Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

My Macbook does not power up for more than a few seconds, and I have declared it dead. The only issue is that there is still a disk inside of it of Snow Leopard. The MB doesn't power on long enough to push the trackpad button, or do the PRAM Reset, or press the Eject button on the keyboard before shutting down again. Any ideas how to MANUALLY remove the disk?

share|improve this question

2 Answers 2

Kind of a shot in the dark, but one reason a MacBook won't start up at all is that the battery is so dead that it tells the Mac not to run. Some models allow you to still run the computer with the power adapter attached and the battery removed. Have you tried that? If it works, you can keep things running long enough to eject the disk.

You can also (kind of a desperation move) work a thin bit of plastic (thinner than a credit card) around in the slot to try to get it under or on top of the disc and work it back and forth until the disc pops out.

share|improve this answer
    
Battery was out, PSU was plugged in and was showing Green. It only starts up for about 1-5 seconds, depending on how long I leave it UNPLUGGED for. I know there's something wrong on the motherboard, probably a capacitor or two, but I need a mechanical way to eject the disk –  Canadian Luke Aug 9 '11 at 20:09

Get a standard USB mouse, attach it and press and hold the primary mouse button, while starting. This invokes the eject before the blutooth drivers are even loaded.

share|improve this answer
    
Tried, but it wasn't a bluetooth mouse; it was the built in trackpad –  Canadian Luke Aug 9 '11 at 20:08

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.