Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

My HD died on my MacBook pro so I decided to change the HD myself. I didn't have the original snow leopard disc so got a copy from a friend. When I try to boot from disc (holding c) is runs the DVD drive, followed by apple symbol. After a short while, the apple symbol is replaced by a no entry symbol. Totally at a loss as to what to do. Tried different copies of the copied disc, but same issue.

Any thoughts?

share|improve this question
add comment

3 Answers

You need to use the disk that was shipped with your MacBook or atleast the orginal OSX disk for the same model.

share|improve this answer
add comment

Was your machine delivered with Snow Leopard? Apple made Lion and Mountain Lion machines either incompatible with, or block the installation of Snow Leopard - even refurbs that once could have run SL.

share|improve this answer
    
This is not always true, and especially not so with refurbished systems. This generally only applies to new hardware refreshes that occur after a new OS has been released. –  bispymusic Mar 4 '13 at 4:00
    
Correct but it is a possibility worth considering. –  JRobert Mar 6 '13 at 19:57
    
Reconsidering my previous comment: I recall inquiring about refurbed iMacs offered with 10.7+ that would, in their day, have been 10.6 capable, but which Apple Tech Support confirmed to me on the phone could no longer be downgraded. Their specific advice was, "If it is delivered with Lion/Mountain Lion, it would no longer be compatible with Snow Leopard." –  JRobert Mar 9 '13 at 22:42
    
Yes, that is the official Apple response. Any system made after a new OS release officially only supports the new OS or later. However, from my experience as an Apple sales rep, I have first-hand accounts of such systems often being downgradable still. –  bispymusic Mar 11 '13 at 20:57
    
Good to know - I needed a SL-capable machine (Apple refurb) and watched the refurb store for the occasional ones that would be delivered w/SL. Are they downgradeable simply by installing SL or do they need something else to enable it? –  JRobert Mar 11 '13 at 21:38
show 3 more comments

Is your friend's Snow Leopard disk one he got with a Mac, or one he purchased at retail?

Disks that came with Macs are hardware-specific, if it came from a different model/revision than your MacBook Pro, then it likely won't work.

Try your install with a retail disk (or a Lion/Mountain Lion installer on USB) and see if that works.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.