Software providing hardware virtualization for Macintosh computers with Intel processors.

learn more… | top users | synonyms (1)

0
votes
1answer
18 views

Is there a way to connect to office VPN using parallels (windows) but surf on host Mac OS X?

My office VPN called Juniper does not gets installed on Mac OS X. I am using Parallels to run guest Windows on my macbook pro with OS X Yosemite. I don't know what I am asking, and if it is even ...
0
votes
2answers
25 views

Why NTFS write softwares cause some certain problems?

After installing NTFS write software on my mac, I found two problems. The Windows system in bootcamp does not show in the startup disk in Settings app. Parallels Desktop can't suspend the Bootcamp ...
5
votes
6answers
15k views

iMac with 8GB RAM — memory always almost full

I have a 27'' iMac (Late 2012, OS X 10.9.2) with 8GB RAM. The usage of memory is always above 7GB, even though I don't think I am running that much stuff. This leads to the occasional hanging of a ...
0
votes
1answer
38 views

Parallels vs VMWare for Mac

I use Parallels on my iMac and Macbook Pro. It seems to run fine on my iMac but kind of causes my MBP to become a little sluggish and fans to get pegged. I was speaking with someone that runs ...
0
votes
2answers
34 views

Yosemite and Parallels

I was wondering if adding more RAM would help the stalls and poor performance of a mid-2011 iMac. It was working great until I upgraded to Yosemite and the newer Parallels.
0
votes
1answer
11 views

Multi-monitor virtualisation with Parallels

Is it possible to make a Windows 8.1 VM running on Parallels think it has two monitors but in reality these monitors are just two separate "desktops" as far as OSX is concerned running on a single ...
0
votes
1answer
82 views

Does Fusion (VMware) support 2D graphics hardware acceleration for Yosemite guest OS?

I am disappointed to learn that the Parallels 10 (and earlier) does not support hardware accelerated 2D (nor 3D) graphics when Mac OS X is the guest OS. This means Yosemite inside Parallels runs ...
1
vote
2answers
571 views

Alter cmd-tab behaviour on OSX to group Parallels applications?

When running a Parallels virtual machine (i.e. Windows 7), cmd-tab behaves as the Parallels icon showing the list of virtual machines (which can be closed) and a separate icon for each open Windows ...
2
votes
2answers
72 views

OS X Lion Virtual Machine on Yosemite?

I have a Mid-2014 MacBook Pro (Retina), running OS X Yosemite. I would like to run OS X Lion within a virtual machine. Is this setup supported by Parallels/VirtualBox/VMware, even though this MacBook ...
1
vote
1answer
457 views

Can a Parallels VM be salvaged from a recovered .hds file (200gb file)?

The computer got hosed & we lost the .pvm file, then the Time Machine Backup drive was involved in a car crash! I know the .pvm file is a package with multiple files inside, but I've looked thru ...
5
votes
2answers
2k views

How many CPUs can be assigned to a Parallels Desktop VM?

I have an iMac with the quad core i7 CPU which shows up in Mac OS X as an eight core CPU (thanks to Hyper Threading, I think). Parallels Desktop allows me to assign 1-8 cores to the Windows VM that ...
1
vote
1answer
90 views

Does Parallels 10 fix the Fn keys issue?

In order to use the Fn Keys on Windows VMs with Parallels 9 you have to set them as standard function keys on Mac OS, which requires you the press the Fn key to access the special functions ...
1
vote
0answers
103 views

Parallels Desktop for Mac: Stuck on “Preparing to configure your virtual machine…”

I bought and installed Parallels Desktop on my Mac. I installed Parallels Transporter Agent on my Windows machine that runs Windows 7. I migrated my windows machine to my Mac, took about 36 hours. I ...
1
vote
0answers
52 views

Problem reinstalling PostgreSQL after installing Parallels

I’m trying to reinstall postgresql on my mac (yosemite) after installing parallels seemed to mess up permissions to directories that psql and homebrew need. I was able to force-uninstall psql, but ...
2
votes
6answers
21k views

Installing Windows 7 on Mac. A required CD/DVD drive device driver is missing

I'm installing Windows 7 on my Mac via Parallels. During installation I'm getting. "A required CD/DVD drive device driver is missing." message. Doesn't give me any option to proceed further. What am ...
4
votes
1answer
575 views

How does Parallels' CPU and ram usage work? When to shutdown virtual machine?

I run Windows 7 using Parallels in host operating system OSX. I have it configured to use 2GM ram and 2 cores on a Retina MacBook Pro with 8GB ram. I'm curious under what conditions I will experience ...
2
votes
1answer
14 views

How to disable line break conversion in Parallels Desktop?

