There is no option in the Bootcamp wizard to choose the Windows ISO.. Any ideas?
I followed this tutor here and got success: https://www.youtube.com/watch?v=hE8If6gabUI.
The "Create a Windows 7 install disk" option is hidden because your system's capabilities are limited. For instance, older Macs can not boot from external USB disks, therefore creating an installer onto a USB disk would make no sense.
Still, if you want to create an installer on an external disk regardless, all you have to do is edit Boot Camp Assistant's "Info.plist" file:
- Open Package content of Boot Camp Assistant app, backup
Info.plistfile somewhere, then open the old one with XCode.
- Edit file:
- Edit section's title:
USBSupportedModels(if it's already
USBBootSupportedModels-> skip this step)
- Add your System's
model identifier(Find it by
System Informationapp) into
- Add your
Boot ROM version(Find by
System Informationapp) to
- Restart BootCamp
A comment of @dusanvf:
If your Bootcamp crashes after this, write this into terminal:
sudo codesign -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app/
Here is the page which helped me to enable this option Create a Windows Install USB on OS X Yosemite.
Creating a Windows installer from OS X is actually quite simple - Boot Camp Assistant can do it for you. If you’re on a newer machine without an optical drive, you probably have an option that says “Create a Windows 7 or later version install disk”. Click that and point it to your ISO image. Done.
If you’re on an older machine (like my Hoth), you won’t find this option. Don’t Panic! Hacking Boot Camp Assistant into small bits and reassembling it will do the trick.
First of all, we’ll modify Boot Camp Assistant’s Info.plist. It’s at
/Applications/Utilities/Boot Camp Assistant.app/Contents/Info.plist. Open it in your favorite text editor. (Note: this requires elevated privileges).
Note: If you are running OS X 10.11 or newer, you will be unable to edit
Info.plist. Instead, copy
Boot Camp Assistant.appto your desktop, and follow the instructions using the copy.
Once we’re in
Info.plist, we’ll tell it which machines can create USB disks. Look for the key PreUSBBootSupportedModels. Change it to USBBootSupportedModels. Makes sense, right? Save.
Then, we’ll need to resign Boot Camp Assistant, otherwise it will refuse to run. For this, we’ll need the Xcode command line tools installed. Then it’s as easy as
sudo codesign -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app
Now restart Boot Camp Assistant, and you’ll find the option you were looking for.
If the "Create a Windows 7 or later install disk" check box does not appear, then an USB flash drive can not be used to install Windows on your Mac. An example of this check box is shown below. Since your Mac does not show this check box, I assume you have an optical drive. You need to burn the iso image to a blank DVD using the Disk Utility application.
Now there are ways to make this check box appear so the files can be copied to the flash drive, but most likely the firmware in your Mac will not allow you to boot Windows from a flash drive. Even if you can boot to OS X using a flash drive, this does not mean you can boot to Windows using a flash drive. You need to boot to Windows from the optical drive to install it on to your internal drive.
Steps to burn an iso to DVD: (Taken from Burn ISO in Mac OS X)
As for the drivers for Windows. You can either download them using the Boot Camp Assistant or download them from Boot Camp: System requirements for Microsoft Windows operating systems. You install the drivers after you finish installing Windows.
One final note: Do not change the partitioning using anything from Microsoft. The partitioning can only be successfully changed using OS X software. The only exception is Windows can format the BOOTCAMP partition.
If anybody is struggling with this on Mojave (10.14) it's pretty simple:
PreUSBBootSupportedModels, so only
USBBootSupportedModelsremains and add your model in there.
This is correct. You need to have a bootable media with Windows on it to install Windows on bootcamp. When the process reboots to install Windows, the .iso will be unmounted and useless.
You can write the ISO to a flash drive (8GB or more) using disk utility and use that.
Actually, if I recall correctly, the Bootcamp installer should make the bootable install media (8GB flash drive) itself.
If you just mount the ISO so that it shows up as a disk (double click on the ISO) that may be all you need to do. The BootCamp Assistant will then see the file as a (virtual) drive and copy the necessary files to your install media.
Here as an article that describes how to get the option back http://tsentas.net/create-a-windows-7-or-later-version-install-disk-missing-on-el-capitan/
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?