Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

Really wanted to get Windows 7 working on my Mac for some Windows-specific applications.

Essentially, I followed all instructions after having updated my Mac's EFI Firmware, and have been left with a blank screen when it should be installing Windows. Running Lion with all updates applied, and booting off an external optical drive due to my Mini not having one.

Has anyone experienced a similar issue? Is it perhaps to do with my display?

Many thanks

share|improve this question
    
Do you get what looks like a prompt in the top left hand corner? –  Stu Wilson Jan 28 '12 at 17:08
    
On the black screen? Or in OSX? I get nothing on the black screen at all. –  seacode Jan 28 '12 at 17:15
    
Which version of Windows 7 32/64 Ultimate/Other you are trying to install and whether it is a retial version or other like MSDN install –  Stu Wilson Jan 28 '12 at 17:19
    
Windows 7 Professional, 32 Bit - from the Microsoft Partner Program –  seacode Jan 28 '12 at 17:23
    
Provided on a DVD-ROM –  seacode Jan 28 '12 at 17:26

3 Answers 3

this link identifies an black screen issue when installing Windows 7 on some iMac's, it may be relevant even though you have a Mac Mini

this link is the Apple FAQs for Installing Windows 7 in Bootcamp, there are some good resources there for the main issues most users meet.

this link is the Apple Install Guide for Windows 7 which I think you have already been following, but I'm linking it here for other people if required.

share|improve this answer
    
Stu, thanks for these - but I'm still not getting anywhere. After holding down the option key and waiting for the computer to boot the disc, the CD drive sounds like its starting up then just stops, leaving me with a blank screen. –  seacode Jan 28 '12 at 17:49
    
Seacode, Is the DVD a pressed DVD or one burnt from a ISO downloaded from TechNet? Secondly, what version of Bootcamp is installed on your Mac? –  Stu Wilson Jan 28 '12 at 21:24
    
It's a pressed DVD - I'm not too sure about the version, but there are no outstanding updates available for the Mac. I have a feeling the external drive is something to do with this? It's a USB external from Samsung. –  seacode Jan 28 '12 at 22:53
1  
If you have a spare USB drive anywhere, have you considered creating a bootable USB drive with the installer? –  Stu Wilson Jan 29 '12 at 12:25
up vote 0 down vote accepted

Essentially the answer is to create a bootable USB drive, by copying the boot sector from the original CD/DVD using bootsect. You can then drag and drop the contents of the original DVD onto your pendrive and away you go.

This blog post really helped me: http://liza.id.au/installing-windows-7-through-boot-camp-with-no-optical-drive-on-a-mac-mini/

share|improve this answer

Just another possible answer for anyone else with a similar situation to mine....

I'd been battling all night thinking there was issues with my USB stick etc or some weird partitioning problem etc. In the process I think I've understood a lot more about how my Mac Mini (Late 2014) boots now for Boot Camp.

First, I thought the USB stick it prepared (I was using Windows 10 Preview ISO) was the actual boot device. When my computer rebooted for Windows it was simply going to a black screen so I figured the USB boot wasn't working. Not so. The boot partition is part of the partition that the 3rd tick box does in BCA, which seems to tell the Mac "use this boot loader (EFI) in the partition I created, and use for the USB disk you just created for the install files" - so it purely uses the USB as a storage device for the Windows install.

It's important to note that it's obviously a damn good idea to remove other USB devices from the system during this process, or it may boot and pick the wrong USB device.

Anyway back to the black screen. So it turns out everything had been installed and partitioned correctly, and my Mac mini was booting into the new Windows boot partition, but using HDMI output! So the black screen I was seeing was because it was outputting the display to HDMI, not my VGA monitor via the display port adapter.

This was only for the initial "Setup Windows" phase - once Windows had installed its files (remember to select the BOOTCAMP disk listed, format it, and then choose it for the install) it rebooted as Windows installs normally do (note to self, hold down option here so we can choose Windows boot again). Once it was booting and finishing the install for the 2nd time, it activated the VGA display (presumably has drivers now). It continued installing and then again rebooted for a 3rd time (this time it went back into the Windows boot automatically), again via VGA. My bluetooth keyboard and mouse were also activated at this point (had to use wired mouse for the very first initial setup part).

Once Windows 10 was fully installed I manually ran the Bootcamp/Setup.exe on the D: disk (my USB stick) which seems to have installed the rest of the drivers (Wireless driver for WiFi, correct display driver, sound driver, chipset etc). It also installs Boot Camp systray icon to let you restart back into OSX.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.