Ask Different is a question and answer site for power users of Apple hardware and software. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I've started virtualizing Windows 7 on my Mac and I've realized 4GB of ram simply isn't enough for listening to music, surfing the web, virtualizing Windows, and running a compiler all at once.

The first thing I did was look on Apple's site and see what specs I needed to look for..I bought my iMac in the spring of last year so the specs for new ram are as follows: 1333MHz DDR3 (PC3-10600)

So I read that and thought, okay, and then I read their price, $ 200.00 for just 4 GB. Wait a second, maybe a little out of my price range. Then I hit up sites such as NewEgg, and found some pretty good deals; however, I found that some of them were labeled SDRAM and some SO-DIMM, and I guess my question to you folks is: What are the differences between SDRAM and SO-DIMM RAM, and which should I use for my iMac?

share|improve this question
up vote 3 down vote accepted

You're getting your terminologies mixed up.

SDRAM (Synchronous Dynamic Random Access Memory) is just the type of RAM on a DIMM. In your case as you've stated it's DDR3 (3rd generation of Double Data Rate)

A DIMM is a standard format Dual In-line Memory Module. These have different pins for the different types of memory specification, so a DDR3 module will have a different edge connector to a DDR2 module and so on. A SO-DIMM is a Small Outline version of a DIMM, hence the "SO". These were designed for laptops where full size DIMMs wouldn't fit.

Apple use SO-DIMMs in their iMacs now, so DDR3 PC3-10600 (10600 is the peak transfer rate, so going lower than this will be a bad thing for performance) SO-DIMMs are what you want to get.

share|improve this answer
Thanks man, really appreciate you taking the time with my question. – Jerrod May 11 '12 at 17:54

QUOTE FROM MAC BOOK PRO LATE 2011 Installing Additional Memory Your computer has two memory slots that you access by removing the bottom case. Your MacBook Pro comes with a minimum of 4 gigabytes (GB) of 1333 MHz Double Data Rate (DDR3) Synchronous Dynamic Random-Access Memory (SDRAM) installed.

Each memory slot can accept an SDRAM module that meets the following specifications:

  • Double Data Rate Small Outline Dual Inline Memory Module (DDR3)
  • format 30 mm (1.18 inches) 204-pin
  • 2 GB or 4 GB
  • PC3-10600S DDR3 1333MHz Type RAM

You can add two 4 GB memory modules for a maximum of 8 GB of memory. For best performance, fill both memory slots and install an identical memory module in each slot.

To install memory in your MacBook Pro: 1 Follow steps 1 and 2 beginning on page 37 to remove the bottom case. Important: When you remove the bottom case, you expose sensitive internal components, which can be affected by static electricity. 2 Before touching the memory assembly, discharge any static electricity from your body by touching a metal surface inside the computer.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.