Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

I just decided to upgrade to a USB 3.0 Hard Drive Enclosure. I regularly use my Airport Extreme to share the hard drive using an older enclosure. I know that the Airport Extreme won't have USB 3.0, but I expected it to be backwards compatible. Am I wrong, or is something else amiss?

I'm using this Thermaltake Max 5G, and it mounts when I attach it to a MacBook Pro running Lion.

share|improve this question
    
My first guess was a power issue, but that enclosure seems to be externally powered, so we can likely cross that off the list. How is the drive formatted? This Apple KB article notes that you can only use FAT or HFS+ formatted drives? NTFS and exFAT won't work. –  robmathers Jul 10 '12 at 1:21
    
@CanuckSkier It is externally powered. It is an HFS(+?) formatted drive -- and, as I noted, the very same hard drive will boot in an older thermaltake enclosure. Thanks for the note. –  pc1oad1etter Jul 10 '12 at 3:13
    
I asked a separate question related to the same setup, here: apple.stackexchange.com/questions/55975/… –  pc1oad1etter Jul 10 '12 at 3:13

5 Answers 5

up vote 0 down vote accepted

Per Thermaltake support:

The Airport Extreme Base Station cannot provide the proper driver support for the docking unit. The docking station was designed to be directly connected to a computer's USB port.

Not a very satisfactory answer, but I guess it is the answer. I expected it to simply function as USB 2.0 speeds, rather than not working at all.

share|improve this answer

I have an Airport extreme about 2 years old and have just bought a 4TB seagate USB 3.0 .. works perfectly.

Have you tried formatting it by plugging it direct to the Mac first?

J.

share|improve this answer
    
Interesting. I did not/have not reformatted the hard drive -- but it absolutely works when plugged in directly to the Mac. My Airport Extreme is about the same age. –  pc1oad1etter Feb 18 '13 at 16:46

Maybe the reason your MacBook can see it but not airport extreme may be because of the type of partition scheme - just read that you need to set it to GUID rather than DOS-style Master Boot Record - see here: http://lowendmac.com/2009/things-to-know-when-connecting-usb-hard-drive-to-airport-extreme/

share|improve this answer

Try plugging an old externally powered USB 2.0 hub into the airport extreme and then plugging the external drive into the hub. This is the only way I could get my new (Sept. 2014) USB 3.0 hard drive to work with my 5th generation airport extreme. The drive came with its own externally powered USB connector but it would not work with the airport extreme for some reason.

share|improve this answer

Any drives harddrives connected to the usb port on Airport Extreme must be in FAT32 or HFS+. If you plug it directly into the Mac USB port then an NTFS or DOS, fat 16 etc can be recognized also but to see an external on a network plugged directly into usb port of an airport extreme, it must be in HFS+ or FAT32 in order to see it over a network.

The reason the Mac sees it is because of the Mac OS file system. If you plug it into the Airport Extreme you won't see it unless it's formatted correctly. This is a "limitation" of the AE.

Faslane

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.