Force external display refresh rate

Question

I have a 27" screen which is connected to my mid-2012 MacBook Pro retina through a HDMI/DVI-D (HDMI on the MacBook Pro, DVI-D on the screen).

Before I was using a adapter DisplayPort+USB/DVI-D and I was able to get 60Hz refresh rate.

Now with the HDMI/DVI-D I have only 30Hz.

Is there any way to change (by forcing?) refresh rate to 60Hz?

Or is it a hardware limitation?

NOTE: I can't change the Refresh Rate value from System Prefs, the menu is disabled and the value is set to 30Hz.

EDIT: Here's the System Prefs window

Answer 1

cscreen

You can use the freely available Terminal app cscreen to force display settings. The app is pretty self explanatory.

brew install --cask cscreen

cscreen -h
Usage: cscreen [-d <depth>] [-x <width>] [-y <height>] [-r <refresh>] [-s <display>] [-v] [-m] [-f] [-l] [-h]
           [-d <depth>]    : specifies the bit depth (bits per pixel)
           [-x <width>]    : specifies the width in pixels
           [-y <height>]   : specifies the height in pixels
           [-r <refresh>]  : specifies the refresh rate in Hz
           [-s <display>]  : specifies which display to use (defaults to main display)
           use a as the option to -s to specify the action on all displays
           [-i <displayID>]: picks a display based on CGDirectDisplayID (permanent per display)
           continue to use '-s a' for "all displays"
           [-v]            : display valid modes (use -s to specify display or nothing for the default)
           [-m]            : require an exact match
           [-f]            : forces settings (ignores safety mechanisms; USE AT YOUR OWN RISK)
           [-l]            : lists the current displays and modes
           [-p]            : sets the requested display to have the menu bar
           [-h]            : displays the usage
           
           Note: Using -p will change the display index so you will likely want to use -l again to show the current
           displays if you wish to use -p a second time.

Answer 2

When you're on the new Macbook Pro (post 2017), and you've connected your external display to one of the ports on the right side of your MacBook, the refresh rate settings dropdown may be disabled.

This will also happen with a display that you've previously connected to the left side and later connected to the right side.

That is due to the limitations of the MacBook:

The two ports on the right side of the machine have Thunderbolt 3 functionality but with reduced PCI Express bandwidth. For that reason, Apple recommends plugging higher-performance devices into the left-hand ports on that machine.

After you've connected your external display to the left side of your MacBook, you can set it back to 60 Hz by doing the following:

• Open System Preferences » Display
• Hold the option key
• Click the Scaled button
• Check the "Show low resolution modes" box
• Set the Refresh rate to 60 Hz

See the example here:

Answer 3

I can only change the refresh rate for the 4K TV connected to my MacBook Pro (15-inch, 2016, Big Sur) by following these steps:

1. Open System Preferences, then click Displays.
2. option+click the Scaled radio button.
3. Click the "Show low resolution modes" checkbox.

If steps 1-3 above are not completed, the refresh rates are not visible.

Answer 4

If you are using a USB-C adapter (or any other adapter such as older thunderbolt), check to see if the adapter supports 60Hz. Had a similar issue with INSIGNIA Slim Profile 7-Port USB-C HUB, read the paper inside the adapter box and found that it supports 30Hz max only.

Answer 5

I came here searching for the answer myself because I've done it before but I installed an update and lost the settings. csreen and switchresx can both set the resolution for you, but there's a limit in OSX that needs to be bypassed in order to accomplish this. Additionally with the latest versions of OSX there's some sort of "system file protection" that prevents you from patching the relevant file. First, you have to disable that file protection (which I think gets turned on after each update) and then you have to patch the relevant file in OSX. If I find the answer for the latest version then I'll come back here and update the answer but you should google something to the effect to osx (your version) pixel clock unlock patch. Once you patched the relevant files you should be able to use utilities like switchresx (which is what I use) to set custom resolutions. I've found a patch for one version of osx here: https://github.com/Floris497/mac-pixel-clock-patch good luck!

Answer 6

You should be able to change the refresh rate in System preferences- Monitor.

This is an example of my HDMI to HDMI connection.

You can try using the SwitchResX app to see if that will work.

FYI: Something is happening with Mavericks and external display (similar to yours) but I am not qualified to talk about what.

Answer 7

RDM screen management is a simple menu bar tool that does this well. https://github.com/avibrazil/RDM

EDIT:

The original app is unmaintained. There is a fork that is still alive, so you should use the fork instead: https://github.com/usr-sse2/RDM

Answer 8

After much googling and trials, I have come to the conclusion that if your hardware (both computer/screen) doesn't support higher frequency, well, you can't force it.

As for my own case, it was the both not available (old MacBook Pro + Dell cheap 27" "fake 4K")