Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

Is it OK to use an iPhone 4 that is fully charged while keeping it plugged to wall outlet?

I am worried about stressing battery too much since it is charging and discharging at the same time.

Any issues here?

share|improve this question
    
I've heard that it's not recommended to call someone while charging. Can't remember the reason why, though. But never heard something about using the phone while charging. And I've never had issues doing so. –  Loïc Wolff Oct 11 '12 at 13:37
3  
@LoïcWolff I believe the older phones weren't as happy with a large antenna hanging off of them, but the chipsets and antenna tech in the newer iPhones are so good, the leakage of GSM buzz to others and the device is mostly eliminated via shielding and/or vastly improved DSP. –  bmike Oct 11 '12 at 14:05
add comment

2 Answers

up vote 6 down vote accepted

None whatsoever unless you somehow drop the phone since it's attached to a cord.

The charging system on iOS devices is adaptive and only engages when the battery needs charging current. It's smart and slows down the charge appropriately whether you are using the device or not.

Put another way, the device only asks for enough power to run itself and charge if needed from the wall. The wall doesn't send too much power so there's no risk of overcharging.

share|improve this answer
    
what will happen if u drop while its attached to a cord? –  IvanMatala Oct 12 '12 at 12:10
    
The drop never is a problem, but the subsequent landing can get interesting. –  bmike Oct 12 '12 at 13:28
add comment

TL;DR - Perfectly safe.

The iphone doesn't accurately display it's current charge level with the on screen indicator. If you turn if on (it's in Settings, but off by default) the available battery range is the standard 0-100%. But when it hit's 0%, it still has enough juice to safely close all your apps and save their state for future use. You can test this by having a text half written as your phone dies. Charge the phone u p, and hey presto, your half written text will be there to the letter, because it didn't just pull the power and turn off, it gracefully closed all the apps.

Likewise, when it hits 100%, it doesn't actually stop there, it continues charging even further. I'm not sure for the phone, but I believe that on an iPad 3 it will charge to the equivalent of something like 107%. Why? Well, leaving a battery fully charged without using it, is bad for it's health. Also depleting a small amount of charge (say 2-3% and then recharging is also not ideal. That's why if you have a Mac and you charge it fully, then use a bit so it drops to 97%, and then put it on charge again, it won't actually charge it any further, and will stay on 97% until it drops lower than that, at which point it decides it has safely depleted enough to make it worth charging again. The iPhone does something very similar, but is more clever about it. So it will say 100% before it has actually reached it's charge limit, and from that point on until you start to use sufficient battery, it will charge it to 107% (equivalent, roughly), then use battery until it drops back to %100, then charge to 107% etc etc and so on, so it never just sits there at full charge. You have have noticed that occasionally when at 100%, it will take a long time to hit 99%, this is dependant on whereabouts in the "overcharge" cycle it is in.

share|improve this answer
    
On the iPad 3, it doesn’t charge it to “107%”. That’s not even possible. It shows that it has 100% charge when actually it has 95% charge. It has been the norm on iOS devices since the first iPhone. So, it doesn’t display 100% charge from 100% to 107% actual charge, it displays 100% charge from 95% to 100% actual charge. –  duci9y Oct 11 '12 at 15:25
    
@duci9y Yes, I totally agree with what you are saying, as for whether it's possible or not it depends on what you are measuring against. You are 100% (😉) correct in that it has a window between something like 3% and 95% which it uses and presents to the user as the available charge/capacity, even though it can go lower and higher than the 0 and 100% that it displays to the user. That's why I said "equivalent, roughly", because obviously it cannot physically charge to 107%, but logically it can charge to 107% (or whatever the value is) of it's arbitrary window that it shows to the user. –  stuffe Oct 11 '12 at 15:35
    
You are talking relative to the displayed charge, when you should talk relative to the actual charge. The actual charge is physical, so you should take it as an independent value, instead of the displayed charge, which can be different from the actual charge, depending upon whether the iDevice is below or above 95%. –  duci9y Oct 11 '12 at 15:59
    
I am, but it's just semantics, the process is the same, we both agree on that. I chose the displayed value because that is what a user sees. –  stuffe Oct 11 '12 at 16:04
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.