The airport utility is software that runs on iOS, Mac OS X and Windows to configure and monitor the Airport family of routers as well as the Time Capsule.

learn more… | top users | synonyms

5
votes
4answers
3k views

External USB drive connected to Airport Extreme doesn't show up in Airport Utility

I have connected an external drive to my Airport Extreme, but it doesn't show up in Finder, and it doesn't show up in the list of drives when I connect to the Airport Utility. The same drive worked ...
1
vote
2answers
5k views

Configuring AirPort Extreme with Existing Router

I'm setting up an office network consisting of: - ATT ADSL2 Modem -> CISCO Router (198.x.x.x) -> Airport Extreme I'm having an issue getting the Airport Extreme (6th Gen) to connect to the network. ...
2
votes
1answer
36 views

What's this last device in AirPort Utility's Wireless Clients list?

I can match all other devices to my physical devices. But I don't know what the last one is. It doesn't even have a name, only a hardware address.
2
votes
1answer
184 views

iPhone wifi is half the speed of Mac when using an Airport Express

My internet account with Comcast is 75 Mbps down and 10 Mbps up. To verify my internet speeds, I used SpeedOf.Me in Safari on my 2011 iMac and 2014 Macbook Pro which gave me 75-80 Mbps down and 10-15 ...
1
vote
1answer
835 views

I cannot see a particular USB printer from AirPort Extreme

I have an older AirPort Extreme (UFO, Version 5.7). I can connect an Epson MX330 printer to the USB port of the AirPort Extreme and it appears on the AirPort Utility "Printers" tab, and I can print ...
1
vote
1answer
1k views

How do I set an empty search domain on Airport/Time Capsule

My ISP supplies their own search domain via DHCP, which I don't want being passed on to my own devices. However, if you leave the field for 'search domain' empty on an Airpot/Time Capsule it will ...
1
vote
1answer
123 views

AirPort Base-station Visibility

I bought an AirPort Extreme to use in my college apartment. The ISP is technically my university, so the device is set in "bridge" mode to avoid double NAT errors. When I check the network diagram ...
0
votes
1answer
29 views

Re-enable Wi-Fi on a Time Capsule

I have a Time Capsule that normally acts as a Wireless bridge to my DSL router. (All DHCP and NAT takes place on the router, not the Time Capsule.) During debugging of home networking issues, I ...
0
votes
1answer
2k views

Airport Extreme PPPoE auth and wireless

My provider asks for a PPPoE authentication for internet and I don't know how to do it with Airport Extreme in order to have the wireless working. I can connect to the internet via ethernet using the ...
0
votes
1answer
243 views

Will a Airport Utility archive action delete files on the target disk?

Will an Airport Utility archive action delete files on the target disk? I have an older Apple Time Capsule 2TB and I have a Laccie 6TB USB3.0 drive connected to it in "safe 3TB" configuration. In my ...
0
votes
1answer
111 views

Back to My Mac - Can people see it?

I just enabled "Back to My Mac" so that I can access my Time Capsule when I'm out and about. I'm just curious if other people can see my Time Capsule in their "Shared" tab in Finder (or anywhere ...
0
votes
1answer
788 views

AirPort Utility not showing AirPort nodes, which ARE there, and I AM using them

Today neither of the AirPorts show up in the AirPort Utility. I know the hubs are there, that's how I'm accessing the Internet. They appear with the yellow caution indicator /!\ and when I click ...
0
votes
1answer
3k views

Airport Extreme 802.11ac Can't See USB HDD

Hardware: Airport Extreme 802.11ac Transcend StoreJet 250GB HDD Belkin 4-port, powered USB hub Configuration: HDD formatted as MS-DOS (FAT32) via Disk Utility HDD connected to USB hub Airport ...
0
votes
1answer
93 views

Find individual users' backup size in Time Capsule

I'm the administrator of a 2 TB Time Capsule, to which my co-workers connect via individual accounts. I recently noticed a sudden jump in usage — from ~1 TB (0–1 over the course of 8 months) to ~1.5 ...
5
votes
0answers
54 views

Why does opening AirPort Utility restore my internet connection?

