Timeline for Screen Blacks Out After Fans Run at Maximum
Current License: CC BY-SA 3.0
13 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Apr 25, 2017 at 1:26 | vote | accept | Jbr | ||
Dec 11, 2015 at 18:21 | answer | added | Tom Bell | timeline score: 0 | |
May 31, 2015 at 2:24 | answer | added | mrbear | timeline score: 0 | |
Apr 10, 2015 at 20:39 | comment | added | Jbr | I don't know what to look for in the cable to the LCD. It seems to seat properly. It didn't look cracked. | |
Apr 10, 2015 at 20:35 | comment | added | Jbr | The "overheating" is consistent. Turn on computer, wait five to ten minutes and the fans start speeding up. The GPU associated temperatures increase steadily. The exhaust air is not hot. It doesn't even feel warm. There are three temperature sensors associated with the GPU and all show excessive temperatures so could they all be defective? Isn't one of the sensors in the GPU itself? | |
Apr 9, 2015 at 16:32 | comment | added | Ruskes | Did you check the cable to the LCD? Since it is sporadic it might be just the connection been flaky. If it is the LCD it would be permanent. | |
Apr 9, 2015 at 16:15 | comment | added | Ruskes | If it is LCD than the fans would not be working like crazy. 262F is way to high, wonder if it is the TC sensor ? Does it actually blow hot air out ? | |
Apr 9, 2015 at 13:36 | comment | added | Jbr | @Buscar웃 I am not sure it is the GPU card. Based on the fourth LED turning off it could also be the LCD panel. | |
Apr 9, 2015 at 13:33 | comment | added | Jbr | I have already reapplied the thermal paste and it made no difference. The dust is also completely blown out. | |
Apr 5, 2015 at 10:29 | comment | added | Tetsujin | Cheapest start would be change the thermal paste anyway - getting inside that far would also mean you can check all the heat-sink fins for hidden bunnies; then make sure the GPU fans are actually doing their job & spinning up correctly. I have no clue what the graphics card on that machine looks like but dust bunnies do like to accumulate in the most difficult to reach places & if it's anything like my HD 5770 then the only way to really get at them is to strip the card, which necessitates disassembly of GPU & heat-sink & therefore new paste. | |
Apr 5, 2015 at 4:53 | comment | added | Ruskes | Since you already know it is the GPU card, what is the question than. | |
Apr 5, 2015 at 2:28 | review | First posts | |||
Apr 5, 2015 at 6:01 | |||||
Apr 5, 2015 at 2:24 | history | asked | Jbr | CC BY-SA 3.0 |