Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

I have a Late 2010 MacBook Air, and it has a 256 GB SSD, 2.13 GHz processor, and 4 GB RAM. It has been lightning fast ever since I bought it and I upgraded to OS X Lion and it was super fast. Boot time was 10-12 seconds (time to get to login screen), shut down time was 3 seconds.

During the last couple of months, my MacBook Air seems to be have slowed down regarding boot time and shut down time. Current boot time is 50-60 seconds, and shutdown time is 10-15 seconds.

I do not know the reason for this. Applications don't seem to have much lag though. It is my boot time that is a MAJOR problem!

I recently cleared a lot of useless memory on my computer and emptied the trash, and cleared the cache memory (with an app), and computer has a LOT of free space and no applications are loaded on start-up either.

Can anyone tell me how to get back the original boot time performance?

share|improve this question
1  
"But suddenly, the last couple of months..." :D –  gentmatt Jan 7 '12 at 18:29
    
haha.... lol :D –  Legolas Jan 7 '12 at 18:34
    
If you boot in verbose mode, you can see the Kernel output as well as the whole boot taking place, maybe this can help you determine what is "taking time". Of course disconnect everything and leave only the power connected, it could be an external device that is slowing everything down. –  Martín Marconcini Jan 7 '12 at 20:20
    
Can confirm that it was the CANDLEAIR preference panel that was causing a 30 second shutdown delay on my Mac Mini. –  user26331 Jul 30 '12 at 19:21

5 Answers 5

Issue: After entering the password the computer would appear to freeze and become unresponsive. After about 20 mins it would eventually log in. User was claiming that browsing the internet was very slow and he could only access one page at a time.

Resolution: I had unbound the mac from the Active Directory domain and it fixed the issue. As it turns out the computer name had been removed from the AD Computers list.

share|improve this answer

Check your network configuration.

Delete any interfaces that you don't need. If you have IPv4 configured manually, make sure your IP address and DNS servers are correct. Run Console.app and check your system log for problems during boot up.

As an experiment, create a new Location called "None" with all networking disabled (delete all of the interfaces), select that and then reboot. If it boots faster with networking disabled, then you know something is wrong with your network settings.

share|improve this answer
    
Very good troubleshooting step - especially with corporate macs that depend on active directory or network accounts. –  bmike Sep 18 '12 at 13:45

Also, you could try verifying the disk.

Open Disk Utility. Click on Macintosh HD in the sidebar. Then click Verify Disk. If there are any errors then click Repair Disk.

Then you might want to also try clicking Verify Disk Permissions and then Repair Disk Permissions

If after doing all this and there is no improvement try backing up your folders and files and doing a clean install. In other-words, completely erasing the whole hard drive and re-installing the operating system from the install disk.

share|improve this answer

Try Resetting PRAM and NVRAM

  1. Shut down the computer.

  2. Locate the following keys on the keyboard: ++P+R. You will need to hold these keys down simultaneously in step 4.

  3. Turn on the computer.

  4. Press and hold the ++P+R keys. You must press this key combination before the gray screen appears.

  5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.

  6. Release the keys.

  7. Set the startup disk in system preferences and reboot again to test the timing.

share|improve this answer
    
Nope. Doesn't solve the problem :( –  Legolas Jan 7 '12 at 18:50
    
Maybe this can help? support.apple.com/kb/TS3571 –  gentmatt Jan 7 '12 at 18:52
    
Nope. Already saw that. :( –  Legolas Jan 7 '12 at 18:54
1  
Even though this isn't the case here, this is the most common reason for adding 30 seconds to a typical boot time. Be sure to re-select your boot drive in the system preference startupmdsk pane after resetting the NVRAM to avoid these boot delays. –  bmike Sep 18 '12 at 13:43

The easiest step to take would be to install a clean OS onto an external USB drive so you can assure yourself the hardware is working properly. Yes the internal drive is way faster (when working properly) than an external, but a clean install to even a slow bus powered 2.5 inch drive should be far faster than your benchmark.

If that is as slow or slower than your timings - have it repaired. If not, you can back up and zero the SSD. Hopefully your drive and OS support TRIM and at will allow the controller to mark the entire drive as clean again. Also, this will ensure you don't have a software delay.

Once you are sure the hardware is speedy again, restore your backup.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.