My office has a D-Link router hooked up to DSL. Connected to it via Ethernet is an Airport Extreme (6th generation). The Airport Extreme is the wireless router to which my MacBook and other users ...
2
votes
0answers
806 views

Adding a third Airport Express causes dramatic network slow down

When TWO AirPort Express are on everything works as expected, strong and fast wifi everywhere, music streams fine. But when a THIRD AirPort Express is on, the wifi slows down to about 100k/s This is ...
1
vote
0answers
213 views

Setting up Port Forwarding for 2 y-cams on an Airport Extreme Base Station

I recently purchased the latest version of the Apple Extreme Base Station and I have 2 Y-cam IP cameras (Knight S and Cube) that I use for baby/kid monitors. I want to configure them to be viewable ...
1
vote
0answers
394 views

Airport Utility gives Bogus status, misbehaves a lot

The Airport Utility shows all 3 of my Wifi access points as being offline today, all have the yellow caution triangle "/!\" and display the message "Device Not Found: AirPort ExtAC was previously part ...
1
vote
0answers
652 views

How do I capture the log output from Airport Utility?

I'm using Airport Utility 5.6.1 on Mavericks (installed from links here). I'm trying to figure out how the Advanced > Syslog Destination Address setting works... What kind of value is that field ...
0
votes
0answers
14 views

How to connect to a specific AirPort device?

I recently setup a new AirPort extreme to extend my Base Station. When I go into Airport Utility, the devices sitting right next to the Airport Extreme are connected to the base station. How can I ...
0
votes
0answers
15 views

Internal signal strength of Airport Extreme?

I'm using an Airport Extreme as a wi-fi-to-ethernet bridge. Since I'm on ethernet I cannot Option-Click on the Wi-Fi menu to see the signal-to-noise ratio and other characteristics. Is there a way ...
0
votes
0answers
109 views

TimeCapsule in DHCP&NAT with ISP router in bridge mode does not work. Everything is fine the other way round

Until today, I've been using my ISP router in "Router" mode and my time capsule in Bridge mode. TC is connected to ISP router via ethernet port (ISP upstream and TC downstream) Now, to use Back to ...
0
votes
0answers
159 views

How to turn off Bridge Mode in Airport Utility?

I want to shutout some websites on all my devices (Macs, iPads, and iPhones) in my home network and after I searched for it, I ended up using a service called OpenDNS. However, they instruct me to ...
0
votes
0answers
132 views

How can I turn on IGMP in Airport Express?

My network provider is providing my house with IPTV and for that I need IGMP to be turned on on my Airport Express. However, there is no option for it on the router. Does Airport express support IGMP ...
0
votes
0answers
269 views

Setup: AirPort Express as Bridge between Building WiFi and Time Capsule in Building w/o Ethernet Jacks

I've recently moved into a new building that has wifi included for its tenants. I have no access to the modem, router, or any ethernet jacks. I have an AirPort Time Capsule 802.11ac that I would like ...
0
votes
0answers
172 views

Wireless clients can't connect when I extend my network with an AirPort Express

I'd like to create a roaming network so that all corners of my building have good WiFi coverage. Here's my setup: Mac Mini running OS X Server (with DNS, DHCP, Open Directory enabled) 24-port ...
0
votes
0answers
74 views

How do you emulate an AirPort Base Station with a Windows machine?

If possible, how do you make a Windows desktop (Win 8.1) machine act as an Apple AirPort Base Station so that I can use Time Capsule on my MBP to backup to a drive on my Windows machine? Bonus points ...
0
votes
0answers
221 views

How to extend range of airport express that feeds a receiver

I have an airport extreme in the basement I use to send out my wireless signal. Upstairs, I wirelessly connect my airport express to my extreme so that I can extend the range of my internet signal ...
0
votes
0answers
622 views

Issues Setting Up Airport Express to Extend Network

I have tried to set up my WLAN with the following topology: Cable modem providing Internet connectivity Airport Extreme as the primary access point Airport Express as a repeater (to extend my ...
0
votes
0answers
3k views

Setting Up Port Forwarding For Foscam Camera With Apple Airport Extreme

I am trying to setup a Foscam FI8189W IP Camera to work with my Airport wifi network. I have tried to follow the instructions that Foscam has given but I believe the problem is with my Airport setup. ...
0
votes
0answers
698 views

Time Capsule port forwarding not working?

I'm developing an app, and one of the requirements is to connect to a computer with the URL scheme: http://ip/~username/file The problem, however, is that I can't connect to my Mac remotely. Let's ...
0
votes
0answers
559 views

AirPort Express behaves strangely while being connected to ADSL modem

I have an AirPort Express linked to an ADSL modem with Ethernet cable. Statement 1: ADSL modem is set up as a router with DHCP, so any cable connection to it will provide an Internet access. If one ...