Take the 2-minute tour ×
Ask Different is a question and answer site for power users of Apple hardware and software. It's 100% free, no registration required.

(This question is related in goal, but not method.)

Shortly after launch, I bought the new Apple TV. A few months later, my girlfriend and I broke up and the HDTV went with her. Apple TV returned to his box, never to be seen or heard from again. I know, terrible!

I've been pondering how I could send tunes to the stereo in my office without running a 20ft cable to my headphones jack, since all the error noises would be pretty disruptive and whatnot. Then I remembered, Apple TV has a Toslink port.

I think that using this, this and this, I should be able to just AirPlay from iTunes. I'm worried, though, that the set-top box might be a bit offended that I don't plan on giving it an HDMI buddy.

Has anyone done this before?

share|improve this question
    
What input does your stereo speaker / amplifier system take? –  bmike Jul 17 '11 at 18:36
    
RCA, hence the toslink -> RCA conversion. –  wjl Jul 18 '11 at 4:32

2 Answers 2

up vote 1 down vote accepted

Even if the AppleTV functions without the HDMI connected, you will have no way to figure out what's going on when you have problems or when the AppleTV pops up a dialog such as the "Update available, update now or later?" dialog.

I suggest you sell the AppleTV and buy an Airport Express, which is designed to do what you're trying to accomplish. The Airport Express can be managed by any computer on the same network. Yes, you will lose a little money this way but you may find that it's no more than you plan to spend on the converters and cables for the AppleTV.

share|improve this answer

I know for sure Apple TV works fine with AirPlay to send audio out the Toslink (digital optical) with or without a HDMI cable connected.

The converter you linked to seems to take RCA (electric) digital signal and turns it into Toslink (optical) digital signal so I doubt that's exactly what you want to get to a headphone jack with analog stereo (electric) signal.

Since it's not clear what input your stereo wants, it's unclear if everything will work, but the Apple TV will work as you ask.

I have this setup (but Toslink to my speaker) as well as a second stereo connected via bluetooth and a Belkin receiver that connects to the normal 1/8" headphone jack. That might be cheaper than cables and an adapter if the distance is 30 feet or less.

share|improve this answer
    
Thanks for the heads up on that adaptor. Looks like I need this one instead: monoprice.com/products/… –  wjl Jul 18 '11 at 4:34

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.