Is it okay to connect non-Apple headphones to an iPhone (a 5s, in this case) or do I need to use apple branded or authorized headphones for some reason?


7 Answers 7


Here is the visual comparison of Apple TRRS plug and a standard TRS plug.

3.5mm plug comparison: iPhone plug with TRRS configured as left, right, ground, mic vs. standard stereo plug wit TRS configured as left, right, ground. In the image both tips point to the right.

On the top you can see a 4-pin headset connector. A headset connector needs to be using the same TRRS standard, or it will not function properly if at all.

On the bottom you can see a 3-pin headphone connector. Any headphone connector will work fine.

Standard 3.5mm jack stereo headphones have a 3-conductor configuration of TRS (Tip, Ring, Sleeve). The pinout for these connectiors is: Left Audio, Right Audio, Ground. Connectors for headphones with a mic have an additional ring which results in a 4-conductor TRRS configuration (Tip, Ring, Ring, Sleeve).

There have been different TRRS standards:

  1. The original OMTP configuration, which was created by Nokia and has a pinout of Left Audio, Right Audio, Mic, Ground.
  2. AHJ (American Headset Jack) with a pinout of Left Audio, Right Audio, Ground, Mic.
  3. CTIA, named after The Wireless Association, which replaced AHJ and has the same pinout. CTIA jacks have improved compatibility to support not only AHJ but also OMTP. CTIA is by default required for Android device manufacturers.

TRRS layout
Source: All About Windows Phone

Wikipedia has a short overview for which device uses which standard.

At last a few points to note:

  • Plugging an OMTP headset into an AHJ jack, and vice versa, will result in the audio-out being inaudible or very quiet. Converters to switch between the two types of headsets are readily available, but do add extra bulk, and may not work reliably with remote control functionality.
  • Apple uses a CTIA/AHJ connector arrangement, but uses a non-standard microphone and volume control signaling method. Simple commands like Play/Pause and Skip however should work across modern mobile devices.
  • Minutes before boarding I once bought a "Android compatible" Xiaomi headset with the assumption this well-built and well-known brand would be compatible with my iPhone. The result was not good. Sound was very quiet indeed none of the buttons had the desired effect. Connected it to somebody's Android: worked perfectly! Taping down the play button gave much higher sound output saved my flight. Strange thing: the headset sound seemed work just fine with my macbook.
    – EDP
    Feb 7, 2016 at 5:32
  • I had the exact same experience with another product. Did you find a workarround ?
    – ppr
    Mar 31, 2017 at 14:11
  • I found this site helpful Smartphone Headset Standards: Apple iPhone, AHJ (CTIA), & OMTP – Headset Buddy Help "In general the audio out and one button control on such headsets will work, but the audio-in (microphone) and volume controls will not. Some headset manufacturers produce dual version products that have wider support (presumably supporting more than one signalling method), but working out which is which is a little hit and miss." Sep 24, 2020 at 4:26

Any headphone with a 3.5mm jack will work.

But be mindful about the remote controls. If it doesn't specifically says compatible with iPhone/iPod, it may not work with your iPhone.

As long as you just care about listening to sound on the headphones, as long as the tip is undamaged and standard, you won't harm the iPhone using any headphones.

  • 1
    Why should we be careful? Jun 24, 2014 at 11:45
  • 3
    I you want to use the microphone or the remote controls you might get some frustration if it's not compatible :) Jun 24, 2014 at 11:51
  • 2
    perhaps "be mindful" is a better term
    – stuffe
    Jun 25, 2014 at 15:21

Any headphones with a 3.5mm headphone jack will work fine with the iPhone, not just Apple products.


Sennheiser makes great headphones for iPhone with working mic/remote. I have the version for Android phones and everything works fine and sounds great. Just make sure you check the package for the "made for iPhone" label.


And note that some headsets have plugs with 4 metal bands, but the order is different, these won't work (older Nokia, for instance):

Instead of "mic, ground, right, left" they will have "ground, mic, right, left"


I misplaced my iPhone headphones but had my old Blackberry Bold headphones (with the remote attached). These worked perfectly on my iPhone 5.


I use Yurbuds Ironman Inspire Black In-Ear Sport Headphones, purchased at a TELUS store and they work perfectly well as regular earphones when I want privacy as well as in the proper mode including the mic function with my iPhone 5s and they should also work with an iPhone 6.

  • We don't really need a list of every brand that works or doesn't. The criteria are simple enough.
    – Tetsujin
    Feb 7, 2016 at 9:50

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .