Reducing heat by adjusting the lid
Having the lid closed or open does not impact the airflow of your MacBook Pro (MBP). Ambient air is never in short supply and the "exhaust" (where the hot air picked up by the blade fan(s) are expelled) is located at the back of the unit (the black stripe on the newer models and the grey stripe on the first generation machines).
Some claim that keeping the lid open allows the chassis to cool down, but these claims have never had any real data behind them (simply anecdotal evidence and unsubstantiated rumour). Personally, I have a 2006 MBP that was eventually relegated to being a desktop. I ran the system for well over a year with the clamshell open, and then closed, and saw no different in CPU/CPU temps (nor any variability in the other heat sensors) as a result. Moreover, the newer models have far more efficient blade fans and would suffer even less from the effects of heat (additionally, the new Intel chipsets run cooler than their predecessors). You can conduct your own testing of course. I had replaced the heat sink, re-applied a sane amount of Arctic Silver thermal paste, and used Lobotomo Fan Control daemon to monitor my system's temperature.
Disabling the internal display, properly
There are two ways to connect a secondary display to your notebook without enabling the default screen (note that this does not mean dimming it, but rather turning it off).
- The first is to connect the display with the lid closed when the
machine is powered down. Once the external display is connected, turn the machine on—it will
detect the secondary display while leaving the internal one turned
off. This will alleviate the issues you have with "dragging things
off the screen" as the system will constrain your desktop to the one, active
- The second is to connect the secondary display when your system is
awake and active, and the clamshell open. Once you connect the
secondary monitor, the system will recognize it. Once it does, close
the lid on your notebook. The device will be put to sleep. Once that
happens, move your mouse, or hit a key on your keyboard to wake it.
Once it wakens, it will enable the secondary display, but not the
Additionally, you may set the attribute to leave the system in the sleep state even if the clamshell is opened. You can do this using pmset, a local utility found on OS X that actually handles all your power settings. You can accomplish this with the following command:
sudo pmset -a lidwake 0
The -a, -b, -c, -u flags determine whether the settings apply to battery ( -b ), charger (wall power) ( -c ), UPS ( -u ) or all ( -a ).
To reverse the command, set the 0 to a 1. These settings are persistent, in that, they do not need to be re-applied every time the machine's power is cycled and are saved to the file: