Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

I have an early-2011 MacBook Pro that will not charge. The green light on the MagSafe connector is barely green.

Besides the fact that the system info tells me the battery is not charging, the battery is stuck at 39%. If I unplug the charger, the battery begins to get low and I soon as I plug the charge back in the battery stops dropping.

Some sites say that the problem may be in the logic board and some say that the problem may be in the battery itself. My notebook is always plugged and I never really had a chance to let the battery drain completely.

The system profile shows the battery condition as normal and that the ac adapter is not connected.

So, my question is: what should I try since my city does not have an Apple Store that I can take my notebook to? Is it possible that letting the battery die (forcing a cycle) could help in that case? Is there any way of testing if the problem is in the battery (since it is more affordable to change the battery than a logic board)?

EDIT

What I have done so far:

  • I have already left it to charge for several hours.
  • I have tried SMC reset more than 10 times already.
  • I have already tested with another charger.
  • I have changed the DC-In MagSafe board myself.

The ac adapter shipped with my MacBook is 65w. Will it make any difference to try with a 85w adapter?

share|improve this question

2 Answers 2

Please stop resetting your SMC. You can totally screw up your Mac by resetting it too many times in a row. But yes, it seems through what you tried, your logic board is likely the issue.

share|improve this answer
    
This is good advice. SMC and NVRAM reset are a one time thing. They either cure your ailment or move on. SMC and firmware resets/restores leave the machine vulnerable to a second failure. Sometimes they save a trip to the service desk, but are not a cure all for good fault isolation steps in troubleshooting. –  bmike Oct 6 '12 at 15:52

First off, make sure you're using an 85 W MagSafe adapter; MacBook Pros can use the 60 W that shipped with MacBooks, but won't necessarily charge while running. A Pro with a depleted battery won't boot from a 60 W until it has been left to charge for several minutes.

You said you tried a SMC reset - try it another 2-3 times, just to be sure.

What does System Profiler/System Information say under the Power section? Does the battery's condition show as normal?

share|improve this answer
1  
I have already left it to charge for several hours. The adapter that came with my mac is as 65, so I dont know why should I use a 85w one. I have tried SMC reset more than 10 times already. The system profile shows the condition as normal. –  Rafael Colucci Aug 27 '12 at 17:43
    
That is almost certainly an issue with the logic board. The 13" MBPs used the lower-wattage Magsafe adapters; the 15"s use the bigger 85W. –  da4 Aug 28 '12 at 17:06
    
@da4 Some 15" MacBook Pros (usually the lower-CPU-speed models) use 60-65 W adapters. –  CajunLuke Aug 31 '12 at 19:00

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.