When copying text between a Windows client and the OSX host Parallels converts line endings, which is a big nuisance. Can this be disabled?
6
votes
5answers
17k views

Parallels window problem

I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!! The picture above is when I open up my chrome, how can I fix it?
2
votes
1answer
317 views

How to get Cmd-Tab (Mapped to Alt-Tab) in a Parallels Windows VM to cycle just Windows Apps?

I have a Windows VM running in Parallels and is working just fine. I have mapped Apple-⌘ Cmd key to Windows-Alt and Apple-⌥ Opt to Windows-⊞ Win. When I press ⌘ Cmd-Tab - even in full screen mode - I ...
0
votes
1answer
260 views

steam and Parallels Desktop 10?

I am planning on buying a Macbook Pro and Parallels Desktop 10, but I also love PC video games and I want to know if anyone knows how/if Steam games can run easily through Parallels Desktop. Also if ...
5
votes
4answers
3k views

Using Time Machine with Virtualization (Parallels, VirtualBox, VMWare, etc…)

Since a single small change to a VM file should (I think) cause the entire multi-gigabyte file to be backed up again, are there any ideas I can use to more effectively backup my machine? Assume that ...
4
votes
1answer
578 views

How to start to recovery mode in a Mac OS X VM in Parallels?

Is it possible to start into Recovery/Internet recovery mode in a virtualized Mac OS X in Parallels? It would come in handy to take screenshots of those UIs or running apps to exemplify some steps ...
-1
votes
1answer
27 views

shutdown or suspend in parallels

I use Windows 8.1 in Parallels. Daily in evening for 5 hours, I open my C++ primer book (PDF) and code in Visual Studio. I feel little lazy in closing the book and Visual Studio everyday. Should I ...
0
votes
0answers
51 views

Headphones, MacBook Pro, Parallels and no sound on the headphones

I have Parallels installed on my MacBook Pro. I have a headset plugged in. There is no option to choose to play sound on the headset. My options are Internal Speakers and Internal Sound or ...
0
votes
1answer
172 views

AntiVirus for Mac running parallels

I'm using OS X 10.10.1 on my Mac. I use Parallels Desktop 10 and VMware Fusion 7.1. I do use windows a lot on Parallels and Fusion (Several Virtual machines). Windows 8.1,7 and XP. I've installed ...
0
votes
0answers
81 views

Networking issues over Parallels 9 with OS X Yosemite

I'm trying to use parallels 9 to use windows 8 and whenever I open up my VM, I am no longer able to connect to use the Internet in OS X. I don't have this problem on my iMac that is connected via ...
0
votes
1answer
109 views

Can't open PDF's in Outlook using Parallels 8 vm

All of the sudden, I am not able to open PDF's that are attached to emails, UNLESS I save/copy them to different location. Once I save it/copy it or drag it from the email to my OSX 10.8.5 Desktop, ...
0
votes
1answer
80 views

How to suspend a virtual machine using AppleScript (when hibernating the Mac)?

I need an application, which will: Activate Parallels Desktop While holding Opt, select 'Actions > Suspend' Activate SmartSleep Minimize SmartSleep Click 'Hibernate' of menu item 'QuickSleep' of ...
0
votes
1answer
135 views

Parallels: Make windows can select Wi-Fi hot spot

I'm using Parallels for running windows 8. My question is: In windows 8, the network icon always shows ethernet although I have selected Wi-Fi network in the settings. If my mac is connected to ...
1
vote
0answers
136 views

Running OS X as a guest on Retina Macbook pro

I installed OS X 10.9 Mavericks on Parallels Desktop 10. and I installed Parallels Tools and gave 2 Cores, 2GB RAM and 384MB to that VM. But It's only showing 256MB VRAM on the About Mac section. and ...
0
votes
1answer
467 views

Install bootcamp with my parallels partition

I've been using parallels for a while and I want to use that partition for bootcamp. I've read about doing it the other way, using bootcamp in parallels but not from parallels -> bootcamp. How do I do ...
0
votes
1answer
84 views

Can one use Apple's Bootcamp drivers on a Parallels VM?

So this just occurred to me: What if I installed Windows as a Parallels VM and used bootcamps drivers instead of the parallels drivers, would this work? Something tells me it won't, and that this is ...
4
votes
4answers
592 views

2006 MacPro - Worth upgrading for use as a VM host?

I have a MacPro 1,1 bought in early 2007. Earlier this year I was about to recycle it but tried installing an SSD as a boot/apps drive. It has been a great success, it now feels like a new machine and ...
1
vote
2answers
712 views

Windows on Parallels 10 with 2 out of 3 monitors only

I've MacBook Pro with 2 external monitors connected. Is there a way to configure Parallels so that it allows you to use 2 monitors for Windows and the main one for Mac? I only found option to make it ...
2
votes
1answer
88 views

Isolate Mac & Windows sharing parallels

I am using parallel desktop. Before I installed parallels drivers both were isolated. Now all my folders are shared with Mac and Windows mutually. I can't simply uninstall the drivers because drivers ...
0
votes
0answers
282 views

How to install drivers in parallel desktop

First of all help me to get bootcamp drivers for my MacBook pro retina 15 inch version. They include all the drivers in that pack. I have downloaded bootcamp drivers twice and every time they don't ...
3
votes
1answer
619 views

How to execute a Parallels Windows application with command line parameters from Mac?

I am trying to call Beyond Compare Windows app to perform a file compre directly from Mac but I am block with command line argument passing. You can call Windows applications from the OS X command ...
2
votes
1answer
4k views

What does “sudo nvram boot-args=”debug=0x10“” do to my Mac?

Because Parallels Desktop 10 and Fusion 7 both run slow on Yosemite, there are KB articles which make the users execute sudo nvram boot-args="debug=0x10" For instance here: ...
2
votes
1answer
83 views

Parallels: Make sure VMs never start automatically at program startup

If I quit Parallels when there are virtual machines running, then these machines are automatically started the next time I start Parallels. Is there any way to make sure that Parallels never ...
1
vote
1answer
1k views

How to Install and Run Yosemite in Parallels?

I'm not ready to commit to Yosemite yet as my primary OS. So I thought I'd load up a Parallels VM to try it out. Although Parallels seems to create the Yosemite .dmg file correctly, it just won't ...
0
votes
0answers
106 views

Copy to Parallels folder not working

Getting hang problems when copying files from OS X to a mounted Windows 8.1 folder. Sometimes copy commands like cp -R sourceFolder/ /Volumes/C/TestFolder just hangs in the middle after having ...
1
vote
2answers
117 views

OSX 10.X App Compatibility Legality - Parallels [closed]

I've been a very long time Windows user and software engineer and last year I bought my first MacBook Pro. One of the issues I've been genuinely shocked by is the questions around application ...
1
vote
0answers
230 views

Can Parallels use NVIDIA GeForce GT 750M indirectly?

I'd like to run windows 7 via Parallels using a new 15-inch MacBook Pros with Retina display. Now, I am considering spending extra on the model with a dedicated graphics card: (NVIDIA GeForce GT 750M ...
0
votes
1answer
91 views

excel files look different on OSX Desktop w/Parallels

I have two Excel files on my OSX Desktop. One is an alias and it has the double red lines/logo of Parallels, the other does not. See attached screen shot. Can anyone tell me why this occurs? I don't ...
0
votes
0answers
87 views

Can't access the Guest port 7001 from Host on a different network

My Parallels Desktop 10 network configuration is set on Bridged network ->default adapter. I am trying to access a windows 7 guest OS from my Macbook Pro on Mav 10.9.4. The weird part of the issue is ...
0
votes
0answers
173 views

Windows 8.1 OEM (System Builder) Boot Camp + Parallels

Will I be able to activate Windows 8.1 System Builder/OEM both in Boot Camp and in Parallels Desktop? I understand this is possible with previous Windows versions by activating once online and once by ...
0
votes
0answers
19 views

Parallels app starts from hotkey - not wanted

I have an annoying situation where some key combination, not even sure which, starts up an app in a Parallels VM running Windows, Parallels build 8.0.18619. The app is Chrome. Normally the VM in ...
2
votes
0answers
68 views

Running parallels with Bootcamp image, getting validation/“Genuine” errors

I'm running Windows 7 on bootcamp on my mid-2009 MBP. I've been doing this for a few years now, originally on Parallels 6 and now on 9. I'm on Mavericks on the Mac side. When I upgraded to 9 (to ...
1
vote
2answers
388 views

Keyboard shortcut mapping for Ctrl+Alt+Del in Parallels

I'm a Windows user with a Windows-oriented keyboard, and I switched the Command and Ctrl keys in OSX, because I want to use the same keyboard shortcuts whether in Windows or OSX. This came back to ...
0
votes
1answer
125 views

Migrating parallels PVM from Mac to Windows

I have a Linux image (Parallels v9 PVM file) on my MBP, which I would like to migrate to Windows (to clarify: so that the Linux image can be launched from Windows, instead of from Mac). Is this ...