so modification as above, and it working in previous versions. This is down to an advanced feature that seems to be now enabled by default - this needs to be turned off here: iTerm2->Preferences > Advanced > (Goto the Session heading) > Allow sessions to survive logging out and back in.

Alternatively you can use this pam_reattach module to retain the session feature and TouchID sudo at the same time.

iTerm preferences

  • 3
    But if you want to keep sessions restoring feature, you can try this repo with a custom pam module.
    – Leo
    Jun 7, 2019 at 23:35
  • Just tested: When using pam_reattach, one needn't either change the setting or restart iTerm — everything works right away! (I haven't tested if sessions "actually survive" since I have no clue how, but I didn't need change the setting). Jul 31, 2019 at 16:29
  • 1
    The touch ID prompt hides the full-screened hotkey-window. Is there a workaround?
    – HappyFace
    Aug 12, 2019 at 12:31
  • 6
    PSA: Do not typo anything in /etc/pam.d/sudo. If you do, you'll have to load up single-user mode to change it back. Aug 10, 2020 at 16:44
  • @Michael Alternatively you can enable root via dsenableroot which first prompts for your password and then for a new-to-set root password. If you don't have enabled the root user before, that is. (via) dsenableroot -d to deactivate again. (via)
    – cachius
    Aug 12, 2022 at 13:09
  1. TouchID does support elevating privileges, but as of now, it only seems to be supported in Apple's own apps. My guess is that 3rd party apps will have to be updated to support it, unfortunately. I still end up typing in my password a lot.

  2. See @conorgriffin's answer for instructions to enable TouchID for sudo.


I have created a simple script that enables sudo to use the TouchID PAM module exactly as conorgriffin explains. It does it in a single script that you can copy-paste to a terminal in it's entirety or use the "curl pipe bash" shortcut:

curl -sL https://gist.githubusercontent.com/RichardBronosky/31660eb4b0f0ba5e673b9bc3c9148a70/raw/touchid_sudo.sh | bash

The complete script:

#!/usr/bin/env bash 

# curl -sL https://gist.githubusercontent.com/RichardBronosky/31660eb4b0f0ba5e673b9bc3c9148a70/raw/touchid_sudo.sh | bash
# This script is ready to copy-paste in whole, or just the line above (without the leading #)

# Use TouchID for sudo on modern MacBook Pro machines
# This script adds a single line to the top of the PAM configuration for sudo
# See: https://apple.stackexchange.com/q/259093/41827 for more info.

  sudo bash -eu <<'EOF'
  # A backup file will be created with the pattern /etc/pam.d/.sudo.1
  # (where 1 is the number of backups, so that rerunning this doesn't make you lose your original)
  file_dir="$(dirname "$file")"
  file_name="$(basename "$file")"
  mapfile -t backup_list < <( ls -A "$file_dir"/{,.}"$file_name"* 2>/dev/null )
  cp "$file" "$backup" 2>/dev/null || touch "$file" "$backup"

  awk -v is_done='pam_tid' -v rule='auth       sufficient     pam_tid.so' '
    # $1 is the first field
    # !~ means "does not match pattern"
    if($1 !~ /^#.*/){
    # $0 is the whole line
    if(line_number_not_counting_comments==1 && $0 !~ is_done){
      print rule
  }' > $file < $backup


This script demonstrates a few cool patterns that I love to teach people who are new to bash or DevOps.

