Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

My MacBook Pro (described below) fell 5 feet while it was powered on. Would the sudden motion sensor be able to turn off the hard drives in time? Also, can anyone recommend the best (free) hard drive diagnostic tools Mac OS X?

Thanks, Chirag

  Model Name: MacBook Pro
  Model Identifier: MacBookPro5,5
  Processor Name: Intel Core 2 Duo
  Processor Speed: 2.53 GHz
  Number Of Processors: 1
  Total Number Of Cores: 2
  L2 Cache: 3 MB
  Memory: 4 GB
  Bus Speed: 1.07 GHz
  Boot ROM Version: MBP55.00AC.B03
  SMC Version (system): 1.47f2
  Serial Number (system): W89241NW66E
  Hardware UUID: D62F2A33-E5BA-5208-B300-28730564D27F
  Sudden Motion Sensor:
  State: Enabled

System Software Overview:

  System Version: Mac OS X 10.5.8 (9L30)
  Kernel Version: Darwin 9.8.0
  Boot Volume: Macintosh HD
  Boot Mode: Normal
  Time since boot: 5:20
share|improve this question
This tool showed me a lot of interesting accumulated stats: binaryfruit.com/drivedx It is 10 days trial and it has some "full test" feature, than gonna run for ~150 minutes. –  Nakilon Mar 21 at 18:34

3 Answers 3

up vote 6 down vote accepted

I assume you are aware of the Shareware tools (Like the five mentioned in this article).

In any case, since you want the free option, you will have to rely in your common sense and the tools you have (this is also true for the Shareware options, which really don’t seem to add much at this stage). Most of the benefit of Techtool Pro and Diskwarrior is to have am emergency plan in place in case of hard drive failure. But that is to be done before the problem :)

Back to your case, I suggest you give Onyx a try to check the status of your HDD’s Smart status. Assuming you don’t hear strange noises in the drive, performing a full Clone to an external drive using Carbon Copy Cloner would provide you with an important piece of information: the computer can read your entire drive, block by block.

Both Onyx and OSX can verify your volume so I suggest you also perform a verify (using Disk Utility for example) and verify your permissions.

Finally, use AppleJack to execute some of the above tests to make sure that the OS is in Single User.

If after performing all of the above, you see nothing “out of the ordinary”, you don’t hear “strange click noises” or you don’t detect any strange slowness in your drive, you can assume that the drive has not suffered any damage.

But, all things said, I’d keep my backups up2date just in case. (You do have backups, don’t you?)

I’ve had drives fall from a desktop to the floor and survive for years without any problems, and some drives tipped 0.5 inches and instantly died. Hard drives are like unicorns. :)

share|improve this answer
Actually the behavior is not that unicornish if you think about it. The longer the distance it falls, the more time it can sense the acceleration and turn off the hard drives –  Chirag Patel Feb 20 '11 at 18:53
@Chirag Tho that's true for a Macbook with sensor, i'm talking about internal/external regular PC drives that fell from different altitudes with unpredictable results. –  Martín Marconcini Feb 21 '11 at 2:31

If you haven't already, you should pop open Disk Utility, select your drive, and click the Info button. Ensure that the SMART status is "Verified".

Of course if you hear any audible clicking or anything of the sort, then you'll likely want to order a new HDD now (then again, I figure you haven't heard any clicking, and are wanting to check the health of the drive to ensure it is okay).

share|improve this answer

I'll probably get this post deleted because I'm a bad boy (or something like that) but about the only "free" tool that's worth anything is smartmontools, IMHO. It's a free SMART monitoring application that comes from the Unix, BSD, and Linux world (OS X is based on BSD, in case you didn't know that). This tool can provide extensive SMART monitoring but it's command line which a lot of people don't like. Everything else costs money - I suppose some people have actual costs, like food, water, heat, mortgage, etc. etc.

I know this is an old post, and I don't know if I'm allowed to do this, but a guy on MacRumors.com has done a list of drive testing tools - but beware, most of these cost money! Here's a link (if I'm allowed to post it):


That's actually a really good report. Interesting that nearly no one commented on it. In any case, I think you get what you pay for. Tools like Disk Warrior and Scannerz are known to do very limited things but do an extraordinarily good job of doing it, while other "Swiss Army Knife" tools apparently do a decent job, but not really all that thorough. The author only identifies a few applications as "free."

Although I find SMART status useful, I wouldn't base my life around SMART reports and would recommend that people do web searches about the reliability of SMART testing before using it as a defacto standard.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.