3
votes
1answer
220 views

New to Macbook Pro, need help upgrading

I was recently gifted an old Mid 2010 Macbook Pro with the following specs listed here: ...
1
vote
2answers
149 views

Issues putting a hard drive in the optical bay of my early 2011 MacBook Pro

I'm asking for help for my brother! I recently switched over to a dual hard-drive setup, and it worked perfectly. However, my brother is having issues. First off, here is the hard drive we are ...
0
votes
0answers
289 views

How is swap on mid-2013 MacBook Air w/ PCIe SSD?

There appears to be confusing and incomplete information about the PCIe SSDs in mid-2013 MacBook Air 11" and 13" (especially the 128GB models), where a different queue depth may result in different ...
0
votes
2answers
2k views

How fast is 256GB to 128GB on mid-2013 MacBook Air?

I've tried finding the comparison reviews of the performance differences between 128GB and 256GB PCIe SSDs of mid-2013 MacBook Air 11" and 13" (which now have been carried over as the ...
3
votes
2answers
880 views

Should I put the SSD in the Optical or Main Bay when replacing Optical Drive?

I have 2010 MBP. Wanted to put SSD in optical bay (and use it as main boot drive) because main bay has SMS (motion detection) that HDD would use. The only problem is that optical bay in my computer ...
0
votes
1answer
71 views

How do I make sure the firmware for my newly installed SSD is up to date for Mac OSX? Note: cannot use optical drive

Installed a 2nd HD (SSD) onto my 15" MBP and wasn't sure how to upgrade the firmware. SanDisk 120 GB SSD. Anyone know?
1
vote
0answers
186 views

Configuring SSD over-provisioning on Mac OSX

I'm in early investigation stages of adding a SSD drive to my MacPro. Fragmentation problems can lead to serious performance problems on an SSD. There are a couple answers to this problem: TRIM - ...
2
votes
1answer
200 views

Macbook freezes, disk errors, symptoms of SSD death?

Macbook freezes, system disk "disappears" from system, I get errors about reading/writing. Spinning ball of death appears on the screen, I am able to move pointer for a few seconds after first ...
0
votes
1answer
95 views

Identify disk manufacturer in Macbook Air

I wonder how can I know which is the disk's manufacturer for my Macbook Air. Is there a way to know whether the disk is one of those faulty SSD disk that Apple has recalled.
4
votes
2answers
3k views

Is there room for two drives in the 27" 2012 iMac?

I've looked around a bit, but can't find anybody saying whether there is room in the new slim iMac for an extra internal SSD. I used this tutorial about a year ago to add an additional SSD to my Mid ...
2
votes
0answers
175 views

OS X breaks if I apply HFS compression to the whole volume. What do I need to exclude?

OS X breaks if I apply HFS compression to the whole volume. (It won't boot.) What do I need to exclude? I've been able to compress large parts of it, but then I had to restore after I compressed ...
7
votes
3answers
8k views

How long will an Apple SSD last?

Like all tools, an SSD will wear out from use and eventually fail. Are there data on roughly how long the SSD's that Apple ships in it's portable line last? From my research, it seems that the ...
3
votes
2answers
4k views

MacBook SSD replacement — sudden motion shock sensor in optical bay?

When looking to upgrade a MacBook Pro with a solid state drive (SSD), one option is to: First, install the SSD instead of the spinning hard disk drive (HDD). Then, install the HDD instead of the ...
1
vote
1answer
459 views

SSD adapter for optical drive

I'm going to add a SSD drive to my macbook pro. I'm wondering if the optical drive adapter can have any influence on the disk speed, taking it down from a SATA III to a SATA II or I.
3
votes
2answers
3k views

What kind of SSD is compatible with the 2010 Unibody MacBook?

I'm considering buying a solid state drive for my Unibody White MacBook 2010. The trouble is, I have no idea what to look for. What kind of connector am I looking for? (SATA?) What size? I'm told to ...
2
votes
1answer
313 views

Old MacBook Air 3rd party SSD visibility is temperature dependent

1st gen MacBook Air.. I replaced the failing internal HD with an 3rd party SSD (wasn't hard, but replacing the fan which was also broken was much trickier - pro tip: don't try using a 00 screwdriver ...
0
votes
2answers
715 views

Advice and information for installing a SSD into MBP with fresh Lion

Tomorrow I am going to buy a OCZ Vertex 3 (240GB) and then I want to upgrade my MacBook Pro (late 2011) and install a fresh Lion system without copying any files with SuperDuper etc. Now I would like ...
0
votes
1answer
839 views

Solving a problem on a MacBook Pro 5,1 with an OCZ Agility 3 SSD

I installed Mac OS X lion on an SSD (through USB) after checking the firmware was the latest version (2.15). When I transferred the SSD into the MacBook Pro (like i usually do after an install) but it ...
0
votes
1answer
3k views

Disk Space requirement for Xcode on a Solid State Drive (SSD)

I have a question on the storage requirement for running Xcode and working on Application development. I am planning on upgrading my Macbook Hard disk to a Solid State Drive (SSD) for an increase in ...
11
votes
2answers
2k views

What happens at the user/OS level when an SSD finally wears out?

I have been reading up on SSD technology and don't know of any first hand reports on what happens when an SSD eventually fails due to over use. I am most interested in the SSD that apple includes as a ...
3
votes
4answers
2k views

How can I add some SSD goodness to my MBP?

I have a decently modern (late-2010) Macbook Pro, with a 7200 RPM 500GB HD. I need this much space, but I'd like to have an SSD for compiling code, running the OS, and running games. Is there any way ...
3
votes
2answers
482 views

How to turn off spindle of internal HDD on MacBook from command line?

I'm going put SSD drive instead of DVD and move OS-X to SSD. Big capacity HDD I'm gonig leave to have some place for large multimedia data and archives. So I whant keep HHD in spindle off mode most ...
0
votes
0answers
2k views

Why am I getting a BSOD when resuming Windows 7 x64 on my SSD with AHCI?

I recently got an OCZ Vertex 2 SSD for my Spring 2010 i7 MacBook Pro and am having issues getting AHCI working reliably under Windows 7 x64 in Boot Camp. Following the instructions outlined here I've ...