0

Mac pro 8 core early 2008 mountain lion installed.

I need to clean install Yosemite.

The pendrive does not show when you press alt, at the boot screen. Nevertheless it shows on configuration startup disk, but is not booting from this volume. The problem does not seem to be on the pendrive, since it works fine on a macbook, but does not show on the mac pro.

Please help, I´ve tried many times with no success.

  • does any other USB shows ? – Ruskes Mar 30 '15 at 17:04
  • Double check your model MacBook (Late 2008 Aluminum, or Early 2009 or newer) MacBook Pro (Mid/Late 2007 or newer) – Ruskes Mar 30 '15 at 17:07
  • did you try the cmd+r – Ruskes Mar 30 '15 at 17:08
  • not much in the way of an answer, but I've never been able to get my Pro 3,1 to boot from an installer USB stick either. Just doesn't see it as bootable. Boots from an old DVD, but not USB - I've always used a spare drive to set up an OS; clone, install, test, remove old drive once happy. – Tetsujin Mar 30 '15 at 18:13
  • might give this a try - apple.stackexchange.com/a/163327/85275 [ahh, but that's an MBP] … or apple.stackexchange.com/a/20264/85275 – Tetsujin Mar 30 '15 at 18:15
1

Here's something to try...

If your Mac Pro has issues with booting from USB but will boot from a DVD, create a DVD from the USB installer. If you know how to do this then ignore the rest, grab a dual-layer DVD and get cracking. If not, read on...

First, mount your USB installer and then go to Disk Utility. Highlight the partition Install OS X Yosemite on the upper left pane then go to File > New > Disk Image from "Install OS X Yosemite". Select DVD/CD master as the image format then hit the Save button when you're ready.

After a few moments you will have a disk image with the extension .cdr. This should be listed in Disk Utility on the lower left pane - highlight it and select Burn. You will need a dual-layer DVD for the burning operation.

If you can boot from the original Apple installation discs you should be able to boot from your newly created DVD, and hopefully it will appear as a boot option. Be warned, booting from the Yosemite DVD will take a small eternity, the installation itself will take quite a bit longer. Still, it's better to get there slowly than not at all ;-)

Alternatively, if you have a spare hard disk you could clone the Yosemite USB installer partition onto that using Disk Utility's Restore function. This should in theory be much quicker but I've not tried it out yet. I have had a successful boot and install from DVD on a MacBook (school's out for Easter so no access to a Mac Pro at the moment) so at least we know it's possible to create a working DVD installer.

Small addition - when installing from DVD the progress bars will lead to you to believe it's actually going to take forever, if not slightly longer. However, these do tend to stick at certain points while the system's busy and the whole process should be done in just over an hour.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .