0
votes
0answers
24 views

Issues Setting Up Airport Express to Extend Network

I have tried to set up my WLAN with the following topology: Cable modem providing Internet connectivity Airport Extreme as the primary access point Airport Express as a repeater (to extend my ...
0
votes
1answer
47 views

Set Static IP Reservations on AirPort Extreme

I am new to this, but I set up a little server for something up on a laptop connected to the Ethernet of the airport express. I had the server down for a few months and when I plugged it back in, I ...
1
vote
1answer
36 views

MacBook not able to connect to IRC server over Airport

I have a MacBook Air connected to an Airport Express and I am trying to connect to an IRC server. I am able to connect to the IRC server down the street at the cafe. I am able to connect to the IRC ...
1
vote
1answer
222 views

How do I set up IPv6 on my Airport Extreme?

I am trying to set up IPv6 on my Airport Extreme. According to AT&T / BellSouth, my network is IPv6 ready. Network Setup I currently have two parts to my network setup. Westell Model 6200 ...
0
votes
1answer
75 views

You can't use Airport Utility without Airport Extreme?

I want to use Airport Utility to settle wireless time limits, it seems that I can't use Airport Utility. Is it because you can use Airport Utility only with Apple hardware like Airport Extreme?
2
votes
0answers
119 views

Adding a third Airport Express causes dramatic network slow down

When TWO AirPort Express are on everything works as expected, strong and fast wifi everywhere, music streams fine. But when a THIRD AirPort Express is on, the wifi slows down to about 100k/s This is ...
1
vote
1answer
940 views

Can't see A1084 AirPort Express behind A1354 AirPort Extreme

Can anyone please make any suggestions...? (Preferably, step by step instructions to resolve this issue). I am using AirPort Utility 6.3.2 on a MacBook Pro running MacOS X 10.9.1 Mavericks. AirPort ...
1
vote
1answer
950 views

How to use 2009-era Airport Extreme in Bridge Mode Wifi

I have a 2009-era Airport Extreme that used to provide routing and WiFi for our cablemodem. Time Warner updated our cablemodem to a DG860, which comes with its own built-in WiFi. I'd like to ...
0
votes
0answers
105 views

Access Control List on Airport Extreme Roaming Network

I am using an airport extreme wired to an airport express. The extreme is connected to the internet. The express extends my network to another room where i can't get wifi access hence the wired ...
0
votes
1answer
209 views

Cannot change IPv6 Mode on my Airport Extreme (5th generation) using Ariport Utility 6

My provider recently added support for IPv6 and I wanted to configure it on my side. Unfortunately Airport Utility does not allow me to select appropriate IPv6 mode and I'm stuck with the tunnel mode ...
2
votes
2answers
543 views

Airport Extreme mesh network over Ethernet

I have purchased three Airport Extreme routers. I have a cable modem in one room that currently feeds into our primary router (which I want to replace with an Extreme), which feeds into a switch, ...
0
votes
1answer
219 views

AirPort Utility not showing AirPort nodes, which ARE there, and I AM using them

Today neither of the AirPorts show up in the AirPort Utility. I know the hubs are there, that's how I'm accessing the Internet. They appear with the yellow caution indicator /!\ and when I click ...
0
votes
0answers
1k views

Setting Up Port Forwarding For Foscam Camera With Apple Airport Extreme

I am trying to setup a Foscam FI8189W IP Camera to work with my Airport wifi network. I have tried to follow the instructions that Foscam has given but I believe the problem is with my Airport setup. ...
0
votes
1answer
964 views

Airport Extreme 802.11ac Can't See USB HDD

Hardware: Airport Extreme 802.11ac Transcend StoreJet 250GB HDD Belkin 4-port, powered USB hub Configuration: HDD formatted as MS-DOS (FAT32) via Disk Utility HDD connected to USB hub Airport ...
2
votes
1answer
10k views

Extend wireless network from DSL router with Airport Express

This is what I want to do: ISP's DSL router (LAN port) <-- ethernet cable --> (WAN port) Airport Express (I know it's not possible to extend non Apple WiFi points wirelessly, so I need the ...
0
votes
1answer
625 views

Airport Extreme & Airport Utility 6.3, “Port Settings” (i.e. port mapping) Unavailable

I'm trying to add port forwarding for a few services on my iMac and haven't used the airport utility in quite a while, so after poking around, I found the port mapping settings (i.e. Airport Utility, ...
1
vote
1answer
496 views

Cannot configure Airport Extreme dual band [closed]

I've had this Airport Extreme for about three years. Recently I moved into a new house with a new internet service. It connected to the CenturyLink router (Actiontec C1000A) in bridged mode and worked ...
-1
votes
1answer
260 views

Airport express and Airport utility

I moved and had to change my network. After juggling for reconfiguring my airport express station, I found out it was impossible to connect to them, even after a factory reset : they just would NOT ...
4
votes
1answer
1k views

Neighbor's Airport Extreme extending my wireless network?

