38

The native caffeinate utility is not working to prevent my macbook from sleeping when I close the display. Instead, the system sleeps and various network services ( VPN, screenshares, VOIP calls, messaging clients, file transfers ) to fail while I walk from my desk to my meeting in < 5 minutes.

Walking around with the laptop lid half open makes it difficult to safely carry with my coffee, and is distinctly uncool.

The native caffeinate utility is designed to handle this as a user-friendly replacement for pmset, but appears to be designed not to work when disconnected from AC power.

Docs via man caffeinate

-s Create an assertion to prevent the system from sleeping. This assertion is valid only when system is running on AC power.

Looking for a native alternative to InsomniaX or nosleep.

A timeout feature is essential so that I avoid accidentally stuffing my undead macbook into a bag, resulting in a hot mess. ( caffeinate -t, specifies the timeout value in seconds )

  • I fear there is no native alternative, as a MacBook is supposed to go to sleep when you close it. :-/ – Asmus Dec 16 '15 at 23:31
  • 2
    Walking around with MacBook is exactly why I also want a solution for preventing sleep when lid is closed. – theonlygusti Sep 19 '17 at 15:06
  • Did you try the option -t, like caffeinate -t 3600? According to my experience, it works even if the macbook is running on battery. – Qiang Xu Mar 1 '18 at 17:04
  • Thanks for suggestion, didn't work on initial attempts. Am I missing something? Tested 1) caffeinate -t 3600 2) Close laptop 3) Wait 5s 4) Open laptop to find login screen and disconnected network services. – here Mar 1 '18 at 19:09
  • @here I didn't try to close the lid, though. I just ran the command with -t option when my macbook is on battery, and it didn't go to sleep. I haven't tried with the lid closed, but it looks the macbook will be forced to sleep as soon as you close the lid. Sorry for my misunderstanding. I was thinking you were looking for a way to make it work when it runs on battery only, without the lid closed. – Qiang Xu Mar 1 '18 at 19:33
33

It's not ideal, but here's a solution. To prevent the laptop from sleeping when the lid is closed and you're running on battery, run the following commands:

sudo pmset -b sleep 0; sudo pmset -b disablesleep 1

To re-enable laptop sleeping when the lid is closed and you're running on battery, run the following commands:

sudo pmset -b sleep 5; sudo pmset -b disablesleep 0

The "5" in the second set of commands represents the number of minutes before sleeping when on battery; adjust as desired for your laptop.

This is a bit dangerous, since if you forget to re-enable your settings, the laptop will never sleep when on battery. Because of this, I've written a shell script to automatically re-enable the settings:

#!/bin/bash
#***************************************************************************
#*** noz - prevent laptop from sleeping when lid is closed
#***************************************************************************

#***** set some defaults *****
BATTERY_SLEEP=5 # in minutes
DEF_WAKE_LEN=300 # in seconds

#***** determine timeout value *****
timeout_len=${1:-$DEF_WAKE_LEN}

function prevent_sleep() {
    echo
    echo -n "Preventing sleep for $timeout_len seconds; press <enter> to continue..."

    sudo pmset -b disablesleep 1
    sudo pmset -b sleep 0
}

function enable_sleep() {
    # $1: <enter> = 0, timeout = 1, Ctrl-C = undef

    #----- insert a newline for timeout or Ctrl-C -----
    if [[ ${1:-1} -eq 1 ]]; then    echo; fi
    echo "Restoring previous battery sleep setting: $BATTERY_SLEEP"

    sudo pmset -b disablesleep 0
    sudo pmset -b sleep $BATTERY_SLEEP

    #----- sleep on timeout only -----
    if [[ ${1:--1} -eq 1 ]]; then   sudo pmset sleepnow; fi
    exit
}

#***** prevent it from sleeping *****
prevent_sleep

#***** trap Ctrl-C *****
trap enable_sleep INT

#***** wait for an enter *****
read -t $timeout_len
rc=$?

#***** re-enable normal sleep *****
enable_sleep $rc

The shell script will disable sleeping until you hit the Enter key, at which point it will re-enable the sleep settings (alternately, you can hit Ctrl-C and achieve the same thing). It will also set a timeout (defaults to 300 seconds/5 minutes) after which the sleep settings will automatically be re-enabled, and the laptop will be forced to go to sleep. While this would be a pain if you're using your laptop in a meeting, it will be a lifesaver if you forgot and put your laptop in your bag to go home.

Astute readers will note that these commands require sudo; sadly, that's unavoidable AFAIK. What I've done on my system is to make it so that I don't have to enter my password to run pmset as root. To do that, edit the sudoers file (sudo visudo) and add this line:

joe ALL=(ALL) NOPASSWD: /usr/bin/pmset

replacing "joe" with your username. You could probably achieve the same result (i.e. running the script without having to enter your password) by running the shell script SETUID, but I don't like doing that; opening up this one command via sudoers seems less risky to me.

To run the script, stick it in a directory on your PATH and invoke it as such:

noz [<timeout in seconds>]

When you get to where you're going, simply hit Enter or Ctrl-C and you're good to go. And if you forget about it, it will automatically reset and sleep.

There's probably a way to achieve all of this via AppleScript, so that you can then assign it a hot key and what not; I'll try that if I ever get tired of running this from the command line.

  • 6
    Cool! Thanks a lot! A suggestion / simplification: I don't think you need to change the sleep setting. Just switch disablesleep on and off. pmset -a disablesleep 1 and pmset -a disablesleep 0 work fine for me. My MacBook doesn't got to sleep when I close the lid. All other settings remain the same. – jcsahnwaldt Nov 1 '17 at 2:17
  • Github user iccir has made a free app called Fermata that uses this trick under the hood and wraps it up nicely with a menubar icon and a timer, etc. I just tried it on Mojave (10.14.2) and it worked great for me. github.com/iccir/Fermata – Alex Ryan Dec 31 '18 at 8:08
2

Github user iccir has made a very handy little free menubar app called Fermata that does exactly what you want: keeps a MacBook awake with the lid closed, and allows you to set a timeout duration.

I just tried it on Mojave (10.14.2) and it worked great for me. https://github.com/iccir/Fermata

1

Have you tried this app? I find it very useful for exactly what you're after.

I'm fairly sure it has a timeout feature that you set within the settings of the app.

0

There's no native way to do it. Here is what I got after some searching and trials:

enter image description here

Note:

  • Nosleep's kernel extension failed to be loaded on High Sierra
  • The private SPI is NOT supported by Apple after High Sierra. Fermata switched to the pmset method after version 1.1
  • You may need to disable Gatekeeper to let Insomnia work as expected.
  • The other apps I tried don't work with lid closed

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .