Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

I have a macbook (2.26 GHz Intel Core 2 Duo upgraded to 8GB 1067 MHz DDR3 RAM) running OS X version 10.6.8. I do a lot of prototyping for high performance computing on this macbook (running c++, fortran, mathematica, matlab, etc) and often work in parallel.

I have noticed that my computer gets hot so I have installed 'Temperature Monitor' and find that, when running difficult jobs, it can break into the 90 degree (C) range. I know this is not good, but is this incredibly dangerous? after seeing what values should i begin to get worried?

Secondly, I would like to clean (and maybe even replace?) the fan to make sure I am getting the best ventilation possible. Will a can of compressed air do the trick? how expensive/worthwhile would it be to open up the case and replace the fan?

Any help would be great - thanks!

share|improve this question

1 Answer 1

up vote 3 down vote accepted

90˚c is typical for that system under high load; anything > than 95˚c is when you might want to be concerned. If the CPU gets too hot, or starts to overheat, the system (typically) will clock down the CPU to prevent overheating. The fans shouldn't wear out, so I don't really see any point in trying to replace what's not broken. Intel Mac's run hot, and the fact that the only fan is an output fan doesn't help with heat dissipation.

Something you could do to help alleviate some of the heat is to download smcFanControl (free) and adjust your fans RPM. Instead of the standard 1800 RPM set it at 3500-3600 RPM, which should help cool down the temp possibly 2-10˚c. You might notice more noise from the higher RPM, although you shouldn't worry about it — MacBooks fans generally max out at around 6,000 RPM, and I've cranked one up to 8,700 RPM before.

share|improve this answer
thanks for the help. i will try not to get scared until i break 95! –  Laurbert515 Jan 20 '12 at 23:49
well, just running some work on mathematica, it broke 95 - it got up to around 100 before i quit the kernel. is there anything else i can do to keep it from running hot? –  Laurbert515 Jan 21 '12 at 0:08
@Laurbert515 — can you post a screenshot of the temperature readout, and did you try the smcFanControl? Also, what type of area is the MacBook in, meaning is it on a desk next to stuff / ventilation / etc. –  l'L'l Jan 21 '12 at 1:17
not quite sure how to post the screenshot on temp readout and don't want it to get up to +100 again anyway! it hit that temp while using "temperature control" (an alternative to smcFanControl) and my laptop is on a desk. –  Laurbert515 Jan 21 '12 at 17:27
Without knowing other specifics such as the load it's running when it gets hot, the app your using to monitor it, etc. I can't really suggest anything else. Using compressed air might help as you mentioned, if there is debris built-up inside your Mac. It would probably require you open it up though to effectively get rid of it all. –  l'L'l Jan 22 '12 at 23:59

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.