I got Raspbian on a SD card, and then accidentally wiped it. Now I have 2 visible partition. How do I get rid of the partition on a Mac.
diskutil command on macOS is incredibly powerful and can do all that you need. (You can run the following in the Terminal app.)
Find your SD card:
$ diskutil list
$ diskutil list external physical
On the right, under
IDENTIFIER, you'll see your disk labeled like
disk3, etc. You can use that label to reference your SD card from now on. I'm going to use
disk2 for my example commands, but make sure you use your actual identifier.
For a board like the Raspberry Pi, you'll want FAT32 with MBR (Master Boot Record). Run:
$ diskutil eraseDisk FAT32 RASPBIAN MBRFormat disk2
disk2 is your SD card identifier from earlier.
RASPBIAN can be anything. It'll name the Volume, which is what you'll see once it's mounted. The
eraseDisk command will handle unmounting and remounting of the disk, so you don't need to worry about that.
That should be all that you need. You will end up with one FAT32 partition. It will look something like the following if you run
diskutil list external:
/dev/disk2 (external, physical) #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *15.8 GB disk2 1: DOS_FAT_32 RASPBIAN 15.8 GB disk2s1
You can then copy over the Raspbian NOOBS files to the SD card.
If you want to fully zero out or randomize your SD card, you can run:
$ diskutil unmountDisk disk2
$ diskutil zeroDisk disk2
$ diskutil randomDisk disk2
randomDisk command seems to prefer an
unmountDisk command beforehand.)
Afterwords, you'll need to run that
eraseDisk command from earlier to format it in order to be able to use the SD card.
Many other commands are available. Run
man diskutil to see them all (
q to quit the manual page).
Assuming Disk Utility doesn't work, try formatting the card using the SD Association's official formatting utility. It may seem a bit silly to download a program just for formatting SD cards, but I've had it fix all sorts of strange errors when nothing else worked, including disk utility / diskutil.
I'll try a short step by step method:
find the device identifier of the memory card, it will be smthg like /dev/diskX
The format command is:
diskutil eraseDisk FILESYSTEM CARDNAME DEVICEIDENTIFIER
This will reformat the disk DEVICIDENTIFIER with one partition with file system FILESYSTEM and give it the name CARDNAME. Careful, all other partitions will be removed!
- Replace DEVICEIDENTIFIER with the device identifier from above, e.g. /dev/disk3 or whatever your disknumber is.
- Replace CARDNAME with the name you want to give your memory card
Replace FILESYSTEM with your desired filesystem identifier. You can get a list of available filesystems with:
so as an example:
diskutil eraseDisk FAT32 MYCARD /dev/disk3 -> formats the memory card /dev/disk3 as a single partition FAT32 card named "MYCARD"
Use Disk Utility to repartition the drive. It should be able to accomplish everything you need, including reformatting as well if you need it.