1
vote
1answer
21 views

How to automatically mount airport connected hard drive as read only for a user account

I have an external hard drive connected to my airport extreme. I am able to access the drive without any problems. However, I have user accounts set up for my two young children. I want to give access ...
2
votes
1answer
22 views

How to allow port 80? (NAT)

I want to allow traffic to flow from the Internet to my Raspberry Pi, the IP address of the Pi needs to look as though it is from the router (NAT). The ports that need to be allowed through are port ...
0
votes
0answers
25 views

Can an Airport Express extend a non-Apple wifi network, wirelessly?

Can I use an Airport Express to extend my wifi network if my current wifi network doesn't have any other Apple access points on it. I wish to extend wirelessly, without a wired connection between the ...
2
votes
0answers
33 views

Adding a third Airport Express causes dramatic network slow down

When TWO AirPort Express are on everything works as expected, strong and fast wifi everywhere, music streams fine. But when a THIRD AirPort Express is on, the wifi slows down to about 100k/s This is ...
3
votes
1answer
59 views

If I connect an Ethernet cable, will my Mac automatically select the fastest route for local network traffic?

Background I have a fairly robust network setup at home, but am a little unclear on internal Mac networking. My LAN consists of two bridged AirPort Extremes and a cable modem. Everything is connected ...
1
vote
1answer
49 views

Mac keeps searching for networks even when it's already connected to a network

My 2013 MacBook Air keeps searching for networks when it is already connected the to internet. This is causing unstable connections which slows down my speed. Is there a remedy for this problem?
0
votes
0answers
46 views

Why is my Airport Express so much slower than ethernet?

I'm using the dual-band Airport Express and seeing download speeds of at least 50% that of an ethernet connection. I get ~120 Mbps down at peak with ethernet; usually I'll see a peak down of ~70 Mbps ...
1
vote
0answers
101 views

MacBook Pro issue with local IP download over wifi

I am facing a strange situation on my MacBook Pro. I'm serving a file via http (whatever server I use, I get the same problem: apache, node.js, ...): [http://localhost:8080/myFile] with my wifi ...
0
votes
1answer
37 views

mid-2011 MBA: sluggish wifi on WPA/WPA2 networks

Machine specs: Mid-2011 MacBook Air with a 1.8 GHz Intel Core i7 processor, and 4 GB DDR ram, Intel HD Graphics 3000 384 MB, OS 10.9.2 (Mavericks). Wifi connection is sluggish with multiple ISPs on ...
5
votes
2answers
220 views

How to show that my Internet connection is still up and active in menu bar?

I am looking for a solution to have the AirPort WiFi or other icon in the menu bar show when an active Internet connection is established. I live in a funky WiFi connection area and connect true a ...
1
vote
0answers
284 views

Wifi trouble since 10.9.2 update

Since I updated my system from 10.9.1 to 10.9.2, I now have a very annoying WiFi issue : when I click on the airport icon on the top bar, the WiFi networks are no longueur scanned and I sometimes ...
3
votes
2answers
519 views

Why does my Mac take a long time (30+ seconds) to find my home wifi?

I have a retina MacBook Pro 15" running Mac OS X 10.9.1. When I wake it from sleep at work, it's connected to the wifi network before I've even entered my password. But at home, with a Airport Extreme ...
2
votes
1answer
52 views

During a Time Capsule 35 Pass Erase, do I have to keep my computer on / running?

Back Story: Okay, so I just upgrade my Time Capsule from a 2 TB (802.11n) to a 3 TB (802.11ac). Yay! However, after transferring over all my files, I needed to erase my old Time Capsule Partition. I ...
1
vote
1answer
377 views

Can't see A1084 AirPort Express behind A1354 AirPort Extreme

Can anyone please make any suggestions...? (Preferably, step by step instructions to resolve this issue). I am using AirPort Utility 6.3.2 on a MacBook Pro running MacOS X 10.9.1 Mavericks. AirPort ...
1
vote
0answers
85 views

How do I capture the log output from Airport Utility?

I'm using Airport Utility 5.6.1 on Mavericks (installed from links here). I'm trying to figure out how the Advanced > Syslog Destination Address setting works... What kind of value is that field ...
1
vote
1answer
55 views

How to track down why Wi-Fi random disconnects on one particular network?

