3
votes
0answers
37 views

iMac wireless speed drops precipitously after extended time away

I had a correct connection to the Internet: But as of a few days ago, whenever I come back to my computer after a while and jiggle the mouse to turn off the screensaver, my internet speed plummets: ...
1
vote
1answer
85 views

How to set up Time Capsule in wireless bridge mode?

I can't find any clear, step-by-step instructions on how to set up a Time Capsule in wireless bridge mode. Eg, how to disable its routing functions and set it up as a switch/repeater connected ...
0
votes
0answers
15 views

AirPort constantly losing and reconnecting to Wi-Fi on Mac Mini

I have purchased an old Mac mini 1,1 (Intel). When I purchased it, it's connected to Wi-Fi with poor signal but worked. OS was Mac OS X 10.6.8. Later I was opened the Mac (there was screws on the ...
0
votes
1answer
24 views

AirPort Express or Extreme?

So I'm no expert when it comes to advanced internet knowledge and I need to update my Wi-Fi router. We have 14 megabits (I think, no pro at this) or something and I have my room in the floor right ...
1
vote
1answer
37 views

Keep wifi connected after log off

Is there a way to maintain a wifi connection after log off on OS X 10.8 Lion? I would like to be able to log in, log off, and log into a new account on my domain without having to plug in my ...
2
votes
1answer
63 views

Problems Setting up an OS X Radius Server

I have a Mavericks server running OS X server 3.1.2, and three AirPort Extreme APs. My server is running Open Directory, and we would like to get the Radius service up and running. I've been running ...
1
vote
0answers
60 views

iMac 21.5″ Wi-Fi Issues

My iMac constantly dropping its internet connection in the last couple of days. I'm connected to a 2.4GHZ Airport Express. Not a router issue, because my iPhone and iPad works just fine, no ...
0
votes
0answers
48 views

How to extend range of airport express that feeds a receiver

I have an airport extreme in the basement I use to send out my wireless signal. Upstairs, I wirelessly connect my airport express to my extreme so that I can extend the range of my internet signal ...
1
vote
1answer
22 views

Suddenly cannot print over WiFi

I have an Epson Stylus NX625 that my family had been using from several Macs and Macbooks until recently. Now when we attempt to print the Mac reports "Looking for printer" for several minutes ...
0
votes
1answer
105 views

How to create your own wifi network in mac without internet cable

I want to create a network in my room with my mac. I have low wifi signal in my room and my ipad cannot detect it but my mac can. However, I am using a retina mac and thus cannot connect the ethernet ...
1
vote
1answer
73 views

Failing to connect to WiFi network with MacAuthEvent error

I'm unable to connect to any WiFi network. When attempting to connect, before the popup prompting me to run network diagnostics, the console shows the following in the logs: 7/14/14 8:52:06.000 AM ...
0
votes
0answers
78 views

Issues Setting Up Airport Express to Extend Network

I have tried to set up my WLAN with the following topology: Cable modem providing Internet connectivity Airport Extreme as the primary access point Airport Express as a repeater (to extend my ...
0
votes
0answers
89 views

OS X, connection drop downs, socket closed prematurely, mDNS

I have big problem with my OS X Mavericks Wi-Fi connection. I have tried calling my ISP (now we have stronger AP antenna), NVRAM reset, OS X reinstall, run own DNS local with dnsmasq, manually set IP ...
0
votes
1answer
52 views

Macbook connects to modem, internet works, but modem -> router, no internet

I'm running a netgear modem CG3000D, and have been able to access internet without problems. However my speeds on the internet were slow for gaming and extensive usage, so I purchased a netgear R6250 ...
1
vote
1answer
202 views

Wireless Diagnostics: what does “_handleLinkEvent: Got an error trying to queyer WiFi for power. Resetting state variables” mean?

I have a Macbook Pro (model 10,1) running OS X 10.9.3 (13D65) with a wireless problem; it keeps dropping connection. That is, it says it's connected, but if you ping a host...even localhost...the ...
0
votes
1answer
129 views

Set Static IP Reservations on AirPort Extreme

I am new to this, but I set up a little server for something up on a laptop connected to the Ethernet of the airport express. I had the server down for a few months and when I plugged it back in, I ...
1
vote
1answer
68 views

Interstitial screen/marketing layer on Airport guest wifi

Is there a way I can add an interstitial screen when a user first logs in to my Airport Extreme's guest network whereby I can make a marketing ask (like, "Like us on Facebook!") and require them to ...
0
votes
1answer
32 views

Network service inactive/Unable to add Wi-Fi network on mac pro

I have no idea what happened but my Wi-fi network has disappeared completely! The Wi-fi icon found on the top menu bar is gone. I'm unable to create a new Wi-fi network service but only able to ...
0
votes
1answer
74 views

How to configure mac book pro to act as an Access Point (and not a router)?