I noticed a new machine on my network -- it's my next-door neighbor's Airport Extreme! My network is set up with a WPA2 Personal password, and I don't believe that he's cracking passwords to steal ...
2
votes
2answers
2k views

Is it possible to change the default gateway of the DHCP server side of an Airport Extreme

I will try to be brief. In my career I have always used the upper end of the subnet for network devices. For instance, I use .250-.254 for network devices such as the routers. I am very fond of using ...
0
votes
3answers
1k views

Where could I get my networks domain name?

I am trying to determine domain name of my network. I tried some programming methods, commands but i could not get domain name of my network.I got ip address using cat /etc/resolv.conf I was doing ...
1
vote
1answer
270 views

Can't add DHCP Reservation with Airport Utility

I just bought an AirPort extreme (bought December '12). I'm trying to assign a static IP for my printer. With Airport Utility 6.2, under Network, I click on the plus sign under DHCP Reservations. All ...
1
vote
0answers
262 views

How do I set an empty search domain on Airport/Time Capsule

My ISP supplies their own search domain via DHCP, which I don't want being passed on to my own devices. However, if you leave the field for 'search domain' empty on an Airpot/Time Capsule it will ...
0
votes
0answers
408 views

Time Capsule port forwarding not working?

I'm developing an app, and one of the requirements is to connect to a computer with the URL scheme: http://ip/~username/file The problem, however, is that I can't connect to my Mac remotely. Let's ...
0
votes
1answer
441 views

AirPort Express extending connects in the wrong order

Recently, after extending a wireless network on a setup with one Extreme and one Express (both AirPort base stations), I've been experiencing issues regarding which base station extends which on a ...
1
vote
1answer
3k views

AirPort Extreme: slow upload via ethernet, but fast via wireless

I have a new dual-band AirPort Extreme base station (v7.6.1). I've used it to create a wireless network, and I also connect my Mac Pro (Early 2009, running 10.8.2) via ethernet. When I run a speed ...
0
votes
1answer
245 views

Is it possible to configure an Airport Extreme Base Station to forward to an external IP address?

Our company has a small office but we often work remotely. One of our service providers requires that we access their customer service portal from a known IP address. We don't all have dedicated IPs ...
0
votes
1answer
2k views

Double NAT error on new AirPort Express

I live in an apartment complex with a single network connection. The address is given to me from the complexes shared router as a DHCP address - this is where the ISP has our complex's modem. My ...
1
vote
1answer
108 views

AirPort Base-station Visibility

I bought an AirPort Extreme to use in my college apartment. The ISP is technically my university, so the device is set in "bridge" mode to avoid double NAT errors. When I check the network diagram ...
2
votes
3answers
5k views

What does “Enable AirPlay over WAN” do?

What does AirPlay over WAN do? I have an AirPort Express 802.11n. This was the last generation to hook directly into the outlet.
1
vote
2answers
2k views

Reserve a static IP address on an older Airport Extreme base station

I'm trying to give my server a static IP address (it's connected directly to the base station) but it's an old base station, (Airport Extreme 802.11g) so there's no obvious way to reserve an IP ...
0
votes
1answer
287 views

AirPort Utility (5.6) stuck on “Configuring your existing wireless network to allow it to be joined”

I just bought a new AirPort Extreme and set it up as my main wireless network. I also have a 1st gen. Time Capsule and a 1st gen. AirPort Extreme in addition that I want to connect like this: Main AE ...
0
votes
0answers
400 views

AirPort Express behaves strangely while being connected to ADSL modem

I have an AirPort Express linked to an ADSL modem with Ethernet cable. Statement 1: ADSL modem is set up as a router with DHCP, so any cable connection to it will provide an Internet access. If one ...
1
vote
1answer
743 views

Time Capsule Setup Woes

I received a 2TB Time Capsule today, and replaced an Airport Extreme. However, after replicating the settings from the Airport Extreme on the Time Capsule, there was no internet connection (amber ...