Ask Different is a question and answer site for power users of Apple hardware and software. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have my retina MacBook Pro running a Dell U3011 monitor via the HDMI port. Periodically, the monitor shows an error message:

Unsupported audio format
Please set the audio output on your audio player to Pulse-code modulation (PCM) if available.

People have suggested to use some other method of connecting the monitor to the Thunderbolt ports as a solution and this would work but in my case, I want to run this monitor from the HDMI port. Anyone have any suggestions?

share|improve this question
up vote 4 down vote accepted

Go to the Utilities folder in the Applications folder and open the Audio MIDI Setup application. Select the HDMI Audio Device connected to the Dell U3011 monitor. Configure the audio format to "44100.0 Hz" and "2ch - 16bit Integer". As far as my minimal testing shows, this should fix the issue.

share|improve this answer
I've changed setups once again but I will try this solution next time I have the Dell U3011 attached. – wuliwong Oct 17 '12 at 16:31
YES! This fixed the problem! Thank you! That stupid message was so annoying! – Gregory Bell Feb 6 '13 at 22:46
This should be marked as the answer. The problem was driving me crazy (same setup here, two displayport monitors and the third one via HDMI) and the instructions above work perfectly. – martona Mar 3 '13 at 0:42
I'll mark this as the answer, if it worked for other people. As I said before, I never actually have verified this worked. – wuliwong Jul 10 '13 at 4:25

Try opening up the Sound panel in System Preferences, and making sure something other than HDMI is selected for the output. If that doesn't fix it, try changing the "Line Out Source" in the monitor's Audio Settings. See the details in the manual here.

If possible, you may want to try using Displayport for this monitor, as you're limited to 1920×1200 connecting it via HDMI. Displayport would allow for the full 2560×1600.

share|improve this answer
yea, i'm actually running two thunderbolt displays in addition to this monitor, so this one has to go in the hdmi port. i know, it's ridiculous, but we have all these extra monitors at work. :) The sound is set to my headphones and the line out source option on the monitor is "grayed out". :/ – wuliwong Sep 6 '12 at 21:14

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.