See comment in accepted answer for the likely problem source. I'm using my laptop (an early 2013 Retina MacBook Pro running OS 10.9.1) on a campus network. I have had random disconnection issues ...
0
votes
1answer
68 views

Two local networks: routing confusion

On my 17" MBP (running Mavericks) I'm sometimes signed on to two different LANs, one with my AirPort interface and one with Ethernet. My Networks are set up (in the Network System Preference Panel) ...
0
votes
0answers
23 views

AirPort Extreme network drive only uses the free space

I'm trying to expand my network by attaching a hard drive to my AirPort Extreme. The whole setup works and the drive is accessible by any computer connected to the WiFi, but for some reason, the ...
1
vote
1answer
396 views

How to use 2009-era Airport Extreme in Bridge Mode Wifi

I have a 2009-era Airport Extreme that used to provide routing and WiFi for our cablemodem. Time Warner updated our cablemodem to a DG860, which comes with its own built-in WiFi. I'd like to ...
0
votes
1answer
39 views

Do all Airport Express generations support client mode + Airplay?

I basically want to achieve what is explained in this question/answer. I have an existing, non-apple WiFi network and I want to use an Airport Express to be able to play music from my MacBook Pro ...
1
vote
0answers
53 views

Fast screen sharing

Ok, so, I want to buy a Mac Mini with OS X server. I want to run it without any monitor, or keyboards, or mouse. Now, I want to control it remotely from my MacBook via Screen Sharing. Since I have ...
0
votes
0answers
290 views

AirPort Extreme 802.11ac Performance Issues

I'm running an 802.11ac wireless network using three AirPort Extreme base stations. While setting these fellas up is very simple and straightforward, I've been running into several issues... APE A ...
1
vote
0answers
173 views

How to set up an AirPort Express so another router can connect to it?

I have an Airport Express 802.11n 1st generation (in other words, the last one before they began to look like a white AppleTV). I would like to have this as my main router and have a second router ...
2
votes
1answer
1k views

Airport Router DHCP Client Identification

I have a 3rd Gen Airport Extreme (802.11n 3rd Gen Dual band) as my main router. Attached to it are an Airport Express (802.11n 1st Gen Single Band) which is connected by and extends WiFi over it's ...
1
vote
1answer
97 views

Is there a way to log outbound HTTP requests that pass through my Airport Extreme?

My wireless router is an Airport Extreme. I would like to log all outbound HTTP requests (leaving my Mac for an internet web server) for later review. Is that possible?
2
votes
0answers
47 views

How can I tell if I need to upgrade/replace Macbook 07 Airport card?

I bought a used Macbook (late 07 model, white, 2.1 Intel Core Duo, 3 gig RAM) and I have been upgrading everything I can. It works great EXCEPT the airport card. The wireless internet is so slow! When ...
0
votes
1answer
297 views

How to add the Time Capsule to an existing network, in Ethernet?

I have just received my new Time Capsule. I don’t want to create a new AirPort network, I already have one. I want to connect the Time Capsule to my existing network, in Ethernet. I plan to plug the ...
1
vote
1answer
351 views

Time Capsule and Thomson modem/router

Just got a new airport time capsule (2013 model). The time capsule is put in bridge mode and the modem/router from my ISP (thomson 585 v8) is doing the router stuff (dhcp, nat). Time capsule is ...
0
votes
1answer
121 views

JBL Soundfly Air with multi-router AirPort Express WiFi

I got my hands on a JBL Soundfly, but it shows some trouble when I connect it to my home WiFi, which consists of 2 first generation AirPort Express linked by a cable to create a shared network. The ...
0
votes
2answers
412 views

How to disconnect iPhone from WIFI without 'forgetting' it?

My internet connection died whilst my router still continued to work (so I could still pick up wifi but had no internet connection). I wanted to tether my laptop to my phone so I could use 4G instead, ...
0
votes
1answer
253 views

How to connect to a specific BSSID via Terminal?

My internet provider has a service where I share part of my wifi connection with other subscribers and in return I can use their wifi connection when I'm close to a subscribers router. It's very ...
1
vote
1answer
57 views

Do the wi-fi communications from Mac to Mac travel through the access point?

Let’s put two Macs MAC1 and MAC2 on the same table. They are connected to the same AirPort (wi-fi) network. They are connected to the access point AP, which is far away, at 10 meters. The Macs are ...
2
votes
2answers
339 views

Airport Extreme mesh network over Ethernet

I have purchased three Airport Extreme routers. I have a cable modem in one room that currently feeds into our primary router (which I want to replace with an Extreme), which feeds into a switch, ...
0
votes
0answers
562 views

MacBook Pro 2007 Airport not working anymore in Mavericks

I recently updated from OS X 10.6 to Mavericks and while all other things work fine, I get the infamous "wifi: hardware not installed" message when clicking on the Airport icon. I have since done a ...
0
votes
1answer
174 views