  1. Create a backup file that is numbered rather than simply .bak on the end. (It looks gnarly, but that pattern works with whatever is in $file and is reusable.
  2. To make it safe to do curl ... | bash, wrap everything in a function and call it on the last line. That way if the download is interrupted, nothing is (partially) done.
  3. Put a call to sudo bash -eu in your script so that you don't have tell the user to do it. (-eu are short for errexit and nounset and you should be using them!)
  4. Single quoting bash heredoc 'EOF' to prevent premature shell expansion.
  5. Making inline awk more readable.
  • 1
    The script above erroered for me: bash: line 6: 0: ambiguous redirect
    – Jan Katins
    Feb 20, 2023 at 12:44
  • 1
    The script assumes a "modern" version of Bash, @JanKatins. You'll need to install a recent version of bash from Homebrew or elsewhere. MacOS comes with Bash 3.2 (the last version under GPL 2) for licensing reasons. Bash 3.2 fails on line 17 for 2 reasons (which is line 6 of the heredoc): 1. For some reason, the <( generates 2 file descriptors, which is why it's saying ambiguous redirect. This could be fixed by using a single set of double-quotes: "$file_dir/{,.}$file_name*". 2. The mapfile builtin wasn't added until Bash 4.0. Feb 23, 2023 at 0:07
  • @BrunoBronosky This script doesn't work with the builtin MacOS Bash 3.2. I think it could be made to work by removing the mapfile line and setting backup_count to "$(( $(ls -A "$file_dir/"{,.}"$file_name"* 2>/dev/null | wc -l) ))"". Feb 23, 2023 at 0:18
  • 1
    @JanKatins The gist version should work with Bash 3.2. Feb 23, 2023 at 0:39

You can use fingerprint for getting sudo access in the terminal or iTerm, just add auth sufficient pam_tid.so to the first line to your /etc/pam.d/sudo file.

  • 6
    It might be interesting for other to know that the current iTerm version v3.2.8 doesn't allow this when another default option is set. You have to go into Preferences -> Advanced and deactivate Allow sessions to survive logging out and back in: gitlab.com/gnachman/iterm2/issues/7608#note_153123852 Mar 28, 2019 at 8:12

To wrap up Andy and Glenjamin's solution into one play:

- hosts: localhost
  - name: install pam_reattach pam module
      name: pam-reattach
      state: present
    register: reattach_result

  - name: detect touch id support
    shell: pgrep ControlStrip
    ignore_errors: true
    register: touch_id_result

  - name: enable touch id for sudo commands
      path: /etc/pam.d/sudo
      line: 'auth       sufficient     pam_tid.so'
      insertbefore: '^auth       sufficient     pam_smartcard.so$'
    become: yes
    when: touch_id_result.rc == 0 and touch_id_result.stdout != ''

  - name: enable persistent touch id for tmux and iterm
      path: /etc/pam.d/sudo
      line: 'auth       optional       pam_reattach.so'
      insertbefore: '^auth       sufficient     pam_tid.so$'
    become: yes
    when: reattach_result == 0

This can be run with just ansible-playbook sudo-touchid.yml, where sudo-touchid.yml is what I named this play.

The first step installs Fabian's pam_reattach, which allows sudo to work in iTerm, tmux, etc.

The second checks to see if this Mac has a touchbar; otherwise we're going to bail out.

Third, we're seeing if we already added pam_tid.so to /etc/pam.d/sudo, and only if there is a touchbar.

Finally, we also add pam_reattach.so as an optional auth method. According to the author, he might have have some unknown bug, and if we used required it could result in a lockout.

  • 3
    This answer may benefit from an explanation on how to actually use it and why the different parts are necessary.
    – nohillside
    May 28, 2020 at 14:59
  • Turns out pgrep ControlStrip succeeds also on my M1 Max MBP 2021, even if it has no touchbar any more. Dec 24, 2021 at 20:20
  • 1
    really? I have a M1 Max MBP 2021 on macOS 12.6.2 (Monterey, ARM) and there is no ControlStrip process.
    – huyz
    Jan 16, 2023 at 14:52
  • On my M2 homebrew installs the PAM module to /opt/homebrew/Cellar/pam-reattach/1.3/lib/pam/pam_reattach.so so PAM doesn't find it. Then one is logged out.
    – Benibr
    May 4, 2023 at 10:54
  • This is how I test for the presence of Touch ID: test $(bioutil -sr | sed -n 's/\([[:space:]]\+\)Biometrics functionality: \([[:digit:]]\+\)$/\2/p') -gt 0.
    – nikolay
    Aug 29, 2023 at 2:19

Open /etc/pam.d/sudo_local.template. I used BBEdit.

Uncomment the 3rd line #auth sufficient pam_tid.so

Save as /etc/pam.d/sudo_local.

