Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

Over the years, I've collected a few iPhone 4's and 4S's, as well as a couple iPad 2's and a new/third generation iPad. They're all equipped with an ambient light sensor that darkens the display in dark settings or brightens it in bright settings. All in all, this has proven to be a boon to me over the years, and made my experiences with the iOS family of devices a generally positive one.

However, I've noticed a consistent problem that still has yet to be addressed on any of them, and it seems like it wouldn't really be much of an issue for Apple to fix: Though it works without a problem (and very quickly) to adapt to the changes from a dark to a light room, none of my newer iOS devices will dim when moving back to a dark room; regardless of how much time I give them. The only fix to this particular issue being to shut off the screen, then turn it back on, which instantly sets it to its auto-dimmed state.

I won't accept that I've somehow managed to accrue a collection of the only iOS devices that have faulty ambient light sensors, and I know that it's not a fault of all of Apple's devices with the sensors (because my iMac, MacBook Air, and MacBook Pro will auto-brighten and dim all day long as the sun shines and then gets covered by clouds, only to emerge triumphant a few minutes later).

So what gives? Is there a fix that I'm missing? Is this a "feature"? If not, why hasn't Apple bothered to fix it?

For the record, this has been on every increment of iOS since 4, (unfortunately) including iOS 6 on the devices I use for development.

share|improve this question
2  
In his review of iOS 6, Anandtech spoke about the auto-brightness. You can read it on this page goo.gl/oiX3c after the second image and before Data Isolation. That may give you some more insight but he does say it does not work well on the new iPad. –  Alain King Sep 21 '12 at 14:08
    
Excellent article, thank you for pointing me in the right direction. Though it doesn't do much to fix the problem, it gives me hope for a fix for the future. Also, the problem seems to be afflicting my 4S as well. –  Terrance Shaw Sep 22 '12 at 12:20
    
@AlainKing Would you mind posting your comment as an answer so that I can accept it? –  Terrance Shaw Oct 10 '12 at 12:44
    
Done as requested, I did flesh it out a bit more so it makes more sense to people just reading the short version. –  Alain King Oct 10 '12 at 16:32

2 Answers 2

up vote 1 down vote accepted

In his review of iOS 6, Anandtech spoke about the auto-brightness. While he does not give you a complete answer to problem, he does explain that the brightness curve is not a logarithmic curve.

You can read it on this page goo.gl/oiX3c after the second image and before Data Isolation. That may give you some more insight but he does say it does not work well on the new iPad.

share|improve this answer

I have noticed that Auto-Brightness works much better on my iPhone then it does my iPad 2, but here are a few things you can check...

Go to settings > Brightness & Wallpaper

Slide the brightness slider to the left... Doesn't really matter where as long as it isn't all the way to the right (max brightness) mine is about in the middle, make sure the toggle for Auto-Brightness is set to on.

You can test it by:

Press the "Home" button and then lock your iPhone by pressing the "Sleep/Wake" button. Move into an area with bright ambient light and use your hand to cover the top third of your iPhone screen. Press the "Home" button and move the slider to unlock your phone. The screen should appear dimmed. Remove your hand from the top third of the display. If auto-brightness is working properly, your screen will get brighter.

You can read more about it here: http://techtips.salon.com/iphone-auto-brightness-works-3626.html

share|improve this answer
    
Thank you, but as I said: I've got no problems with the display brightening; it's just a matter of having it go back to darker levels when I go back into a darker room. Watching my wife's new iPad last night, I noticed that it eventually darkened after a good five minutes of inactivity or so. But at that point you might as well just lock the screen then turn it on again. –  Terrance Shaw Sep 21 '12 at 13:51
1  
Yeah your right... my iPhone takes forever to dim... not sure if that is to make sure you are not just passing through a low light area... or if it is a bug... –  TheX Sep 21 '12 at 15:24

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.