0
votes
1answer
28 views

How to mount a hard drive to AirPort Extreme?

I have the new AirPort Extreme 802.11ac. I plugged in my 2TB Western Digital external hard drive into the AirPort Extreme USB port. I tried to find the mounted hard drive in my networks on Windows and ...
2
votes
0answers
27 views

Adding a third Airport Express causes dramatic network slow down

When TWO AirPort Express are on everything works as expected, strong and fast wifi everywhere, music streams fine. But when a THIRD AirPort Express is on, the wifi slows down to about 100k/s This is ...
1
vote
1answer
348 views

Can't see A1084 AirPort Express behind A1354 AirPort Extreme

Can anyone please make any suggestions...? (Preferably, step by step instructions to resolve this issue). I am using AirPort Utility 6.3.2 on a MacBook Pro running MacOS X 10.9.1 Mavericks. AirPort ...
1
vote
0answers
82 views

How do I capture the log output from Airport Utility?

I'm using Airport Utility 5.6.1 on Mavericks (installed from links here). I'm trying to figure out how the Advanced > Syslog Destination Address setting works... What kind of value is that field ...
1
vote
2answers
93 views

See all active clients with Airport Extreme/Express

How can I see all (active) clients on my Airport Extreme. I can’t find such option in the current Airport Utility.
0
votes
1answer
80 views

Airport Extreme, no internet

I have an Airport Extreme (4th generation) with firmware 7.5.2; it has been working fine for a long time, but stopped working properly after a brief power outage a couple of days ago. The router ...
1
vote
1answer
369 views

How to use 2009-era Airport Extreme in Bridge Mode Wifi

I have a 2009-era Airport Extreme that used to provide routing and WiFi for our cablemodem. Time Warner updated our cablemodem to a DG860, which comes with its own built-in WiFi. I'd like to ...
0
votes
1answer
169 views

Cannot change IPv6 Mode on my Airport Extreme (5th generation) using Ariport Utility 6

My provider recently added support for IPv6 and I wanted to configure it on my side. Unfortunately Airport Utility does not allow me to select appropriate IPv6 mode and I'm stuck with the tunnel mode ...
2
votes
2answers
334 views

Airport Extreme mesh network over Ethernet

I have purchased three Airport Extreme routers. I have a cable modem in one room that currently feeds into our primary router (which I want to replace with an Extreme), which feeds into a switch, ...
0
votes
1answer
173 views

AirPort Utility not showing AirPort nodes, which ARE there, and I AM using them

Today neither of the AirPorts show up in the AirPort Utility. I know the hubs are there, that's how I'm accessing the Internet. They appear with the yellow caution indicator /!\ and when I click ...
0
votes
0answers
1k views

Setting Up Port Forwarding For Foscam Camera With Apple Airport Extreme

I am trying to setup a Foscam FI8189W IP Camera to work with my Airport wifi network. I have tried to follow the instructions that Foscam has given but I believe the problem is with my Airport setup. ...
0
votes
0answers
21 views

From older airport express to brand new 2006 AirPort Extreme?

I've used Airport Express for many years. We have broadband that connects to the Airport Express. All of my past, old & new Apple products have worked fine with it but it has to be reset a lot! ...
0
votes
1answer
664 views

Airport Extreme 802.11ac Can't See USB HDD

Hardware: Airport Extreme 802.11ac Transcend StoreJet 250GB HDD Belkin 4-port, powered USB hub Configuration: HDD formatted as MS-DOS (FAT32) via Disk Utility HDD connected to USB hub Airport ...
2
votes
1answer
7k views

Extend wireless network from DSL router with Airport Express

This is what I want to do: ISP's DSL router (LAN port) <-- ethernet cable --> (WAN port) Airport Express (I know it's not possible to extend non Apple WiFi points wirelessly, so I need the ...
0
votes
1answer
560 views

Airport Extreme & Airport Utility 6.3, “Port Settings” (i.e. port mapping) Unavailable

I'm trying to add port forwarding for a few services on my iMac and haven't used the airport utility in quite a while, so after poking around, I found the port mapping settings (i.e. Airport Utility, ...
0
votes
2answers
1k views

How can I look at Airport logs?