The first line of /etc/pam.d/sudo already includes this _local file: auth include sudo_local

TouchID should now be an authorization method for Terminal.app, and should survive updates etc.

  • 1
    I think this new for MacOS 14 Sonoma
    – Pierz
    Oct 30, 2023 at 11:45
  • 1
    I guess that makes this the most current (and correct) answer then :) Nov 6, 2023 at 15:12

I created the following ansible tasks to enable touch id for sudo commands if your computer supports it:

- name: detect touch id support
  shell: pgrep ControlStrip
  ignore_errors: true
  register: touch_id_result

- name: enable touch id for sudo commands
    path: /etc/pam.d/sudo
    line: 'auth       sufficient     pam_tid.so'
    insertbefore: '^auth       sufficient     pam_smartcard.so$'
  become: yes
  when: touch_id_result.rc == 0 and touch_id_result.stdout != ''

My 1 string answer:

sudo su root -c 'chmod +w /etc/pam.d/sudo && echo "auth       sufficient     pam_tid.so\n$(cat /etc/pam.d/sudo)" > /etc/pam.d/sudo && chmod -w /etc/pam.d/sudo'

What does a command do?

  1. First, I indicate that I want to do everything from root (using sudo, the trick will not work (more precisely, it will, but more difficult to implement)
  2. Then I give write permissions to /etc/pam.d/sudo
  3. Then I add the line auth sufficient pam_tid.so to the beginning of the file. See that post
  4. Then I take away the granted write permissions /etc/pam.d/sudo , taking into account Matin ZD remarks

P.S. While experimenting broke sudo and su in the terminal, it is repaired like this https://support.apple.com/en-us/HT204012 enable root

su - root
vim /etc/pam.d/sudo

Revert the file to its original state


This one-liner will insert the auth line described here as the second line of the sudo config file (so that it appears first after the comment line).

sudo sed -i -- '2s/^/auth sufficient pam_tid.so\n/' /etc/pam.d/sudo

Here's a Gist to make it as simple as possible.


  • 2
    Please summarise your Gist into this answer. Link-only answers are not preferred here, as if the link disappears, your answer is worthless. Feb 18, 2023 at 0:45

One thing to mention is that you should first change the file permission then try to make changes:

sudo su -
chmod u+w /etc/pam.d/sudo

Adding this line at first line:

# sudo: auth account password session
auth       sufficient     pam_tid.so # << Add this here ;)
auth       sufficient     pam_smartcard.so
auth       required       pam_opendirectory.so
account    required       pam_permit.so
password   required       pam_deny.so
session    required       pam_permit.so

Then revert it back file permissions when you are done with:

chmod u-w /etc/pam.d/sudo

  • 2
    I've been doing and recommending this change for years and never heard of anyone needing to do this. If this is sometimes necessary, I think explaining when would be useful, otherwise this appears to be completely extraneous.
    – grg
    Jan 16, 2021 at 22:43
  • I had a focus on permissions, not for that line ;) @grg Also If you want to change the file or write to it by default the file permission is 444 which is not writable by anyone. Jan 17, 2021 at 23:20

In addition to the top comment of Michael https://apple.stackexchange.com/a/306324/388071 the Touch ID permissions process can be simplied by just opening Terminal (CMD + space: 'Terminal'), and run: echo 'auth sufficient pam_tid.so' | sudo tee -a /etc/pam.d/sudo with your admin user password

enter image description here

Note that TouchID also gets automatically disabled after each MacOS update. To automatically re-enable the touch ID running this command you will add an automatic repair check to your bash profile:

echo 'if ! grep -q "pam_tid.so" /etc/pam.d/sudo; then
  echo "Updating /etc/pam.d/sudo to activate Touch ID authentication permissions from Terminal:"
  echo 'auth       sufficient     pam_tid.so' | sudo tee -a /etc/pam.d/sudo
  echo "pam_tid.so permissions updated:\n\n$(cat /etc/pam.d/sudo)"
fi' >> .bashrc # Change this to `>> .zshrc` when using Oh-My-Zsh

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .