0
votes
1answer
44 views

How to create your own wifi network in mac without internet cable

I want to create a network in my room with my mac. I have low wifi signal in my room and my ipad cannot detect it but my mac can. However, I am using a retina mac and thus cannot connect the ethernet ...
1
vote
1answer
31 views

Failing to connect to WiFi network with MacAuthEvent error

I'm unable to connect to any WiFi network. When attempting to connect, before the popup prompting me to run network diagnostics, the console shows the following in the logs: 7/14/14 8:52:06.000 AM ...
0
votes
0answers
30 views

Setting up a private network with macs

I want to run 12 imacs through a network. And also have wifi available for people to use their own devices. At the moment I have the modem connected to the VPN box, then the vpn box connected to the ...
0
votes
0answers
24 views

Issues Setting Up Airport Express to Extend Network

I have tried to set up my WLAN with the following topology: Cable modem providing Internet connectivity Airport Extreme as the primary access point Airport Express as a repeater (to extend my ...
0
votes
0answers
60 views

OS X, connection drop downs, socket closed prematurely, mDNS

I have big problem with my OS X Mavericks Wi-Fi connection. I have tried calling my ISP (now we have stronger AP antenna), NVRAM reset, OS X reinstall, run own DNS local with dnsmasq, manually set IP ...
0
votes
0answers
22 views

AirPort Extreme Refusing Internet Connection to Windows Clients

I have an AirPort Extreme (3rd generation) acting as the router in the house. Unlike the Actiontec router that it replaced, Windows 7 (but not XP) computers connected to the LAN in various ways, ...
0
votes
0answers
22 views

ssh without Safari streaming: “Write failed: Broken pipe”

I use the standard ssh binary on OS X 10.9 on a mid-2013 MacBook Air 11". It looks like OS X goes into some kind of sleep mode all the time, and when I wake it up a dozen of minutes afterwards, I ...
0
votes
1answer
79 views

Since the newest Airport Extreme routers don't support SNMP, how can I monitor bandwidth usage on my network?

I am currently using about 600gb a month and Comcast is about to start charging me for anything over 300gb. I need to find out which devices are using the most bandwidth so I can get it under control. ...
0
votes
1answer
36 views

Macbook connects to modem, internet works, but modem -> router, no internet

I'm running a netgear modem CG3000D, and have been able to access internet without problems. However my speeds on the internet were slow for gaming and extensive usage, so I purchased a netgear R6250 ...
0
votes
1answer
47 views

Set Static IP Reservations on AirPort Extreme

I am new to this, but I set up a little server for something up on a laptop connected to the Ethernet of the airport express. I had the server down for a few months and when I plugged it back in, I ...
1
vote
1answer
46 views

Interstitial screen/marketing layer on Airport guest wifi

Is there a way I can add an interstitial screen when a user first logs in to my Airport Extreme's guest network whereby I can make a marketing ask (like, "Like us on Facebook!") and require them to ...
0
votes
1answer
28 views

Network service inactive/Unable to add Wi-Fi network on mac pro

I have no idea what happened but my Wi-fi network has disappeared completely! The Wi-fi icon found on the top menu bar is gone. I'm unable to create a new Wi-fi network service but only able to ...
0
votes
1answer
55 views

How to configure mac book pro to act as an Access Point (and not a router)?

I am connected to internet via ethernet cable on my MBP laptop. I want to have access to internet wirelessly on my iPad as well. How can I config my MBP (OSX 10.6.8) to act as an "Access Point" ? I ...
2
votes
1answer
122 views

Configured Airport as Bridge and use OS X Server for DHCP and DNS, no Internet

I want to use my Mac Mini as an OS X Server with the following services: DNS DHCP Open Directory Profile Manager I configured my Airport Extreme under the "Internet" tab to use my static IP ...
0
votes
1answer
119 views

packet forwarding on OSX mavericks

My MacBookAir(Mavericks 10.9.2) need to share my internet connection(wi-fi;en0) with BeagleBoneBlack(BBB) which are in 192.168.7.0 subnet over en6 interface. ifconfig $ ifconfig lo0: ...
1
vote
1answer
36 views

MacBook not able to connect to IRC server over Airport

I have a MacBook Air connected to an Airport Express and I am trying to connect to an IRC server. I am able to connect to the IRC server down the street at the cafe. I am able to connect to the IRC ...
4
votes
2answers
392 views

AirPort Express and Extreme Wi-Fi strength comparison

I'm about to buy an AirPort model but I'm not sure if there is any difference in terms of signal strength and range. There have been comparisons between these two models in the past but I don't think ...
1
vote
1answer
222 views

How do I set up IPv6 on my Airport Extreme?

I am trying to set up IPv6 on my Airport Extreme. According to AT&T / BellSouth, my network is IPv6 ready. Network Setup I currently have two parts to my network setup. Westell Model 6200 ...
0
votes
1answer
46 views

Is it unsafe to put router into “DHCP and NAT” mode?

When I was trying to get my Raspberry Pi online, in airport utility I put my router in DHCP and NAT mode and entered ports (80). Did I open up these ports to the internet? Would this be unsafe to do? ...
1
vote
0answers
42 views

OS X Server File Sharing - Airport Extreme Disk via VPN

I have a 3 TB disk mounted on my Airport Extreme, which I can access locally just fine. However, I would like to be able to mount it over VPN outside of my network. I am able to do so with any drives ...
0
votes
1answer
121 views

Mac mini with intermittent wifi connnectivity problems

Mac mini (2.4 core 2 duo, 10.6.8) has served well for years. Now it seems to be having wifi connectivity problems with no rhyme or reason to their appearance. Several other devices (laptops, phones) ...
1
vote
1answer
71 views

How to automatically mount airport connected hard drive as read only for a user account

I have an external hard drive connected to my airport extreme. I am able to access the drive without any problems. However, I have user accounts set up for my two young children. I want to give access ...
2
votes
1answer
72 views

How to allow port 80? (NAT)

I want to allow traffic to flow from the Internet to my Raspberry Pi, the IP address of the Pi needs to look as though it is from the router (NAT). The ports that need to be allowed through are port ...
2
votes
0answers
119 views

Adding a third Airport Express causes dramatic network slow down

When TWO AirPort Express are on everything works as expected, strong and fast wifi everywhere, music streams fine. But when a THIRD AirPort Express is on, the wifi slows down to about 100k/s This is ...
3
votes
1answer
241 views

If I connect an Ethernet cable, will my Mac automatically select the fastest route for local network traffic?

Background I have a fairly robust network setup at home, but am a little unclear on internal Mac networking. My LAN consists of two bridged AirPort Extremes and a cable modem. Everything is connected ...
0
votes
0answers
134 views

Setting up CrashPlan with NAS drive attached to Airport Extreme?

I have one of the new (well it's not so new anymore) Airport Extremes with ac wireless. I am using Crashplan to back up my data online, but I also want a more local backup -- so I would like to hook ...
1
vote
1answer
163 views

Mac keeps searching for networks even when it's already connected to a network

My 2013 MacBook Air keeps searching for networks when it is already connected the to internet. This is causing unstable connections which slows down my speed. Is there a remedy for this problem?
0
votes
0answers
71 views

Why is my Airport Express so much slower than ethernet?

I'm using the dual-band Airport Express and seeing download speeds of at least 50% that of an ethernet connection. I get ~120 Mbps down at peak with ethernet; usually I'll see a peak down of ~70 Mbps ...
0
votes
1answer
54 views

mid-2011 MBA: sluggish wifi on WPA/WPA2 networks

Machine specs: Mid-2011 MacBook Air with a 1.8 GHz Intel Core i7 processor, and 4 GB DDR ram, Intel HD Graphics 3000 384 MB, OS 10.9.2 (Mavericks). Wifi connection is sluggish with multiple ISPs on ...
0
votes
1answer
126 views

Filezilla Explicit FTP over TLS not working with Airport Extreme

There is a security certificate exchange that occurs at the start of the connection process which doesn't seem to work when the Airport Extreme is used as the Internet access point. When I switch to ...
1
vote
0answers
35 views

Maximum number of Airport Expresses/Home Audio Distribution Network

I'm trying to set up a 6-zone home music distribution system using 6 AE's, each one being connected to a number of speakers thru multi-channel distribution amps. All would be located in my central ...
1
vote
1answer
392 views

Configure Airport to routers DMZ IP

I have a router connected to the Internet. I have connected my Airport Extreme to this router. I know this is receiving the message (Double NAT). Since I want to receive all traffic on my Airport, I ...
1
vote
1answer
139 views

How do I route internet through local PPP connection I have on PTY terminal?

I'm doing this hack job where I have routed a cell phone's GPRS modem over to a local PTY. The proprietary debug software actually routes the modem over TCP, I then use socat to route it to a PTY ...
0
votes
1answer
422 views

Very slow screen refresh on server screen share

I have a brand new Mac Mini, configured with Intel i7, 16GB, dual SSDs... basically the top of the line Mac Mini you can buy as of 2/1/2014. I also purchased the latest Airport Extreme, with 802.11ac ...
1
vote
1answer
943 views

Can't see A1084 AirPort Express behind A1354 AirPort Extreme

Can anyone please make any suggestions...? (Preferably, step by step instructions to resolve this issue). I am using AirPort Utility 6.3.2 on a MacBook Pro running MacOS X 10.9.1 Mavericks. AirPort ...
1
vote
1answer
78 views

How to track down why Wi-Fi random disconnects on one particular network?

See comment in accepted answer for the likely problem source. I'm using my laptop (an early 2013 Retina MacBook Pro running OS 10.9.1) on a campus network. I have had random disconnection issues ...
0
votes
1answer
98 views

Two local networks: routing confusion

On my 17" MBP (running Mavericks) I'm sometimes signed on to two different LANs, one with my AirPort interface and one with Ethernet. My Networks are set up (in the Network System Preference Panel) ...
0
votes
0answers
31 views

AirPort Extreme network drive only uses the free space

I'm trying to expand my network by attaching a hard drive to my AirPort Extreme. The whole setup works and the drive is accessible by any computer connected to the WiFi, but for some reason, the ...
0
votes
2answers
140 views

ntpd unable to create socket on en1

I see lots of errors in system.log from ntpd attempts to create ipv6 sockets, running OS X 10.9.1. I have only wireless, so why is the iMac attempting to use en1? E.g. unable to create socket on en1 ...
1
vote
1answer
950 views

How to use 2009-era Airport Extreme in Bridge Mode Wifi

I have a 2009-era Airport Extreme that used to provide routing and WiFi for our cablemodem. Time Warner updated our cablemodem to a DG860, which comes with its own built-in WiFi. I'd like to ...
2
votes
1answer
5k views

Extending a Time Capsule network with an AirPort Express connected by ethernet cable?

I'd like to extend my home wireless network to a location that is too far away for wireless to reach. My plan was to do this by running a 100m/328' length of Cat6a cable from my Time Capsule to an ...
1
vote
1answer
73 views

Fast screen sharing

Ok, so, I want to buy a Mac Mini with OS X server. I want to run it without any monitor, or keyboards, or mouse. Now, I want to control it remotely from my MacBook via Screen Sharing. Since I have ...
3
votes
2answers
3k views

Access disk attached to Airport Extreme over internet?

According to Apple's product page, the Airport Extreme... "...can turn your external USB hard drive into a secure drive you can share across your Wi‑Fi network and access securely over the ...
0
votes
0answers
370 views

AirPort Extreme 802.11ac Performance Issues

I'm running an 802.11ac wireless network using three AirPort Extreme base stations. While setting these fellas up is very simple and straightforward, I've been running into several issues... APE A ...
1
vote
0answers
196 views

How to set up an AirPort Express so another router can connect to it?

I have an Airport Express 802.11n 1st generation (in other words, the last one before they began to look like a white AppleTV). I would like to have this as my main router and have a second router ...
2
votes
2answers
2k views

Use different DNS servers for guest network on AirPort Extreme/Express

I have an AirPort Extreme and Express which provide a guest and a private wireless network. I also have a Mac server (192.168.1.10) running on the LAN. I want that server to be accessed only on the ...
2
votes
1answer
2k views

Airport Router DHCP Client Identification

I have a 3rd Gen Airport Extreme (802.11n 3rd Gen Dual band) as my main router. Attached to it are an Airport Express (802.11n 1st Gen Single Band) which is connected by and extends WiFi over it's ...
1
vote
1answer
80 views

Does an AirPort access point as bridge allow communication between Macs?

I am planning to make this network : ⎡ Internet modem ⎤ ⎡ AirPort ⎤ <--> [ PC ] ⎢ & ⎥ <--> ⎢ access point ⎥ ⎢ router ⎥ ...
0
votes
1answer
488 views

How to add the Time Capsule to an existing network, in Ethernet?

I have just received my new Time Capsule. I don’t want to create a new AirPort network, I already have one. I want to connect the Time Capsule to my existing network, in Ethernet. I plan to plug the ...
1
vote
1answer
489 views

Time Capsule and Thomson modem/router

Just got a new airport time capsule (2013 model). The time capsule is put in bridge mode and the modem/router from my ISP (thomson 585 v8) is doing the router stuff (dhcp, nat). Time capsule is ...