Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

If the new 2011 iMac is equiped with SSD and HDD at the same time, is HDD running (so fan on) even at times when HDD not used for a longer period?

Context: I need the computer to be really silent (bedroom), and only when exceptionally accessing e.g. video files to use HDD. So if HDD would run all the time, I would rather go for an option of sole SSD in iMac and external HDD which can be unplugged. Otherwise I would go for both in iMac.

share|improve this question

3 Answers 3

Definitely make the SSD your boot/app disk and set your computer to put hard disks to sleep. But even then there are many factors that can cause the drive to spin up even. Sometimes just getting an open dial box will cause it to spin up.

I'd first make sure your HDD is not shown in the sidebar - if it is there it will definitely spin up every time you get a save or open dialog box or a finder window.

Even after doing that I still had it spinning up more than I wanted so I followed this blog post on Dae’s blog to make an apple script that will unmount or mount it so I can explicitly control when it sleeps or doesn't sleep. Incase the link dies, here is the script. It even does Growl notification:

set myVolumeLabel to "Storage HD"

tell application "GrowlHelperApp"
    set the allNotificationsList to {"Disk mounted", "Disk unmounted"}

    register as application "Disk Mounter" all notifications allNotificationsList default notifications allNotificationsList icon of application "Disk Utility.app"
end tell

tell application "Finder"
    set diskDev to do shell script "diskutil list | grep \"" & myVolumeLabel & "\" | grep -o 'disk[0-9]*' "
    if not (disk myVolumeLabel exists) then
        do shell script "diskutil mountDisk " & diskDev
        tell application "GrowlHelperApp" to notify with name "Disk mounted" title "Volume mounted" description "Disk “" & diskDev & "” with volume “" & myVolumeLabel & "” has been successfully mounted." application name "Disk Mounter" icon of application "Disk Utility.app"
    else
        do shell script "diskutil unmountDisk " & diskDev
        tell application "GrowlHelperApp" to notify with name "Disk unmounted" title "Disk unmounted" description "Disk “" & diskDev & "” with volume “" & myVolumeLabel & "” has been successfully unmounted." application name "Disk Mounter" icon of application "Disk Utility.app"
    end if
end tell

One thing to note - this unmounts ("ejects") an entire drive - not just a single partition.

share|improve this answer
    
Didn't test it yet, but if it does as you say (and there's no reason it doesn't :p) that's a great solution for me too (battery saving on a mbp with SSH+HD). –  Cedric H. Sep 9 '11 at 5:49
1  
Battery savings on a MBP with the HD+SSD is actually why I did it too. I also use a modified version of the script to automatically unmount a full Lion bootable installer (not a net install) partition on my HD. I like that better than the net-only install recovery partition that Lion makes. When I get a chance I'll look into how the Lion recovery partition is made invisible and do it that way, but for now this works well. –  cftarnas Sep 9 '11 at 6:20

Have you checked off the "put the hard disk(s) to sleep when possible" in the energy saver preference pane?

enter image description here

share|improve this answer

Pavel,

That would depend on how you set up your machine.

If you have you system installed on the SSD drive, and just use the HDD for additional storage then the HDD should only spin up when you access that information or if you have Time Machine backing up to it.

Using the SSD as your main drive should keep the machine cooler to as there are no moving parts to get warm, so the fans should also be spinning much slower.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.