I am connected to internet via ethernet cable on my MBP laptop. I want to have access to internet wirelessly on my iPad as well. How can I config my MBP (OSX 10.6.8) to act as an "Access Point" ? I ...
2
votes
1answer
216 views

Configured Airport as Bridge and use OS X Server for DHCP and DNS, no Internet

I want to use my Mac Mini as an OS X Server with the following services: DNS DHCP Open Directory Profile Manager I configured my Airport Extreme under the "Internet" tab to use my static IP ...
0
votes
1answer
197 views

packet forwarding on OSX mavericks

My MacBookAir(Mavericks 10.9.2) need to share my internet connection(wi-fi;en0) with BeagleBoneBlack(BBB) which are in 192.168.7.0 subnet over en6 interface. ifconfig $ ifconfig lo0: ...
4
votes
2answers
996 views

AirPort Express and Extreme Wi-Fi strength comparison

I'm about to buy an AirPort model but I'm not sure if there is any difference in terms of signal strength and range. There have been comparisons between these two models in the past but I don't think ...
2
votes
2answers
23 views

Broken AirPort Expressfirst generation

I've got a first generation AirPort Express and when I plug it in the wall (electricity outlet) it will turn orange and do nothing besides that. I cannot access this device via AirPort Utility When ...
0
votes
1answer
80 views

Is it unsafe to put router into “DHCP and NAT” mode?

When I was trying to get my Raspberry Pi online, in airport utility I put my router in DHCP and NAT mode and entered ports (80). Did I open up these ports to the internet? Would this be unsafe to do? ...
3
votes
2answers
258 views

Can I use AirPlay with an Airport Express when the WAN port is not connected?

Is it possible to connect to the Airport Express over WiFi with my MacBook Pro and use it as an AirPlay device when it doesn't have a connection to the internet? I will not have access to the ...
0
votes
1answer
194 views

Mac mini with intermittent wifi connnectivity problems

Mac mini (2.4 core 2 duo, 10.6.8) has served well for years. Now it seems to be having wifi connectivity problems with no rhyme or reason to their appearance. Several other devices (laptops, phones) ...
1
vote
1answer
105 views

How to automatically mount airport connected hard drive as read only for a user account

I have an external hard drive connected to my airport extreme. I am able to access the drive without any problems. However, I have user accounts set up for my two young children. I want to give access ...
2
votes
1answer
84 views

How to allow port 80? (NAT)

I want to allow traffic to flow from the Internet to my Raspberry Pi, the IP address of the Pi needs to look as though it is from the router (NAT). The ports that need to be allowed through are port ...
0
votes
0answers
229 views

Can an Airport Express extend a non-Apple wifi network, wirelessly?

Can I use an Airport Express to extend my wifi network if my current wifi network doesn't have any other Apple access points on it. I wish to extend wirelessly, without a wired connection between the ...
2
votes
0answers
176 views

Adding a third Airport Express causes dramatic network slow down

When TWO AirPort Express are on everything works as expected, strong and fast wifi everywhere, music streams fine. But when a THIRD AirPort Express is on, the wifi slows down to about 100k/s This is ...
3
votes
1answer
401 views

If I connect an Ethernet cable, will my Mac automatically select the fastest route for local network traffic?

Background I have a fairly robust network setup at home, but am a little unclear on internal Mac networking. My LAN consists of two bridged AirPort Extremes and a cable modem. Everything is connected ...
1
vote
1answer
346 views

Mac keeps searching for networks even when it's already connected to a network

My 2013 MacBook Air keeps searching for networks when it is already connected the to internet. This is causing unstable connections which slows down my speed. Is there a remedy for this problem?
0
votes
0answers
81 views

Why is my Airport Express so much slower than ethernet?

I'm using the dual-band Airport Express and seeing download speeds of at least 50% that of an ethernet connection. I get ~120 Mbps down at peak with ethernet; usually I'll see a peak down of ~70 Mbps ...
1
vote
0answers
197 views

MacBook Pro issue with local IP download over wifi

I am facing a strange situation on my MacBook Pro. I'm serving a file via http (whatever server I use, I get the same problem: apache, node.js, ...): [http://localhost:8080/myFile] with my wifi ...
0
votes
1answer
58 views

mid-2011 MBA: sluggish wifi on WPA/WPA2 networks

Machine specs: Mid-2011 MacBook Air with a 1.8 GHz Intel Core i7 processor, and 4 GB DDR ram, Intel HD Graphics 3000 384 MB, OS 10.9.2 (Mavericks). Wifi connection is sluggish with multiple ISPs on ...
5
votes
2answers
345 views

How to show that my Internet connection is still up and active in menu bar?

I am looking for a solution to have the AirPort WiFi or other icon in the menu bar show when an active Internet connection is established. I live in a funky WiFi connection area and connect true a ...
1
vote
0answers
360 views

Wifi trouble since 10.9.2 update

Since I updated my system from 10.9.1 to 10.9.2, I now have a very annoying WiFi issue : when I click on the airport icon on the top bar, the WiFi networks are no longueur scanned and I sometimes ...
9
votes
5answers
3k views

Why does my Mac take a long time (30+ seconds) to find my home wifi?

I have a retina MacBook Pro 15" running Mac OS X 10.9.4. When I wake it from sleep at work, it's connected to the wifi network before I've even entered my password. But at home, with a Airport Extreme ...
2
votes
1answer
105 views

During a Time Capsule 35 Pass Erase, do I have to keep my computer on / running?

Back Story: Okay, so I just upgrade my Time Capsule from a 2 TB (802.11n) to a 3 TB (802.11ac). Yay! However, after transferring over all my files, I needed to erase my old Time Capsule Partition. I ...
2
votes
1answer
1k views

Can't see A1084 AirPort Express behind A1354 AirPort Extreme

Can anyone please make any suggestions...? (Preferably, step by step instructions to resolve this issue). I am using AirPort Utility 6.3.2 on a MacBook Pro running MacOS X 10.9.1 Mavericks. AirPort ...
1
vote
0answers
242 views

How do I capture the log output from Airport Utility?

I'm using Airport Utility 5.6.1 on Mavericks (installed from links here). I'm trying to figure out how the Advanced > Syslog Destination Address setting works... What kind of value is that field ...
1
vote
1answer
86 views

How to track down why Wi-Fi random disconnects on one particular network?

See comment in accepted answer for the likely problem source. I'm using my laptop (an early 2013 Retina MacBook Pro running OS 10.9.1) on a campus network. I have had random disconnection issues ...
0
votes
1answer
108 views

Two local networks: routing confusion

On my 17" MBP (running Mavericks) I'm sometimes signed on to two different LANs, one with my AirPort interface and one with Ethernet. My Networks are set up (in the Network System Preference Panel) ...
0
votes
0answers
32 views

AirPort Extreme network drive only uses the free space

I'm trying to expand my network by attaching a hard drive to my AirPort Extreme. The whole setup works and the drive is accessible by any computer connected to the WiFi, but for some reason, the ...
1
vote
2answers
1k views

How to use 2009-era Airport Extreme in Bridge Mode Wifi

I have a 2009-era Airport Extreme that used to provide routing and WiFi for our cablemodem. Time Warner updated our cablemodem to a DG860, which comes with its own built-in WiFi. I'd like to ...
0
votes
1answer
77 views

Do all Airport Express generations support client mode + Airplay?

I basically want to achieve what is explained in this question/answer. I have an existing, non-apple WiFi network and I want to use an Airport Express to be able to play music from my MacBook Pro ...
1
vote
1answer
77 views

Fast screen sharing

Ok, so, I want to buy a Mac Mini with OS X server. I want to run it without any monitor, or keyboards, or mouse. Now, I want to control it remotely from my MacBook via Screen Sharing. Since I have ...
0
votes
0answers
383 views

AirPort Extreme 802.11ac Performance Issues

I'm running an 802.11ac wireless network using three AirPort Extreme base stations. While setting these fellas up is very simple and straightforward, I've been running into several issues... APE A ...
1
vote
0answers
208 views

How to set up an AirPort Express so another router can connect to it?

I have an Airport Express 802.11n 1st generation (in other words, the last one before they began to look like a white AppleTV). I would like to have this as my main router and have a second router ...
2
votes
1answer
2k views

Airport Router DHCP Client Identification

I have a 3rd Gen Airport Extreme (802.11n 3rd Gen Dual band) as my main router. Attached to it are an Airport Express (802.11n 1st Gen Single Band) which is connected by and extends WiFi over it's ...