Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

Any configuration of ram that uses bank 0 on my MacBook causes a kernel panic after about an hour of use.

  • The slot looks fine: all the pins are there, and are straight (no visible bends or breaks)
  • it's not a RAM problem; I've tried four different modules in total, all of them leading to the same results.
  • My EFI/SMC is up to date
  • PRAM and SMC resets don't help
  • OS X reinstallation doesn't help

How should I proceed to troubleshoot/fix this?

share|improve this question
    
Did you try with the same type and brand of memory modules in every slot? –  Gerry Oct 27 '12 at 18:48
    
yes i have, any combination of modules using bank 0 ends up giving kernel panics –  XAleXOwnZX Oct 27 '12 at 21:38
add comment

2 Answers 2

up vote 1 down vote accepted

I know a friend who had a similar problem. He had a 7/8 year old MacBook with 10.4 installed from factory that had two memory slots, but one of them had never been used up until very recently when he bought a second memory card. However, when he inserted the new memory card into the second slot, the computer would have a kernel panic more often than not. It turned out in the end that that specific slot had been built damaged, and since it had never been used, the time for warranty passed without any problem. He was told to, basically, buy a new computer because buying a new motherboard for such a relic was not worthwile. This seems like it is your problem...

Moral of the story: always test all your memory slots short after buying a new computer. It might save you from some serious trouble.

share|improve this answer
add comment

You've covered pretty much all the troubleshooting bases. If it's not a problem with the RAM itself, and it's not a problem with the firmware or software, it's almost certainly a hardware problem.

You could try running the Apple Hardware Test, but it's almost certainly a problem with the memory controller, which as far as I'm aware means a new logic board. Take it to an Apple Store or Authorized Service Provider.

share|improve this answer
    
Gah i'm like 3 years out of warranty :( $600 logic board? F that lol –  XAleXOwnZX Oct 27 '12 at 18:32
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.