Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

How do I increase render speed on FCE? I have several overlaid HD video tracks, and it is SLOW.

EDIT: I am on a MBP 13", 2.3 GHz Intel Core i5, 4GB 1333 MHz DDR3. The render disk is an external USB drive.

EDIT: I found out that FCP has a feature that allow you to only render video to a certain quality (or bit rate...something like that). Does FCE have a feature that does this same thing?

EDIT: Oh, and...if I upgrade to FCE 4, will rendering be faster?

EDIT: I am on FCE 4.

share|improve this question
    
So, is this perhaps to do a "draft" render so you can view the video and see what changes to make, and in the end you will render in the standard way for the final product? –  GEdgar Aug 24 '11 at 15:35
1  
Can you tell if you are CPU bound or io bound? Open activity monitor and see what read/write speeds you get copying a rendered file from the internal to the external. Quit all apps except FC and report what portion free+inactive RAM is of the total. –  bmike Aug 24 '11 at 22:46
    
@bmike I will let you know when I export something. –  daviesgeek Aug 25 '11 at 19:51

5 Answers 5

I imagine the USB disk is probably a source of the bottleneck. Try using a Firewire 800 disk.

share|improve this answer

Adding RAM is usually the cheapest way to improve speed. I went from 4 GB to 12 GB in my iMac and FCPX improved dramatically.

Also I recently upgraded from a USB Drobo (1st Gen) to a Firewire 800 Drobo (2nd or 3rd Gen) and my disk speeds increased a lot.

A few other quick things: Make sure you're not running any other apps when FCE is running. And you should run a utility like Onyx or Applejack to clear up any file permissions issues or other cruft that comes from running a modern OS.

share|improve this answer
    
Ok, I am not exactly looking to buy anything else, but it's a good tip. Thanks! –  daviesgeek Aug 24 '11 at 22:44
    
I wouldn't bother with onyx/applejack or permissions as they cause pass/fail issues, not speed issues. We need to know your ram summary to tell if RAM is constrained. –  bmike Aug 24 '11 at 22:48

What version of FCE are you running? It sounds like it's less than version 4. If you're running anything less than version 3.5, it's a PowerPC version, and thus is running a lot slower than it would be if you ran v3.5 or higher, which is Intel-native. Can't guarantee this is your problem, but it's what I would check first.

share|improve this answer
    
Although my post says 3.5, I am now running 4, and it still has some problems. –  daviesgeek Aug 24 '11 at 17:22
1  
Edit that, p'haps? –  Mahnax Aug 24 '11 at 18:02
up vote 1 down vote accepted

Ok, so after much research, I finally found out that the reason it was taking so long to export was because I was exporting from the external drive to the external drive. I fixed the problem by exporting from the external drive to the internal drive. I am also probably going to switch to a Firewire 800 drive.

share|improve this answer

Convert all footage to The Apple Intermediate Codec ( AIC )first before importing. Makes a big difference in rendering time. Use MPEG Streamclip to convert

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.