Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

Here is my situation: I have a 2010 iMac that came with a Snow Leopard disc, which I installed. Then, when Lion was released, I upgraded to it. However, yesterday, I had to erase my entire HDD (because of a permanent kernel panic due to the removal of some vital OS stuff).

The problem is that now I can't install Snow Leopard again (so that I may upgrade to Lion) or install Lion without downloading it (my connection is VERY slow, it would take over a week possibly). I tried using the Snow Leopard disc, which I confirmed to work on a Windows machine, to install it. However, it just ejects the disc on my Mac, going to the new Lion thing after boot (where you can install it by downloading from Apple's servers). It does the same with a Lion disc that I burned myself. Holding C won't help, and the discs won't appear on the option boot screen.

What should I do? Is there any way to revert the firmware back to pre-Lion, so that I may install Snow Leopard and then upgrade?

Note: I only have a Windows machine working, not another Mac.

share|improve this question
add comment

3 Answers 3

I know it's an hold post but I didn't found solution anywhere so I post mine here. Apperently your Macbook (and my Macbook too ;) ) can't boot with the software in the live CD of Snow Leopard. What I did is that I took an external HDD, an old Macbook (not the pro) and install SL on the HDD. The important step is to boot the HDD FIRST ON THE OLD MAC and do the software update. After that you can boot your HDD on your Macbook Pro and copy it with Disk utility in your internal HDD.

Tought you could also do this procedure via Target mode ... but I didn't tested :)

Hope this post will be usefull for someone in the future.

share|improve this answer
add comment

Firmware shouldn't have anything to do with it. I was able to install SL while I had Lion on. Maybe there is some problem with your disk drive on Mac?

I haven't tried it but you might be able to use the disc from a network device but you will have to find more info on it. Also you might be able to revert the system sometime back using Time Machine. Have you looked into that?

share|improve this answer
    
I installed with the same disc before updating to lion, and putting it on windows shows it has files and folders in it (so it isn't scratched or anything). I could also put any DVDs on my mac before wiping out the OS, so the reader is fine. I don't use time machine (because I don't have anywhere to back up). –  bl00dshooter Apr 8 '12 at 22:18
add comment

There is definitely something wrong, what you've described sounds like exactly the right steps to solve your problem, either you're doing something wrong or the disk is damaged or your Mac's optical drive isn't working.

Hold down the option key while booting your Mac, and insert the Snow Leopard install disk. It should show up after a minute (maybe you have to press "refresh"? I can't remember), and you can boot from it. Before installing, it's probably a good idea to use Disk Utility to repartition and erase your hard drive, specifically to remove the recovery partition that Lion has created for you (it will be recreated if you install Lion again later).

Failing that, you can try booting from the Snow Leopard install disk using another Mac to see if it's working, or try using someone else's install disk on your Mac. You might also try duplicating the disk on your Windows pc (using an app that does a low level/raw disk copy, not just a file copy — which will not work).

If none of that works for you, perhaps take your Snow Leopard install disk in to an Apple store or Reseller and tell them you can't get it to boot, maybe they will be willing to test the disk for you and perhaps give you a new one (for free if they're really nice).

You can also use someone else's Mac to download Lion (open the App Store on their Mac, log out of their account, log into your account, go to Purchases and click download on Lion, then log out of your account. Remember to log out of your account! otherwise they might accidentally buy apps with your credit card). Once you have the Lion install package on their Mac, right-click and Show Package Contents on it and drill through the folders until you find the InstallESD.dmg file. Use Disk Utility to copy that DMG onto a DVD or USB memory stick (use the "backup/restore" feature to copy the DMG's content onto the disk). Old Macs can't boot off a USB memory stick, but all recent ones can.

I've been told most Apple Stores are willing to do the above for you if you explain you've got a slow internet connection at home.

share|improve this answer
    
If I hold option to the selection screen (it takes several restarts for it to appear; most of the times it just skips to the lion instalation page) and then insert the disc, it will read for a few seconds and then eject it. I don`t know anyone else who owns a mac. I might take it to an apple store (since I`ve got apple care) later. I`d like to avoid that if possible since, you know, it`s a 21.5 inch iMac which is heavy. –  bl00dshooter Apr 9 '12 at 9:20
    
You have to restart several times to get the option selection screen to appear? There is definitely something wrong then. Sounds like you are having hardware problems. I don't think this is a solvable problem, more likely you need to get it replaced under warranty (or buy a new mac if it's out of warranty). –  Abhi Beckert Apr 10 '12 at 4:15
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.