I have a VirginMedia connection using one of their "Super Hub"'s, their wireless configuration is turned off and I connect my Airport Extreme via RJ45 cable. I connect my iMac from the Extreme via ...
0
votes
1answer
472 views

Why does MacBook connect to AirPort Express but has no internet connection, while iMac works just fine? [duplicate]

My 2007 MacBook (10.6.8) worked perfectly fine with my AirPort Express, until I added a 2010 iMac (10.8.4) to the network. When I first setup the iMac it connected to the AirPort Express, but not to ...
-1
votes
1answer
249 views

Why do I need to reboot after updating Airport Utility to version 6.3.1?

Why do I need to reboot after updating Airport Utility to version 6.3.1? Is there some kind of serious kernel tweaks involved in Apple's new router tool? Since when does a robust UNIX operating ...
1
vote
1answer
432 views

Cannot configure Airport Extreme dual band [closed]

I've had this Airport Extreme for about three years. Recently I moved into a new house with a new internet service. It connected to the CenturyLink router (Actiontec C1000A) in bridged mode and worked ...
2
votes
1answer
450 views

Is it possible to configure the 2013 Airport Extreme to use a syslog server?

I know it was (and still is) possible to configure the earlier Airport Extreme and Airport Express stations to forward syslog events to an external server. The trick is to use AirPort Utility 5.6.1 ...
-1
votes
1answer
235 views

Airport express and Airport utility

I moved and had to change my network. After juggling for reconfiguring my airport express station, I found out it was impossible to connect to them, even after a factory reset : they just would NOT ...
1
vote
1answer
1k views

How does the Airport Access Control work?

I would like to set some rule on my Time Capsule and Airport Express in such a way that some cell phones can connect only in specific time slots. In my network both the devices are connected to a ...
4
votes
1answer
980 views

Neighbor's Airport Extreme extending my wireless network?

I noticed a new machine on my network -- it's my next-door neighbor's Airport Extreme! My network is set up with a WPA2 Personal password, and I don't believe that he's cracking passwords to steal ...
2
votes
2answers
2k views

Is it possible to change the default gateway of the DHCP server side of an Airport Extreme

I will try to be brief. In my career I have always used the upper end of the subnet for network devices. For instance, I use .250-.254 for network devices such as the routers. I am very fond of using ...
0
votes
1answer
2k views

Configure a network with an AirPort Extreme and Mac Mini Server?

I'm trying to set up a Mac Mini Server for Local File Sharing, Calendar, and Contacts, but I also want to be able to access everything remotely through a domain. I'm using an AirPort Extreme as my ...
1
vote
1answer
240 views

Can't add DHCP Reservation with Airport Utility

I just bought an AirPort extreme (bought December '12). I'm trying to assign a static IP for my printer. With Airport Utility 6.2, under Network, I click on the plus sign under DHCP Reservations. All ...
1
vote
1answer
1k views

Configure an Airport to connect to internet via a wireless hotspot?

The situation: I have free access to Time Warner (TWC) and Optimum hotspots around the USA. Conveniently one is located within range to my apartment. I would like to setup an Airport Extreme or ...
1
vote
0answers
225 views

How do I set an empty search domain on Airport/Time Capsule

My ISP supplies their own search domain via DHCP, which I don't want being passed on to my own devices. However, if you leave the field for 'search domain' empty on an Airpot/Time Capsule it will ...
3
votes
2answers
434 views

No internet when booting from Windows to OS X

I installed Windows with Bootcamp and have an Airport Express. Every time I boot from Windows to OS X it connects to the wireless network but not to the internet. Other devices still keep their ...
1
vote
1answer
503 views

802.11b/g clients in an 802.11n bridged network

I have an Time Capsule set up in 802.11a/n - 802.11b/g/n Automatic mode. I have an Airport Express set up to extend this network. Does the Airport Express just share the 802.11n part of the network ...
0
votes
1answer
355 views

AirPort Express extending connects in the wrong order

Recently, after extending a wireless network on a setup with one Extreme and one Express (both AirPort base stations), I've been experiencing issues regarding which base station extends which on a ...
1
vote
1answer
3k views

AirPort Extreme: slow upload via ethernet, but fast via wireless

I have a new dual-band AirPort Extreme base station (v7.6.1). I've used it to create a wireless network, and I also connect my Mac Pro (Early 2009, running 10.8.2) via ethernet. When I run a speed ...
0
votes
1answer
238 views

Is it possible to configure an Airport Extreme Base Station to forward to an external IP address?

Our company has a small office but we often work remotely. One of our service providers requires that we access their customer service portal from a known IP address. We don't all have dedicated IPs ...
0
votes
1answer
2k views

Double NAT error on new AirPort Express

I live in an apartment complex with a single network connection. The address is given to me from the complexes shared router as a DHCP address - this is where the ISP has our complex's modem. My ...
1
vote
3answers
4k views

How do I activate SNMP on Airport base stations

Using Mountain Lion and the Airport utility I can't find a way to activate SNMP on any of the Airport base stations I have. Even the old ones which were configured to use it don't have the option ...
2
votes
1answer
1k views

Where is the Apple Air Port Utility 'Use dynamic global hostname' option?

I just can't find the "Use dynamic global hostname" option in Apple Air Port Utility 6.1 (610.31). Where can I find this option now?
1
vote
1answer
107 views

AirPort Base-station Visibility

I bought an AirPort Extreme to use in my college apartment. The ISP is technically my university, so the device is set in "bridge" mode to avoid double NAT errors. When I check the network diagram ...
1
vote
3answers
4k views

What does “Enable AirPlay over WAN” do?

What does AirPlay over WAN do? I have an AirPort Express 802.11n. This was the last generation to hook directly into the outlet.
5
votes
3answers
1k views

External USB drive connected to Airport Extreme doesn't show up in Airport Utility

I have connected an external drive to my Airport Extreme, but it doesn't show up in Finder, and it doesn't show up in the list of drives when I connect to the Airport Utility. The same drive worked ...
1
vote
2answers
4k views

How Do I Target an Airport Extreme Shared Disk for Time Machine?

It looks like Apple may have changed something since I last configured this... Some time ago (maybe two years?), I bought an Airport Extreme and plugged an external hard drive into it. From my ...
1
vote
2answers
1k views

Reserve a static IP address on an older Airport Extreme base station

I'm trying to give my server a static IP address (it's connected directly to the base station) but it's an old base station, (Airport Extreme 802.11g) so there's no obvious way to reserve an IP ...
2
votes
1answer
4k views

Extending network with 2 airport express from another router

I have two airport express devices. Is it possible to extend my one airport express with another airport express.
0
votes
1answer
270 views

AirPort Utility (5.6) stuck on “Configuring your existing wireless network to allow it to be joined”

I just bought a new AirPort Extreme and set it up as my main wireless network. I also have a 1st gen. Time Capsule and a 1st gen. AirPort Extreme in addition that I want to connect like this: Main AE ...
0
votes
0answers
378 views

AirPort Express behaves strangely while being connected to ADSL modem

I have an AirPort Express linked to an ADSL modem with Ethernet cable. Statement 1: ADSL modem is set up as a router with DHCP, so any cable connection to it will provide an Internet access. If one ...
4
votes
1answer
4k views

Disconnecting disks from Airport Extreme

Since Apple released the new Airport Utility with the simplified UI, there doesn't seem to be an option to "Disconnect All Users" to kick all users off a hard drive to safely remove it when connected ...
7
votes
4answers
5k views

Can I still use the older Airport Utility 5.5.3 if I install the 6.0 version of Airport Utility?

I have a simple network setup, and have read some initial reviews that say the new Airport Utility 6 for Mac OS X lacks some of the advanced settings that the older utility provides. I depend on those ...
2
votes
3answers
4k views

Sporadic Double NAT problem with Airport Extreme Base Station

I am currently using an Airport Extreme N Base Station (firmware version 7.6) connected to a cable modem to connect around 7 wireless clients and two wired clients to the internet. Prior to this I ...
1
vote
1answer
3k views

Setting up my AirPort Express with no ethernet cable

I have a MacBook Air, and an AirPort Express. Currently, I have my AirPort Express in a different room than my wireless router. How do I connect to my Airport Express wirelessly from my MacBook? When ...
4
votes
1answer
2k views

What can be done to troubleshoot OS X Wi-Fi self-assigning ip address of 169.xxxxxxxxx when other clients connect?

This is incredibly frustrating; I have a new airport extreme and its been working fine for about a month but now it has stopped working. my two MacBooks and dell Inspiron tower cannot connect to the ...
1
vote
1answer
718 views

Time Capsule Setup Woes

I received a 2TB Time Capsule today, and replaced an Airport Extreme. However, after replicating the settings from the Airport Extreme on the Time Capsule, there was no internet connection (amber ...