Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

When I connect my EOS 600d Camera from Canon with my Mac Book Pro (Mountain Lion 10.8.2), it doesn't get mounted as a drive... Nothing is happening. I googled the problem and was able to get my pictures on to my Mac by using a SD-Card reader. Anyhow, it's not recommended to open the camera every time I want to transfer some pictures and EOS Utility isn't compatible to Mountain Lion. Did anyone come across that problem?

share|improve this question
    
Most people use card readers for this. Does your MBP have an SD card reader built in? If not USB SD card readers are inexpensive. Using a card reader takes care of the problem of the Mac knowing about the camera type. –  Richard Jan 4 '13 at 12:19
    
I have a SD card reader, but I would prefer connecting the camera via USB, because of abrasion and stain. –  Chris Conway Jan 4 '13 at 13:10
    
Sorry, not sure I understand "abrasion and stain" ? Can you explain. Are you thinking the card is being abraded by removing it from the camera? If so, you're mistaken. SD cards can be slipped in and out of cameras and readers thousands of times with no issues at all. –  Richard Jan 4 '13 at 23:24
    
Thanks for that info, Richard. I was talking about wearing out the small mechanics on the SD door and as well getting dust into the SD slot. But after some research I can just acknowledge your comment - it does seem to work well for a lot of folks out there. However all I've found is based on personal experience, and I have a camera with a worn out spring inside the battery slot. Even this is not my expensive SLR, it is still annoying every time I try to get that battery out of its slot. An experience that has shaped me forever ;) –  Chris Conway Jan 5 '13 at 12:10
add comment

3 Answers

up vote 2 down vote accepted

You need to update your Canon software. Here is a link to the US Canon web site with the latest software that will work in Mountain Lion.

http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_rebel_t3i#DriversAndSoftware

That said, I highly recommend you use a card reader and remove the card from the camera each time you copy files over. Using the Canon software has ALWAYS been a terrible experience for me. It is painfully slow and convoluted.

Opening and closing the hatch for the memory card will not damage the camera or memory card unless you are very careless about it. I have done this tens of thousands of times with my cameras and memory cards with no issues at all.

share|improve this answer
add comment

Digital cameras are usually not mounted as storage devices. To transfer the photos from the camera, use the Image Capture.app which is under Applications.

Once you connect your camera, it'll show up there.

In the bottom left, see the triangle button. Here you can select whether Image Capture should open automatically once you connect the camera.

share|improve this answer
add comment

I have a Canon 7D & Macbook Pro and have also found this process to be far from seamless. Image Capture doesn't open automatically when connected to Canon SLR' (my 7d or 400d) however it is the best software that I have found for the job. I save the files in an external file structure rather than creating albums and events in iPhoto.

I have have found the Kingston SD card reader a worthwhile purchase. Image capture has also crashed a few times when uploading so I never delete the imported photos using the software and do it manually on the SLR once the device has been disconnected.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.