2

I’m trying to install Snow Leopard Server 10.6.3, which I just purchased from Apple (so it’s not tied to any hardware), into a VMWare Fusion 5.x VM, and the install keeps failing.

At first I was getting “ERROR_DOWNLOAD_FAILED” as the reason, so I disabled the network adapter for the VM to see what happened. At that point, it failed with the even more helpful “support files could not be installed”. That’s it; it didn’t bother to tell me which support files, just that they couldn’t be installed. When I tried again, it went back to “ERROR_DOWNLOAD_FAILED”. I turned the network adapter back on, and failed the same way.

I’m using the default install options, which should require a little under 12GB, and the VM’s HD has 43GB available. The machine I’m running the VM on is a MacBook Pro (i7) running OS X 10.8.

Any insights are appreciated!

EDIT: see my answer below for the resolution, which required two steps.

1

I found a link that might help: https://communities.vmware.com/thread/457351

You have Server, so that should be OK, try ripping it into a disk image (if you haven't already done so) and see if it will work with that instead.

I only have personal experience with Parallels, so I can't try it myself.

  • Creating a DMG now; I’ll report back with results. Thanks for the leads! – Eric A. Meyer Feb 5 '14 at 17:15
  • Followup: the DMG approach definitely got me further, but then I ran into a CPU problem. Overcame that, looks like, but I’m still updating. I’ll write up everything once I’m finished! – Eric A. Meyer Feb 5 '14 at 22:07
0

In the end, it was a confluence of two things: trying to install from physical media, and CPU incompatibility. Here’s how I got past it:

First, I created a disk image (.dmg) of the install disc, as per BoxOfSnoo’s answer. The thread s/he linked to led me to the VMWare Community article Creating a disc image from physical Mac OS X install media, which I used to get me past the “ERROR_DOWNLOAD_FAILED” barrier.

With that resolved, however, I immediately ran into the error “The CPU has been disabled by the guest operating system.” Googling that led me to the VMWare KB article Installing OS X Snow Leopard Server on an i5- or i7-based Macbook Pro fails with the error: The CPU has been disabled by the guest operating system (1026103), which informed me that OS X 10.6.3—the version that Apple ships you when you order it—is not compatible with i7 (and other) Macs.

I used the .vmx editing solution shown in that article to mask the CPU, which let me finish the installation. That done, I ran Software Update in the VM to update to 10.6.8, which can handle i7 (etc.) CPUs. Then I shut down the VM, removed the CPU-masking line I’d added to the .vmx file, and launched the VM. Success!

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .