0

I charged my MacBook Air (Late 2010) up to 100% charge overnight however my battery died within 1 hour. Because of this I want to use the Apple Hardware Tool (AHT) to diagnose the issue.

My Mac is 4 years old and holds up to 70%-75% of its original capacity (6,700mAh).

I have tried holding the D key when booting my computer however it boots up normally.

How would I accesses the AHT?

0

Here you find an extensive list with various links to AHT images.

The direct links to the AHT of your model are: 13" MacBookAir3,2 or 11" MacBookAir3,1.

To copy the .diagnostics folder, mount the dmg and enter for the MacBookAir3,2 AHT:

sudo cp -R /Volumes/AHTBOne/System/Library/CoreServices/.diagnostics /System/Library/CoreServices

or for the MacBookAir3,1 AHT:

sudo cp -R /Volumes/AHTBTwo/System/Library/CoreServices/.diagnostics /System/Library/CoreServices

and enter an admin password at the prompt.

After copying the folder successfully try again to boot to Diagnostic Mode.

  • Thank you for your reply. I have not tried this yet since my Mac is working normally again. I shall mark it as answered since it looks like it should work and it will mark this question as answered. – iProgram Mar 27 '15 at 18:09
0

Your AHT feature will have been lost when you upgraded to Yosemite.

You can restore it by inserting the Applications Install disc that was supplied with your computer and typing the following command, putting in the actual name of the disc where indicated...

sudo cp -R /Volumes/[name of disc]/System/Library/CoreServices/.diagnostics /System/Library/CoreServices

You will of course be able to run the diagnostics directly from the install disc.

  • Actually read the question properly and of course your Air doesn't have an optical drive - did it come with any re-installation media? If not you now know where the actual test file should go, if anyone can supply you with the required file
  • No, I don't have the disk. I think (but I'm not sure) I still have a Mavericks install application on my external hard drive. Could I use the AHT using that? – iProgram Mar 10 '15 at 12:11
  • I've checked and your Air should have come supplied with a USB software installer - not sure about the Mavericks installer, I will check shortly but I doubt it will have the appropriate AHT build for your Mac. – ScunnerDarkly Mar 10 '15 at 12:37
  • If you're looking to download the AHT for your Air the specific one you need is AHT build 3s142. – ScunnerDarkly Mar 10 '15 at 12:40
  • Thanks. Do you know where I can get it? I don't have the installation media since I got it second hand. – iProgram Mar 10 '15 at 12:51
  • 1
    Start with Google and search for Apple 3s142 - there is a chance I have a copy at home as I'm a magpie for such things (you never know when these things will come in handy), will check when I finish work. – ScunnerDarkly Mar 10 '15 at 12:56

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .