Ask Different is a question and answer site for power users of Apple hardware and software. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Sorry in advance about what seems like a trivial question. However, I've recently switched from PC to Mac, and while I'm really happy about the switch, this is one of the few issues I'm struggling with.

On a PC, the most important shortcuts are CTRL-A (select all), CTRL-C (copy), and CTRL-V (paste). Almost all the other important shortcuts also use the CTRL key.

On the PC keyboard, the CTRL key is in the bottom left corner of the keyboard. So, it's very easy to hold it with your pinky, while keeping your hand in its normal position, so you can easily press the other key required for the shortcut (e.g., A, C, V, etc).

On a Mac, the "equivalent" key to CTRL is Command. However, I can't easily reach that key with any finger - especially without moving my hand from its normal position - so, I can't easily press Command-C or Command-V without really focusing on it.

Is this just a result of years of practicing on a PC? What finger do Mac users use to click the command key when executing a shortcut?

share|improve this question
So what did you end up doing? I am in the same boat. I realized that my muscles around thumb gets really tired when I am coding continuously for 4 to 5 hours. In past this has never happened on regular windows keyboard layout. – bits Jul 7 '15 at 0:27
up vote 17 down vote accepted

You can use either thumb to hold down a key and then use another finger to access the other key. You just have to get used to sliding either thumb a little to the left or to the right of the space bar.

Yes, this is just a result of years of using a PC.

share|improve this answer
Apple suggests not rolling the thumbs under your wrists in their manual. I believe they are trying to prevent (some) people from getting carpal tunnel syndrome and other debilitating hand injuries. I would strongly advise to listen to the manual on this one. – Zombies Jun 1 '15 at 14:41
I have gotten a smaller hand injury on this one, because you are twisting your thumb in a bad posture, so this should absolutely be avoided! – Kevin Simper Jul 17 '15 at 8:37

I mostly use my thumb. If I'm trying to hit a key that's more in the middle or right side of the keyboard (such as C or V), I use my ring finger.

Note that I'm a horrible typist, so I never use the right key. If you're comfortable using that, you can probably just use your thumbs.

share|improve this answer

When I first made the switch to Mac I used System Preferences -> Keyboard to switch the ⌘ key with ^ (control) key. That worked for a while until I became more comfortable with the basic two-key commands. Once I started using more complex three and four key commands I had to put it back to default because I needed the labels on the keys at first to remember what the symbols <-> key mappings were.

share|improve this answer

It's easier to type shortcuts if you use Sticky Keys as well. This way you can type shortcuts one key at a time, which might sound slower, but isn't if it means you can keep your hands in position and your eyes on the screen.

I tend to use my thumb for command. I use my left pinky for control, shift and Fn, although it may be different for others as I keep my pinkies over the row below the home row. Alt is tricky, but I guess the pinky makes the most sense for me personally, usually.

There's nothing wrong in using different fingers at different times. For instance on the rare occasion I want to show the Dock (⌃⌥⌘F) I move my arm and use index on cmd, middle on alt and ring on control, then type the D afterwards.

share|improve this answer

I also thought it was inconvenient at start but later realised how good it is with the command button. I learnt to type on a keyboard with no markings which requires you to have all keys memorised and your fingers on the right position on the keyboard. By using the command button with your thumb (which is regularly only used for the space ), your fingers are always positioned correctly on the keyboard. Using the control button, you HAVE to use your pinky finger which makes your fingers leave the correct position, which in the end makes you look at the keyboard!

(by correct position i mean, pinky on A, ring finger on S, middle finger on D, long finger on F etc.)

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.