AirPort Utility not showing AirPort nodes, which ARE there, and I AM using them

Today neither of the AirPorts show up in the AirPort Utility. I know the hubs are there, that's how I'm accessing the Internet. They appear with the yellow caution indicator /!\ and when I click ...
0
votes
0answers
1k views

Setting Up Port Forwarding For Foscam Camera With Apple Airport Extreme

I am trying to setup a Foscam FI8189W IP Camera to work with my Airport wifi network. I have tried to follow the instructions that Foscam has given but I believe the problem is with my Airport setup. ...
3
votes
1answer
995 views

Consistently slow and unreliable Wi-Fi everywhere I go. 2012 MBP

I have a mid-2012 MacBook Pro. (13-inch, 8gb memory.) I work remotely and spend a lot of time working from coffee shops and other places with public Wi-fi. Lately - for a couple of months now - I've ...
1
vote
1answer
160 views

How many clients does the airport express support when bridging (ProxySTA)?

The airport express is said to support 50 users, yet in my case (when bridging WiFi to ethernet) it only serves up to 4 clients on the LAN port. A fifth client is not able to obtain an IP address nor ...
2
votes
1answer
69 views

How to change which Aiport Express a MBP is connected to?

So I have a Time Capsule which creates my wireless network, and I have an airport express which extends the network. However, when I open Airport Utility, it says that my Macbook Pro is connected to ...
0
votes
1answer
174 views

MacBook keeps connecting to guest network (Airport)

Every time I open my MacBook Pro (restart or from sleep) it is always connected to my Guest Network. I have to manually connect to my regular network in order to access my other apple devices and use ...
0
votes
1answer
441 views

How to diagnose connection timeouts when connecting to a WiFi hotspot

I am having difficulty troubleshooting this error message: I don't get any indication any details about the failed connection attempt. How can I diagnose such timeouts and resolve the connection ...
2
votes
1answer
7k views

Extend wireless network from DSL router with Airport Express

This is what I want to do: ISP's DSL router (LAN port) <-- ethernet cable --> (WAN port) Airport Express (I know it's not possible to extend non Apple WiFi points wirelessly, so I need the ...
0
votes
1answer
199 views

What could be causing my MacBook Air 13inch (Mid 2012) 2 GHz Intel Core i7 OS X 10.8.4 to throw the “could not join” WiFi error?

For some reason, my MacBook Air 13inch (Mid 2012) 2 GHz Intel Core i7 OS X 10.8.4 will fail to connect to my Siemens SE567 ADSL Modem when WiFi security is enabled on it. It throws the following error ...
1
vote
1answer
662 views

Why does my iPhone 4S disconnect from WiFi randomly?

I have an iPhone 4S running iOS 6.1.3, and I'm currently experiencing a problem with my device. It connects to my wireless network for a while and sometime later it disconnects. When i try to ...
2
votes
1answer
2k views

Can I put an Airport Extreme in client mode (sharing printer only)?

I have an Airport Extreme 3rd gen (A1301). I just bought a Time Capsule 5th gen (A1470). I put the TC where the AE used to be, in a cupboard in the hall. Now I am thinking to repurpose the AE as a ...
1
vote
0answers
219 views

iPhone 5/iPad 3/4 Failing to Renew DHCP Lease

I just setup a Airport Extreme gen 6 (f/w 7.7.1). On it I have several Apple devices including two iPhone 5s, iPad 3, and iPad 4 all on iOS 6.1.4. I am able to open web pages through Safari on all ...
0
votes
1answer
231 views

Slow network copy between iMac and MacBook Air

I am getting a maximum lousy 1,5 MB copy speed between two Macs on my local network. My hardware is: iMac6,1 (2006) AirPort Express A1264 (2008) MacBook Air3,2 (2010) The AirPort and the MacBook ...
4
votes
3answers
215 views

Do all computers/devices connected to an airport extreme run at the same speed?

My mom just bought an Airport Extreme router recently, and she said the salesperson at the Apple Store told her that all devices on a network run at the same connection speed, and that speed is ...
0
votes
1answer
533 views

restarting a airport from the commandline - of a non-mac

We have a few airport's and an airport express here at my work, and I would like to bring them into my Nagios monitoring more closely. Right now they are only being monitored by ping. I would very ...
1
vote
0answers
204 views

Wireless Extended Network segmentation problem using 2 802.11ac Airport Extremes

I have a "Wireless Extended Network" using two of the latest 802.11ac Airport Extremes. This works very well with one bothersome and perplexing exception. Wireless clients can't seem to talk to ...